Rav's 1979 C10 LWB Street Rod - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

raveer2000 · 01-16-2010, 10:58 AM

Quote:

Originally Posted by VA72C10

Looks good. What type of paint (enamel or BC/CC) and what color?

Its torredor red and its PPG shopline BC/CC. Those pics were just with the base on it. I will some more with the clear on it.

raveer2000 · 01-16-2010, 05:08 PM

Few more pics of the motor. Clear Coat is done and we started getting the pan and covers on it. Heads are on the bench getting the springs changed and will be on next week. Had to get a different 4 link for the truck so the suspension is on hold until we get the correct parts. Also took a few pics of the intake we are gonna run

raveer2000 · 01-16-2010, 05:13 PM

TUNNEL RAM

menace121978 · 01-17-2010, 09:12 AM

awesome build! subscribing...

raveer2000 · 01-29-2010, 07:41 PM

Just a quick update. Got the motor 90% done and the engine compartment is close to being ready for primer and paint. All of the suspension components should be in on Monday so we can start the 4 link. We made 1 change and decided to buy all tubular A-arms for the front end.

tvblazer78 · 01-29-2010, 09:37 PM

Nice job! The motor looks sweet! What kind of power are you thinking?

raveer2000 · 01-30-2010, 01:12 PM

Quote:

Originally Posted by tvblazer78

Nice job! The motor looks sweet! What kind of power are you thinking?

Well the comp cams software says 598HP but I am thinking just a hair over 500HP. I could be wrong, but we are planning a trip to a chassis dyno for final tuning and some results.

tvblazer78 · 01-30-2010, 07:39 PM

Sounds sweet! You better take some clips of that!

raveer2000 · 02-02-2010, 10:13 PM

Here are a few pics of the 4 link and tubular upper and lower A-arms being installed

tvblazer78 · 02-03-2010, 11:31 AM

I have only seen pics before, but did you flip your 4 link? it looks like the left one should be on th right side?

aggie91 · 02-03-2010, 06:55 PM

Quote:

Originally Posted by tvblazer78

I have only seen pics before, but did you flip your 4 link? it looks like the left one should be on th right side?

Yea, it looks like they should be swapped to me too....

Where did you get the air bags, air management and the other parts from?

raveer2000 · 02-03-2010, 10:15 PM

We intentionally installed the 4 link on top of the axle. The installation says it can be done either way. Most are done with the brackets underneath the axle. We were not looking for a scraper just a functional 4 link for the power we are planning. The parts are all from Airbagit. (AIM) Not my choice, but have to use what the student bought. So far so good with their products. But we will have to see how long they hold up.

Driveway Dreams · 02-03-2010, 11:59 PM

The truck looks to be coming along very well. That motor looks awesome. And heck, 500 horse...I wouldn't mind half of that right now.

raveer2000 · 02-04-2010, 06:37 PM

Got a few more pics today. finished welding the rear brackets on, finished the drivers side suspension. We couldn't resist the chance to put on the new wheels and tires and sit the truck down on them. So we posed it up a little. The students have all gone crazy and now really want to finish this project because they love the look of this truck. After the pics we ut it back on the lift, blew it all apart, finished grinding everything and painted the frame all black. Tomorrow we spray the firewall.

VA72C10 · 02-04-2010, 06:41 PM

looking good!!!

raveer2000 · 02-09-2010, 07:54 PM

Well we got the firewall painted and the frame painted. Next is getting all the suspension in. Will have another update soon.

dbmx66 · 02-09-2010, 08:27 PM

holy sexyness!

fpjr0 · 02-09-2010, 08:59 PM

I wish we had a shop like that when I went to school

raveer2000 · 02-12-2010, 02:20 PM

Okay a quick update. We got the panhard bar fabbed up now that the bed is on. Also have all the bags installed and are working on all the air lines. We have also installed the fuel cell and started plumbing the fuel system. AN lines can be a pain but they sure are nice after they are made.

