Fuse panel - new labels

[Toro]

Has anyone made new labels for their fuse panel? The original factory labels have faded/worn off on a majority of mine. It looks like the originals were painted on silkscreened on. It's very narrow on the edges, and I'm not sure what labels would even fit. Better solution would probably be one big label/sticker that included fuse cut-outs that could go over the entire face. Thanks for any input.

[71CHEVYSHORTBED402]

Originally Posted by Toro

Has anyone made new labels for their fuse panel? The original factory labels have faded/worn off on a majority of mine. It looks like the originals were painted on silkscreened on. It's very narrow on the edges, and I'm not sure what labels would even fit. Better solution would probably be one big label/sticker that included fuse cut-outs that could go over the entire face. Thanks for any input.

Shame those made for a new harness aren't available, but I haven't done the research. Option to do that with labels and a printer. Or that big label. Or leave it alone Can always put an illustration in plastic sheet, keep it in the glove box.

https://www.loadzalabels.com/products/black-stickers

[LS short box]

Take pic of the fuse block and take it to a local graphic shop and see if they can help. If they can make you new labels have them do a 1/2 dozen sets. Use one set for your project and then sell the others to folks that are in the same boat as you are with a bit of a mark up.