47-55.1 Canadian GMC rad support - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Klorne · 01-24-2024, 07:54 PM

So I have a 1950 Canadian GMC 100. The Canadian trucks came with the Chev 216. Apparently the GMC 228 or 248 could be ordered as an option. Mine came with a 216 but has a later model 235 in it now. I'm looking at my rad support and it has a bend to it at the bottom, guessing about 3/4". Looks factory to me, not like it was beaten into that shape. Also, it is the same style as a Chevrolet, not like the US GMC. (other than that bend) Does anyone know if the Canadian GMC's had different rad supports than the US models? All the holes line up with the fenders and the crossmember. Anyone know anything about these GMC's, and if this is normal?

**mr48chev** · 01-26-2024, 02:19 PM

Can you show us some more photos of it? the US GMC radiator support has a similar bend in it but the holes on the sides line up with the bolt holes in the inner fenders.

Klorne · 01-26-2024, 07:06 PM

Mr48chev, that's interesting, and thanks for the reply. Mine is more the shape of a Chevrolet, not as sharp of an angle on the bottom like the usual GMC's. I'll try to get some more pictures over the weekend. There's not much info about the Canadian trucks, I was hoping i would get some replies from some other Canucks that have worked on these things.

dsraven · 01-26-2024, 08:01 PM

my 57 Canadian GMC has a Chevy style rad support, not the normal GMC one.

leegreen · 01-26-2024, 08:07 PM

both my Canadian '52 and '53 chevrolet 1/2 tons had the 'normal' chevy style, Rad cap on top of tank, sides of support straight, not bent as shown above.

I know this does not answer your question, just adding to the body of knowledge

only picture I have, from '53 parts truck I sold. The one in my '52 has been cut up to tip the bottom of rad forward so it is no help:
Name: 53coresupp.jpg
Views: 114
Size: 32.6 KB

Name: 53coresupp.jpg
Views: 114
Size: 32.6 KB

01-24-2024, 07:54 PM	#1
Klorne Registered User Join Date: Sep 2017 Location: Sechelt, BC, Canada Posts: 13	Canadian GMC rad support So I have a 1950 Canadian GMC 100. The Canadian trucks came with the Chev 216. Apparently the GMC 228 or 248 could be ordered as an option. Mine came with a 216 but has a later model 235 in it now. I'm looking at my rad support and it has a bend to it at the bottom, guessing about 3/4". Looks factory to me, not like it was beaten into that shape. Also, it is the same style as a Chevrolet, not like the US GMC. (other than that bend) Does anyone know if the Canadian GMC's had different rad supports than the US models? All the holes line up with the fenders and the crossmember. Anyone know anything about these GMC's, and if this is normal? Attached Images Last edited by Rickysnickers; 01-25-2024 at 10:31 AM.

01-26-2024, 02:19 PM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,709	Re: Canadian GMC rad support Can you show us some more photos of it? the US GMC radiator support has a similar bend in it but the holes on the sides line up with the bolt holes in the inner fenders. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

01-26-2024, 07:06 PM	#3
Klorne Registered User Join Date: Sep 2017 Location: Sechelt, BC, Canada Posts: 13	Re: Canadian GMC rad support Mr48chev, that's interesting, and thanks for the reply. Mine is more the shape of a Chevrolet, not as sharp of an angle on the bottom like the usual GMC's. I'll try to get some more pictures over the weekend. There's not much info about the Canadian trucks, I was hoping i would get some replies from some other Canucks that have worked on these things.

01-26-2024, 08:01 PM	#4
dsraven Registered User Join Date: Nov 2010 Location: calgary alberta Posts: 8,333	Re: Canadian GMC rad support my 57 Canadian GMC has a Chevy style rad support, not the normal GMC one.

01-26-2024, 08:07 PM	#5
leegreen Registered User Join Date: Mar 2022 Location: Surrey BC Posts: 916	Re: Canadian GMC rad support both my Canadian '52 and '53 chevrolet 1/2 tons had the 'normal' chevy style, Rad cap on top of tank, sides of support straight, not bent as shown above. I know this does not answer your question, just adding to the body of knowledge only picture I have, from '53 parts truck I sold. The one in my '52 has been cut up to tip the bottom of rad forward so it is no help:



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.