Fs: '70 Cst 10 Lwb (dfw) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67_SS396 · 08-24-2004, 01:23 AM

The Nugget is back on the auction block. I've found another driver/project that I want and the truck has to go. There is not a lick of cancer in the truck, the rockers, cab corners, etc... are in excelent condition. The pass. rear fender is buckled, but can be straightened with ease. The entire suspension has been rebuilt, rebuilt TH-350, rebuilt top end of the 350. This is a factory A/C truck which has been converted to 134. Power brakes and power steering. I recently installed a set of buckets with center seat/console from a '00 Chevy truck. The dash is cut for a CD player (player does not stay with the truck). I installed a factory slider which was also tinted at the same time and does not leak. I will throw in the solid rear glass if the buyer wishes. I drive this on a daily basis and would drive it anywhere. I put an average of 200+ miles a day on this thing. It has all new belts, hoses, wires, plugs, battery cables, etc... I've made a handfull of trips to Missouri both empty and with a load and would go again tomorrow if need be. Without a load, I average 16-17 mpg on the highway with a mixture of city/hwy of 15 mpg. With a little more tuning, I'm sure 18-20 mpg could be a reality. Once the rain subsides for more than a day, I will clean it up and get some more recent pics. I'll be happy to answer any questions you may have. She is priced at $3950 obo.

Thanks,
Ryan

67_SS396 · 08-25-2004, 12:59 AM

TTT

This would make someone a great driver/cruiser.

67_SS396 · 08-26-2004, 01:06 PM

TTT

She's still available and will be going in the Autotrader next week.

67_SS396 · 08-27-2004, 03:24 PM

TTT again.

67_SS396 · 08-28-2004, 03:58 AM

6camaro9 · 08-28-2004, 11:47 AM

nice looking truck. got any more pics? i.e. engine, bed, interior.

how much of the top end of the engine did get rebuilt?

how good would it do in towing?
i need to pull a trailer/car.

i'm really looking for a dark green '72 cheyenne but i consider
anything.

thanks,
thomas...

67_SS396 · 08-28-2004, 02:09 PM

I'll be taking some more pics this weekend and get them up.

When I did the top end I rebuilt the heads, new SS valves, seats, seals and had the bowls cleaned up to unshroud the valves. New timing chain, cam, lifters, intake and carb. The intake is a polished performer clone with an Edelbrock 600. I also replaced all the internals of the distributor. The cylinder walls still had a good cross hatch, so I didn't go any further into it.

I use the truck to pull my bass boat and I wouldn't be affraid to pull a car trailer with it.

6camaro9 · 08-29-2004, 09:08 PM

today was a nice day...

thanks,
thomas...

67_SS396 · 08-30-2004, 12:27 AM

Our club's Driveway Session took alot longer than expected, so I wasn't able to get new pics taken today. I should be able to get it taken care of tomorrow afternoon and have them posted by night fall on Monday though.

67_SS396 · 09-07-2004, 02:25 PM

I finally have new and updated pics available. I'll post a couple here, but you can go to my PT page and see the rest. http://www.picturetrail.com/gallery/...430&uid=624330

Sorry it took so long, but our internet and phone was out for almost a week and then my wife had surgery, so I've been a little pre-occupied.

**Joesjunk** · 09-07-2004, 04:05 PM

Interesting two-tone, is it factory???

67_SS396 · 09-07-2004, 04:37 PM

Yes, it's factory. It's listed on the option sheet as Dark Gold body with Light Gold cab.

67_SS396 · 09-09-2004, 12:10 AM

The tires are near new with probably 40K miles life left. New ignition switch, wires, solenoid, plugs and plug wires. She runs like a top and drives like a dream. Right after I bought it, I installed a front sway bar for much better handling. I have a few misc. parts to throw in for future use, I even still have the original jack and rods.

67_SS396 · 09-10-2004, 08:13 PM

Ttt

bad_turbo · 09-11-2004, 02:06 PM

Beautiful truck! Wish I had the money to take it off your hands! Why are you selling it?

