The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-12-2023, 06:53 PM   #1
MrBeast
high-Tech Red Neck
 
MrBeast's Avatar
 
Join Date: Feb 2008
Location: Livingston, MT/On my boat WA/BC/AK
Posts: 2,294
1963 C50 Clutch issues?

Howdy guys!

I am currently looking at buying a 1963 C50 that I found for sale, the problem is that it has a non functioning clutch. Owner says that he replaced the Master Cylinder, apparently these trucks had a combined cylinder for the clutch and brakes?

He says he thinks the slave cylinder is bad, it sounds like he is tired of messing with it, but it is not a system I have ever messed with.

I am wondering if parts for it are available and if there are any upgrades that are recommended? Ideally I would like to just put a hydraboost on it with a separate slave cylinder, not sure if anyone makes off the shelf parts that can do this or if I would have to fabricate it?

The truck is really clean, almost no rust and just a couple of dents, but it is also 500 miles away from me which complicates things as it is a bit larger than any trailer I have access to (which is why I am looking at getting it to build a tow rig)

Any insight here would be greatly appreciated.
__________________
"He used to be a pretty nice feller, now he's a welder!"
MrBeast is offline   Reply With Quote
Old 12-12-2023, 09:20 PM   #2
62c30
Registered User
 
Join Date: Jan 2017
Location: Derby Kansas
Posts: 386
Re: 1963 C50 Clutch issues?

If the slave and master is the same as my 62 c30 yes they are available. I have not messed with anything bigger though. Just make sure to get a new one or a reman that has been sleeved. I had put a rebuilt one on and it was pitted pretty bad and the fluid would bypass and it didn't work very good.
62c30 is offline   Reply With Quote
Old 12-13-2023, 07:16 AM   #3
Agv63
Registered User
 
Join Date: Jan 2023
Location: Johannesburg South africa.
Posts: 78
Re: 1963 C50 Clutch issues?

Funny this should come up for discussion.
I actually looked at a slave cylinder this morning on amazon forr my buddy as his one is worn out.

Link attached.

Adriaan.


https://a.co/d/h0P1q6c
Agv63 is offline   Reply With Quote
Old 12-13-2023, 10:36 PM   #4
MrBeast
high-Tech Red Neck
 
MrBeast's Avatar
 
Join Date: Feb 2008
Location: Livingston, MT/On my boat WA/BC/AK
Posts: 2,294
Re: 1963 C50 Clutch issues?

Thank you for the info.
__________________
"He used to be a pretty nice feller, now he's a welder!"
MrBeast is offline   Reply With Quote
Old 12-13-2023, 10:38 PM   #5
MrBeast
high-Tech Red Neck
 
MrBeast's Avatar
 
Join Date: Feb 2008
Location: Livingston, MT/On my boat WA/BC/AK
Posts: 2,294
Re: 1963 C50 Clutch issues?

Quote:
Originally Posted by 62c30 View Post
If the slave and master is the same as my 62 c30 yes they are available. I have not messed with anything bigger though. Just make sure to get a new one or a reman that has been sleeved. I had put a rebuilt one on and it was pitted pretty bad and the fluid would bypass and it didn't work very good.
I was kind of surprised as this will be my first 60-66, The oldest I have had before this was a 67, and everything up till the 80's had a mechanical clutch.

I saw that CPP makes a vacuum booster kit, and found a video of the install, it seems to me I could do the same thing with a hydroboost, then would need to run new line which is a good idea anyways.
__________________
"He used to be a pretty nice feller, now he's a welder!"
MrBeast is offline   Reply With Quote
Old 12-14-2023, 03:39 PM   #6
Wrenchbender Ret
Registered User
 
Join Date: Oct 2005
Location: Overland Park, Ks.
Posts: 5,229
Re: 1963 C50 Clutch issues?

This system is easy to work on & is a good dependable system. You can put a kit in the present cylinder. These cylinders generally don't get pitted very badly as they get a full stroke every time they are used. A run with a wheel cyl. hone & a repair kit & bleed the system, should fix it up.

George
Wrenchbender Ret is offline   Reply With Quote
Old 12-15-2023, 12:29 PM   #7
Pick121
Registered User
 
Pick121's Avatar
 
Join Date: Jan 2021
Location: Tahoe City, CA
Posts: 166
Re: 1963 C50 Clutch issues?

Mr. Beast! There is a ton of great info here on 60-66 but I also welcome you to raise the question on the Heavy Haulers Forum “Beyond C30…the Heavy haulers!” http://67-72chevytrucks.com/vboard/f...play.php?f=239
Those folks are very well equipped to answer C50 questions.
I also have a ‘64 C10 and a ‘63 C50 so I jump from forum to forum.
A photo of the firewall would help and also what engine and trans it has. My ‘63 C50 has a separate Master Cylinder and clutch but I have seen the combined MC and Clutch on ‘62 and earlier.
Here is how mine is, stock setup, the combo system will have 2 metal lines from the bottom of the MC
Attached Images
 

Last edited by Pick121; 12-15-2023 at 12:34 PM. Reason: Missed info
Pick121 is offline   Reply With Quote
Old 12-16-2023, 11:41 PM   #8
MrBeast
high-Tech Red Neck
 
MrBeast's Avatar
 
Join Date: Feb 2008
Location: Livingston, MT/On my boat WA/BC/AK
Posts: 2,294
Re: 1963 C50 Clutch issues?

Quote:
Originally Posted by Pick121 View Post
Mr. Beast! There is a ton of great info here on 60-66 but I also welcome you to raise the question on the Heavy Haulers Forum “Beyond C30…the Heavy haulers!” http://67-72chevytrucks.com/vboard/f...play.php?f=239
Those folks are very well equipped to answer C50 questions.
I also have a ‘64 C10 and a ‘63 C50 so I jump from forum to forum.
A photo of the firewall would help and also what engine and trans it has. My ‘63 C50 has a separate Master Cylinder and clutch but I have seen the combined MC and Clutch on ‘62 and earlier.
Here is how mine is, stock setup, the combo system will have 2 metal lines from the bottom of the MC
I am definitely going to have to dig into that forum! Think I have it figured out as far as the brake/clutch system goes. Have 3 different trucks I am looking at right now, we will see what happens, still need to get my 80 sold first before going and grabbing one.
__________________
"He used to be a pretty nice feller, now he's a welder!"
MrBeast is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:03 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com