Changing Driven Gear - The 1947 - Present Chevrolet & GMC Truck Message Board Network

skokie · 09-02-2004, 07:43 PM

How do you change out a driven gear for a 400 turbo?

Thanks

Tx Firefighter · 09-02-2004, 08:05 PM

Unscrew the speedo cable off the trans. Next, you remove the one bolt that holds the gear housing in and pull the housing. The driven gear just slides into the housing after you revove it.

I attached a picture of my turbo 400 so you can see the housing and bolt that holds it in.

Tx Firefighter · 09-02-2004, 08:06 PM

PS Brad, you have UPS package on the way.

skokie · 09-02-2004, 08:20 PM

Thanks Tx Firefighter. Isnt there another gear in there as well that may need to be swapped out?

09-02-2004, 07:43 PM	#1
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,354	Changing Driven Gear How do you change out a driven gear for a 400 turbo? Thanks

09-02-2004, 08:05 PM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Unscrew the speedo cable off the trans. Next, you remove the one bolt that holds the gear housing in and pull the housing. The driven gear just slides into the housing after you revove it. I attached a picture of my turbo 400 so you can see the housing and bolt that holds it in. Attached Images __________________ I'm on the Instagram- @Gearhead_Kevin

09-02-2004, 08:06 PM	#3
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	PS Brad, you have UPS package on the way.

09-02-2004, 08:20 PM	#4
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,354	Thanks Tx Firefighter. Isnt there another gear in there as well that may need to be swapped out?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.