67_SS396 · 09-12-2004, 07:51 PM

I need to get rid of the truck so I can pick up another project/driver. There is an '84 Z28 waiting in the wings for when the truck goes to a new home. Tell me a bit about that '66 Wagon. I really like those Chevy II's and am enjoying the heck out of my '63 SS.

bad_turbo · 09-12-2004, 09:10 PM

My nova wagon needs a full restoration. It runs and drives and is currently my daily driver, but it needs the floorpans replaced, interior needs to be completely redone, needs minor body work and paint. Its not nearly as nice as your truck.

67_SS396 · 09-14-2004, 09:50 AM

For anyone going to the Arlington swap meet this weekend, I'll have the truck there for you to inspect in person. I'll be there willing to answer any questions you may have. I'll get our space information out and get it posted asap.

67_SS396 · 09-17-2004, 07:39 PM

The truck can be seen at the swap meet at the Ballpark this weekend. We will be located in lot B, Row 10 spaces 317-323. We back up to Nolan Ryan. There's been alot of interest lately, so I'm fairly certain it will go this weekend. (knock on wood)

If you don't come to look at the truck, just come by to say hi and have a brew.

Chevy Muscle · 09-18-2004, 06:25 PM

TTT for a great truck that i've ridden in and can atest to the great condition (not a bit of rust

)

If I didn't already have 5 cars, this would be in my driveway.

67_SS396 · 09-19-2004, 02:17 AM

Thanks Justin!

Well, either I have it priced to high, or no one wants a no rust driver/cruiser that will last them for years to come.

It's funny, I bet that if I yanked the engine/tranny, beat the hell out of the body, filled it full of rust and priced it at $2500, it would probably sell.

From what I gathered this weekend, not many people at the swaps are looking for a reliable driver, go figure.....

67_SS396 · 09-19-2004, 04:15 PM

I even got what I wanted for it.

So now I'm '67-72less for a while to come.

08-24-2004, 01:23 AM	#1
67_SS396 Registered User Join Date: Mar 2000 Location: Blue Ridge, Tx Posts: 1,172	Fs: '70 Cst 10 Lwb (dfw) The Nugget is back on the auction block. I've found another driver/project that I want and the truck has to go. There is not a lick of cancer in the truck, the rockers, cab corners, etc... are in excelent condition. The pass. rear fender is buckled, but can be straightened with ease. The entire suspension has been rebuilt, rebuilt TH-350, rebuilt top end of the 350. This is a factory A/C truck which has been converted to 134. Power brakes and power steering. I recently installed a set of buckets with center seat/console from a '00 Chevy truck. The dash is cut for a CD player (player does not stay with the truck). I installed a factory slider which was also tinted at the same time and does not leak. I will throw in the solid rear glass if the buyer wishes. I drive this on a daily basis and would drive it anywhere. I put an average of 200+ miles a day on this thing. It has all new belts, hoses, wires, plugs, battery cables, etc... I've made a handfull of trips to Missouri both empty and with a load and would go again tomorrow if need be. Without a load, I average 16-17 mpg on the highway with a mixture of city/hwy of 15 mpg. With a little more tuning, I'm sure 18-20 mpg could be a reality. Once the rain subsides for more than a day, I will clean it up and get some more recent pics. I'll be happy to answer any questions you may have. She is priced at $3950 obo. Thanks, Ryan __________________ Fawker Fab three seater rock crawler buggy 498 BBC/SM465/203/205 doubler, propane, 5.13's, 42" PB Rockers '66 C10 - The new hot rod '77 3+3 Dually - 12 valve 4wd conversion tow rig project '28 Ford 2 door sedan street rod RevLimit Offroad "Hang on beer, we can do this."