PANHARD BAR

FUEL SYSTEM

raveer2000 · 02-16-2010, 08:15 PM

Well we are out of school all week because of Mardi Gras, but I did go up to the shop and get my new powder coat machine unpacked and tried it out. I did one of the front spindles. I think it turned out great for my first time.

raveer2000 · 02-24-2010, 06:37 PM

Okay well we are finally getting somewhere. All of the suspension is done and plumbed. The fuel lines are all run, and the motor and trans is in. I got a powder coat machine and a small oven to do things like valve covers and stuff so after playing with it for a week we did the bug catcher, valve covers and the March front support piece in Candy Red powder. I think it turned out wonderful. What do ya think.

VA72C10 · 02-24-2010, 07:03 PM

looks great!

menace121978 · 02-24-2010, 08:03 PM

X2 very nice!

tvblazer78 · 02-24-2010, 08:32 PM

Very nice! You all are taking the time to make this a nice ride.

raveer2000 · 02-24-2010, 11:31 PM

Yep its hard to slow down a bunch of 15 and 16 year olds.. They like to rush and just get it done, but for the most part they are doing it all right. The kid is about to drop another $4500 in the next few days to buy all the finishing touches. Grill, roll pan, front bumper, Hydratech brake booster. All stainless AN lines on everything, lots of little things to get it all done. That will put the total to just over $25,000 in the last 3 months.

01-16-2010, 05:08 PM	#27
raveer2000 Registered User Join Date: Dec 2009 Location: South MS Posts: 90	Re: Rav's 1979 C10 LWB Street Rod Few more pics of the motor. Clear Coat is done and we started getting the pan and covers on it. Heads are on the bench getting the springs changed and will be on next week. Had to get a different 4 link for the truck so the suspension is on hold until we get the correct parts. Also took a few pics of the intake we are gonna run __________________ 1972 K5 CST. Work in progress. 408CI 1980 K10

01-16-2010, 05:13 PM	#28
raveer2000 Registered User Join Date: Dec 2009 Location: South MS Posts: 90	Re: Rav's 1979 C10 LWB Street Rod TUNNEL RAM __________________ 1972 K5 CST. Work in progress. 408CI 1980 K10

01-17-2010, 09:12 AM	#29
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Rav's 1979 C10 LWB Street Rod awesome build! subscribing... __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

01-29-2010, 07:41 PM	#30
raveer2000 Registered User Join Date: Dec 2009 Location: South MS Posts: 90	Re: Rav's 1979 C10 LWB Street Rod Just a quick update. Got the motor 90% done and the engine compartment is close to being ready for primer and paint. All of the suspension components should be in on Monday so we can start the 4 link. We made 1 change and decided to buy all tubular A-arms for the front end. __________________ 1972 K5 CST. Work in progress. 408CI 1980 K10

01-29-2010, 09:37 PM	#31
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: Rav's 1979 C10 LWB Street Rod Nice job! The motor looks sweet! What kind of power are you thinking? __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012

01-30-2010, 07:39 PM	#33
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: Rav's 1979 C10 LWB Street Rod Sounds sweet! You better take some clips of that! __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012

02-02-2010, 10:13 PM	#34
raveer2000 Registered User Join Date: Dec 2009 Location: South MS Posts: 90	Re: Rav's 1979 C10 LWB Street Rod Here are a few pics of the 4 link and tubular upper and lower A-arms being installed __________________ 1972 K5 CST. Work in progress. 408CI 1980 K10

02-03-2010, 11:31 AM	#35
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: Rav's 1979 C10 LWB Street Rod I have only seen pics before, but did you flip your 4 link? it looks like the left one should be on th right side? __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012

02-03-2010, 10:15 PM	#37
raveer2000 Registered User Join Date: Dec 2009 Location: South MS Posts: 90	Re: Rav's 1979 C10 LWB Street Rod We intentionally installed the 4 link on top of the axle. The installation says it can be done either way. Most are done with the brackets underneath the axle. We were not looking for a scraper just a functional 4 link for the power we are planning. The parts are all from Airbagit. (AIM) Not my choice, but have to use what the student bought. So far so good with their products. But we will have to see how long they hold up. __________________ 1972 K5 CST. Work in progress. 408CI 1980 K10

02-03-2010, 11:59 PM	#38
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: Rav's 1979 C10 LWB Street Rod The truck looks to be coming along very well. That motor looks awesome. And heck, 500 horse...I wouldn't mind half of that right now. __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

