The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-24-2004, 09:43 PM   #1
cliffsta
Stepsides RULE
 
cliffsta's Avatar
 
Join Date: Jul 2004
Location: Pineville, LA
Posts: 1,921
Egr

Well, what is it? If i disconnect it and plug the hole, will performance and MPG suffer or improve? If i shouldn't disconnect it for performance, should i take it out and clean it or replace it?
__________________
1981 Chevy C10 Custom Deluxe Stepside 350 V8, headers, side exhausts, 3-speed auto SOLD
1980 Chevy C10 Custum Deluxe Stepside 305 V8, Edelbrock Performer Intake, Edelbrock 1406 600CFM 4-barrel, TH350C. Bent rod. SOLD
1984 GMC Sierra Classic Longbed 6.2L Diesel SOLD
2009 Kawasaki KLX-250S too many mods for this signature
1999 Honda Accord EX 4-cylinder, 17" Motegi Wheels 215/45/17 Sumitomo tires, Tein S-Tech lowering springs, KYB GR2 shocks, Acura TL 20mm rear swaybar, debadged, blackhoused headlights, Short-Ram Intake
Cardomain of the Accord
cliffsta is offline   Reply With Quote
Old 10-25-2004, 10:54 AM   #2
Prerunner1982
Registered User
 
Prerunner1982's Avatar
 
Join Date: Oct 2002
Location: Edmond, OK
Posts: 5,904
if you dont have emissions testing you can put a block off plate on it and be good. but if you have testing, replace it if you think its causing you problems.
Prerunner1982 is offline   Reply With Quote
Old 10-25-2004, 02:40 PM   #3
PHOENIX
Registered User
 
Join Date: Oct 2002
Location: Phoenix, Arizona
Posts: 4,703
Is the EGR giving you problems now?
If you disconntect the egr you may suffer some performance at higher rpms.
The egr helps cut down on pinging.
I have a brand new EGR and I dont know whats wrong with my setup but it causes the engine to stumble off idle. Most of the time I have the line off and plugged, but I have been trying to get it fixed and right.
__________________
* AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *
PHOENIX is offline   Reply With Quote
Old 10-25-2004, 04:24 PM   #4
cliffsta
Stepsides RULE
 
cliffsta's Avatar
 
Join Date: Jul 2004
Location: Pineville, LA
Posts: 1,921
I don't think its messed up, i was just curious if it gets clogged or could need replacing after 24 years. Last night i was making out a list of NEEDS for birthday and xmas, and was curious what all emissions stuff my dad eliminated. Now that its light outside, im gonna go look for it. he said he eliminated all the emissions stuff he could figure out. i was just curious as to what it is.
so
WHAT DOES IT DO?
__________________
1981 Chevy C10 Custom Deluxe Stepside 350 V8, headers, side exhausts, 3-speed auto SOLD
1980 Chevy C10 Custum Deluxe Stepside 305 V8, Edelbrock Performer Intake, Edelbrock 1406 600CFM 4-barrel, TH350C. Bent rod. SOLD
1984 GMC Sierra Classic Longbed 6.2L Diesel SOLD
2009 Kawasaki KLX-250S too many mods for this signature
1999 Honda Accord EX 4-cylinder, 17" Motegi Wheels 215/45/17 Sumitomo tires, Tein S-Tech lowering springs, KYB GR2 shocks, Acura TL 20mm rear swaybar, debadged, blackhoused headlights, Short-Ram Intake
Cardomain of the Accord
cliffsta is offline   Reply With Quote
Old 10-25-2004, 05:05 PM   #5
Jonboy
Slots go on anything!
 
Join Date: May 2003
Location: Richardson, TX
Posts: 5,957
EGR stands for Exhaust Gas Recirculation. It allows exhaust to be reburned, thereby reducing emissions. The best way to check the operation of the valve is to put your fingers under it at idle, and gently raise the valve. If the vehicle stumbles, it is working. Likewise, if you cannot get the valve to move, it will need to be replaced.
__________________
1974 Jimmy- 5.3/4L80e/NP241
Jonboy is offline   Reply With Quote
Old 10-25-2004, 06:49 PM   #6
cliffsta
Stepsides RULE
 
cliffsta's Avatar
 
Join Date: Jul 2004
Location: Pineville, LA
Posts: 1,921
ahh, sounds like its gonna stay on there
__________________
1981 Chevy C10 Custom Deluxe Stepside 350 V8, headers, side exhausts, 3-speed auto SOLD
1980 Chevy C10 Custum Deluxe Stepside 305 V8, Edelbrock Performer Intake, Edelbrock 1406 600CFM 4-barrel, TH350C. Bent rod. SOLD
1984 GMC Sierra Classic Longbed 6.2L Diesel SOLD
2009 Kawasaki KLX-250S too many mods for this signature
1999 Honda Accord EX 4-cylinder, 17" Motegi Wheels 215/45/17 Sumitomo tires, Tein S-Tech lowering springs, KYB GR2 shocks, Acura TL 20mm rear swaybar, debadged, blackhoused headlights, Short-Ram Intake
Cardomain of the Accord
cliffsta is offline   Reply With Quote
Old 10-25-2004, 06:58 PM   #7
C&C Chevy
Registered User
 
C&C Chevy's Avatar
 
Join Date: Feb 2003
Location: Midwest City, OK
Posts: 1,001
From what I understand it's better to replace it rather than cleaning it..
__________________
Robert

Current:
1986 SWB Silverado 4.3 / TH400

Past:
1985 SWB Silverado 305 / TH350 - sold 1995
1987 1/2 ton Silverado - FI 350 / 700R4 sold 2007
C&C Chevy is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:08 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com