08-25-2004, 12:59 AM	#2
67_SS396 Registered User Join Date: Mar 2000 Location: Blue Ridge, Tx Posts: 1,172	TTT This would make someone a great driver/cruiser. __________________ Fawker Fab three seater rock crawler buggy 498 BBC/SM465/203/205 doubler, propane, 5.13's, 42" PB Rockers '66 C10 - The new hot rod '77 3+3 Dually - 12 valve 4wd conversion tow rig project '28 Ford 2 door sedan street rod RevLimit Offroad "Hang on beer, we can do this."

08-26-2004, 01:06 PM	#3
67_SS396 Registered User Join Date: Mar 2000 Location: Blue Ridge, Tx Posts: 1,172	TTT She's still available and will be going in the Autotrader next week. __________________ Fawker Fab three seater rock crawler buggy 498 BBC/SM465/203/205 doubler, propane, 5.13's, 42" PB Rockers '66 C10 - The new hot rod '77 3+3 Dually - 12 valve 4wd conversion tow rig project '28 Ford 2 door sedan street rod RevLimit Offroad "Hang on beer, we can do this."

08-27-2004, 03:24 PM	#4
67_SS396 Registered User Join Date: Mar 2000 Location: Blue Ridge, Tx Posts: 1,172	TTT again. __________________ Fawker Fab three seater rock crawler buggy 498 BBC/SM465/203/205 doubler, propane, 5.13's, 42" PB Rockers '66 C10 - The new hot rod '77 3+3 Dually - 12 valve 4wd conversion tow rig project '28 Ford 2 door sedan street rod RevLimit Offroad "Hang on beer, we can do this."

08-28-2004, 03:58 AM	#5
67_SS396 Registered User Join Date: Mar 2000 Location: Blue Ridge, Tx Posts: 1,172	__________________ Fawker Fab three seater rock crawler buggy 498 BBC/SM465/203/205 doubler, propane, 5.13's, 42" PB Rockers '66 C10 - The new hot rod '77 3+3 Dually - 12 valve 4wd conversion tow rig project '28 Ford 2 door sedan street rod RevLimit Offroad "Hang on beer, we can do this." Last edited by 67_SS396; 08-28-2004 at 02:09 PM.

08-28-2004, 11:47 AM	#6
6camaro9 Registered User Join Date: Jun 2004 Location: Moving, TX Posts: 35	nice looking truck. got any more pics? i.e. engine, bed, interior. how much of the top end of the engine did get rebuilt? how good would it do in towing? i need to pull a trailer/car. i'm really looking for a dark green '72 cheyenne but i consider anything. thanks, thomas...

08-28-2004, 02:09 PM	#7
67_SS396 Registered User Join Date: Mar 2000 Location: Blue Ridge, Tx Posts: 1,172	I'll be taking some more pics this weekend and get them up. When I did the top end I rebuilt the heads, new SS valves, seats, seals and had the bowls cleaned up to unshroud the valves. New timing chain, cam, lifters, intake and carb. The intake is a polished performer clone with an Edelbrock 600. I also replaced all the internals of the distributor. The cylinder walls still had a good cross hatch, so I didn't go any further into it. I use the truck to pull my bass boat and I wouldn't be affraid to pull a car trailer with it. __________________ Fawker Fab three seater rock crawler buggy 498 BBC/SM465/203/205 doubler, propane, 5.13's, 42" PB Rockers '66 C10 - The new hot rod '77 3+3 Dually - 12 valve 4wd conversion tow rig project '28 Ford 2 door sedan street rod RevLimit Offroad "Hang on beer, we can do this."

08-29-2004, 09:08 PM	#8
6camaro9 Registered User Join Date: Jun 2004 Location: Moving, TX Posts: 35	today was a nice day... thanks, thomas...

08-30-2004, 12:27 AM	#9
67_SS396 Registered User Join Date: Mar 2000 Location: Blue Ridge, Tx Posts: 1,172	Our club's Driveway Session took alot longer than expected, so I wasn't able to get new pics taken today. I should be able to get it taken care of tomorrow afternoon and have them posted by night fall on Monday though. __________________ Fawker Fab three seater rock crawler buggy 498 BBC/SM465/203/205 doubler, propane, 5.13's, 42" PB Rockers '66 C10 - The new hot rod '77 3+3 Dually - 12 valve 4wd conversion tow rig project '28 Ford 2 door sedan street rod RevLimit Offroad "Hang on beer, we can do this."