02-04-2010, 06:37 PM	#39
raveer2000 Registered User Join Date: Dec 2009 Location: South MS Posts: 90	Re: Rav's 1979 C10 LWB Street Rod Got a few more pics today. finished welding the rear brackets on, finished the drivers side suspension. We couldn't resist the chance to put on the new wheels and tires and sit the truck down on them. So we posed it up a little. The students have all gone crazy and now really want to finish this project because they love the look of this truck. After the pics we ut it back on the lift, blew it all apart, finished grinding everything and painted the frame all black. Tomorrow we spray the firewall. __________________ 1972 K5 CST. Work in progress. 408CI 1980 K10

02-04-2010, 06:41 PM	#40
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Rav's 1979 C10 LWB Street Rod looking good!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-09-2010, 07:54 PM	#41
raveer2000 Registered User Join Date: Dec 2009 Location: South MS Posts: 90	Re: Rav's 1979 C10 LWB Street Rod Well we got the firewall painted and the frame painted. Next is getting all the suspension in. Will have another update soon. __________________ 1972 K5 CST. Work in progress. 408CI 1980 K10

02-09-2010, 08:27 PM	#42
dbmx66 Registered User Join Date: Aug 2009 Location: PA Posts: 883	Re: Rav's 1979 C10 LWB Street Rod holy sexyness!

02-09-2010, 08:59 PM	#43
fpjr0 Registered User Join Date: Mar 2009 Location: san antonio tx Posts: 202	Re: Rav's 1979 C10 LWB Street Rod I wish we had a shop like that when I went to school Last edited by fpjr0; 02-09-2010 at 09:00 PM. Reason: f



Register or Log In To remove these advertisements.

02-12-2010, 02:20 PM	#44
raveer2000 Registered User Join Date: Dec 2009 Location: South MS Posts: 90	Re: Rav's 1979 C10 LWB Street Rod Okay a quick update. We got the panhard bar fabbed up now that the bed is on. Also have all the bags installed and are working on all the air lines. We have also installed the fuel cell and started plumbing the fuel system. AN lines can be a pain but they sure are nice after they are made. PANHARD BAR FUEL SYSTEM __________________ 1972 K5 CST. Work in progress. 408CI 1980 K10

02-16-2010, 08:15 PM	#45
raveer2000 Registered User Join Date: Dec 2009 Location: South MS Posts: 90	Re: Rav's 1979 C10 LWB Street Rod Well we are out of school all week because of Mardi Gras, but I did go up to the shop and get my new powder coat machine unpacked and tried it out. I did one of the front spindles. I think it turned out great for my first time. __________________ 1972 K5 CST. Work in progress. 408CI 1980 K10

02-24-2010, 06:37 PM	#46
raveer2000 Registered User Join Date: Dec 2009 Location: South MS Posts: 90	Re: Rav's 1979 C10 LWB Street Rod Okay well we are finally getting somewhere. All of the suspension is done and plumbed. The fuel lines are all run, and the motor and trans is in. I got a powder coat machine and a small oven to do things like valve covers and stuff so after playing with it for a week we did the bug catcher, valve covers and the March front support piece in Candy Red powder. I think it turned out wonderful. What do ya think. __________________ 1972 K5 CST. Work in progress. 408CI 1980 K10

02-24-2010, 07:03 PM	#47
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Rav's 1979 C10 LWB Street Rod looks great! __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-24-2010, 08:03 PM	#48
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Rav's 1979 C10 LWB Street Rod X2 very nice! __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

02-24-2010, 08:32 PM	#49
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: Rav's 1979 C10 LWB Street Rod Very nice! You all are taking the time to make this a nice ride. __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012

02-24-2010, 11:31 PM	#50
raveer2000 Registered User Join Date: Dec 2009 Location: South MS Posts: 90	Re: Rav's 1979 C10 LWB Street Rod Yep its hard to slow down a bunch of 15 and 16 year olds.. They like to rush and just get it done, but for the most part they are doing it all right. The kid is about to drop another $4500 in the next few days to buy all the finishing touches. Grill, roll pan, front bumper, Hydratech brake booster. All stainless AN lines on everything, lots of little things to get it all done. That will put the total to just over $25,000 in the last 3 months. __________________ 1972 K5 CST. Work in progress. 408CI 1980 K10

Register or Log In To remove these advertisements.