09-07-2004, 02:25 PM	#10
67_SS396 Registered User Join Date: Mar 2000 Location: Blue Ridge, Tx Posts: 1,172	I finally have new and updated pics available. I'll post a couple here, but you can go to my PT page and see the rest. http://www.picturetrail.com/gallery/...430&uid=624330 Sorry it took so long, but our internet and phone was out for almost a week and then my wife had surgery, so I've been a little pre-occupied. __________________ Fawker Fab three seater rock crawler buggy 498 BBC/SM465/203/205 doubler, propane, 5.13's, 42" PB Rockers '66 C10 - The new hot rod '77 3+3 Dually - 12 valve 4wd conversion tow rig project '28 Ford 2 door sedan street rod RevLimit Offroad "Hang on beer, we can do this."

09-07-2004, 04:05 PM	#11
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,710	Interesting two-tone, is it factory??? __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

09-07-2004, 04:37 PM	#12
67_SS396 Registered User Join Date: Mar 2000 Location: Blue Ridge, Tx Posts: 1,172	Yes, it's factory. It's listed on the option sheet as Dark Gold body with Light Gold cab. __________________ Fawker Fab three seater rock crawler buggy 498 BBC/SM465/203/205 doubler, propane, 5.13's, 42" PB Rockers '66 C10 - The new hot rod '77 3+3 Dually - 12 valve 4wd conversion tow rig project '28 Ford 2 door sedan street rod RevLimit Offroad "Hang on beer, we can do this."

09-09-2004, 12:10 AM	#13
67_SS396 Registered User Join Date: Mar 2000 Location: Blue Ridge, Tx Posts: 1,172	The tires are near new with probably 40K miles life left. New ignition switch, wires, solenoid, plugs and plug wires. She runs like a top and drives like a dream. Right after I bought it, I installed a front sway bar for much better handling. I have a few misc. parts to throw in for future use, I even still have the original jack and rods. __________________ Fawker Fab three seater rock crawler buggy 498 BBC/SM465/203/205 doubler, propane, 5.13's, 42" PB Rockers '66 C10 - The new hot rod '77 3+3 Dually - 12 valve 4wd conversion tow rig project '28 Ford 2 door sedan street rod RevLimit Offroad "Hang on beer, we can do this."

09-10-2004, 08:13 PM	#14
67_SS396 Registered User Join Date: Mar 2000 Location: Blue Ridge, Tx Posts: 1,172	Ttt __________________ Fawker Fab three seater rock crawler buggy 498 BBC/SM465/203/205 doubler, propane, 5.13's, 42" PB Rockers '66 C10 - The new hot rod '77 3+3 Dually - 12 valve 4wd conversion tow rig project '28 Ford 2 door sedan street rod RevLimit Offroad "Hang on beer, we can do this."

09-11-2004, 02:06 PM	#15
bad_turbo turbo enthusiast Join Date: Jan 2004 Location: carmichael, ca. Posts: 1,826	Beautiful truck! Wish I had the money to take it off your hands! Why are you selling it? __________________ "But daddy, I didn't hit them all with a stick"...what my 6 year old tells me when I pick him up from school early for fighting "



Register or Log In To remove these advertisements.

09-12-2004, 07:51 PM	#16
67_SS396 Registered User Join Date: Mar 2000 Location: Blue Ridge, Tx Posts: 1,172	I need to get rid of the truck so I can pick up another project/driver. There is an '84 Z28 waiting in the wings for when the truck goes to a new home. Tell me a bit about that '66 Wagon. I really like those Chevy II's and am enjoying the heck out of my '63 SS. __________________ Fawker Fab three seater rock crawler buggy 498 BBC/SM465/203/205 doubler, propane, 5.13's, 42" PB Rockers '66 C10 - The new hot rod '77 3+3 Dually - 12 valve 4wd conversion tow rig project '28 Ford 2 door sedan street rod RevLimit Offroad "Hang on beer, we can do this."

09-12-2004, 09:10 PM	#17
bad_turbo turbo enthusiast Join Date: Jan 2004 Location: carmichael, ca. Posts: 1,826	My nova wagon needs a full restoration. It runs and drives and is currently my daily driver, but it needs the floorpans replaced, interior needs to be completely redone, needs minor body work and paint. Its not nearly as nice as your truck. __________________ "But daddy, I didn't hit them all with a stick"...what my 6 year old tells me when I pick him up from school early for fighting "

09-14-2004, 09:50 AM	#18
67_SS396 Registered User Join Date: Mar 2000 Location: Blue Ridge, Tx Posts: 1,172	For anyone going to the Arlington swap meet this weekend, I'll have the truck there for you to inspect in person. I'll be there willing to answer any questions you may have. I'll get our space information out and get it posted asap. __________________ Fawker Fab three seater rock crawler buggy 498 BBC/SM465/203/205 doubler, propane, 5.13's, 42" PB Rockers '66 C10 - The new hot rod '77 3+3 Dually - 12 valve 4wd conversion tow rig project '28 Ford 2 door sedan street rod RevLimit Offroad "Hang on beer, we can do this."

09-17-2004, 07:39 PM	#19
67_SS396 Registered User Join Date: Mar 2000 Location: Blue Ridge, Tx Posts: 1,172	The truck can be seen at the swap meet at the Ballpark this weekend. We will be located in lot B, Row 10 spaces 317-323. We back up to Nolan Ryan. There's been alot of interest lately, so I'm fairly certain it will go this weekend. (knock on wood) If you don't come to look at the truck, just come by to say hi and have a brew. __________________ Fawker Fab three seater rock crawler buggy 498 BBC/SM465/203/205 doubler, propane, 5.13's, 42" PB Rockers '66 C10 - The new hot rod '77 3+3 Dually - 12 valve 4wd conversion tow rig project '28 Ford 2 door sedan street rod RevLimit Offroad "Hang on beer, we can do this." Last edited by 67_SS396; 09-17-2004 at 07:43 PM.

09-18-2004, 06:25 PM	#20
Chevy Muscle < 69 Blazer Join Date: Mar 2004 Location: Nevada, TX Posts: 292	TTT for a great truck that i've ridden in and can atest to the great condition (not a bit of rust ) If I didn't already have 5 cars, this would be in my driveway.

09-19-2004, 02:17 AM	#21
67_SS396 Registered User Join Date: Mar 2000 Location: Blue Ridge, Tx Posts: 1,172	Thanks Justin! Well, either I have it priced to high, or no one wants a no rust driver/cruiser that will last them for years to come. It's funny, I bet that if I yanked the engine/tranny, beat the hell out of the body, filled it full of rust and priced it at $2500, it would probably sell. From what I gathered this weekend, not many people at the swaps are looking for a reliable driver, go figure..... __________________ Fawker Fab three seater rock crawler buggy 498 BBC/SM465/203/205 doubler, propane, 5.13's, 42" PB Rockers '66 C10 - The new hot rod '77 3+3 Dually - 12 valve 4wd conversion tow rig project '28 Ford 2 door sedan street rod RevLimit Offroad "Hang on beer, we can do this."

09-19-2004, 04:15 PM	#22
67_SS396 Registered User Join Date: Mar 2000 Location: Blue Ridge, Tx Posts: 1,172	Sold!!! I even got what I wanted for it. So now I'm '67-72less for a while to come. __________________ Fawker Fab three seater rock crawler buggy 498 BBC/SM465/203/205 doubler, propane, 5.13's, 42" PB Rockers '66 C10 - The new hot rod '77 3+3 Dually - 12 valve 4wd conversion tow rig project '28 Ford 2 door sedan street rod RevLimit Offroad "Hang on beer, we can do this."

Register or Log In To remove these advertisements.