SC Cabs For Patches and A 67 Fender For Patches - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

indyracer · 09-06-2011, 03:39 PM

I was just looking over my post after you replied and I wanted to clarify what I wanted. I want the complete corner, door jamb and all. You may have already thought that, but I wanted to make sure because it does look like I was maybe talking about just the area around the window.

creepdogg · 09-06-2011, 03:42 PM

I can get you that piece cut out for $40 plus shipping.

How big of a piece do you think you will cut out? Should I send you another pic with some tape outlining exactly how big I would like?

Thanks

**wancosc356** · 09-06-2011, 06:01 PM

Quote:

Originally Posted by indyracer

I was just looking over my post after you replied and I wanted to clarify what I wanted. I want the complete corner, door jamb and all. You may have already thought that, but I wanted to make sure because it does look like I was maybe talking about just the area around the window.

Oh ok. I thought u did want just the area around the window. But I can do the complete corner too. $50 for both sound fair?

Quote:

Originally Posted by creepdogg

I can get you that piece cut out for $40 plus shipping.

How big of a piece do you think you will cut out? Should I send you another pic with some tape outlining exactly how big I would like?

Thanks

However big you want. You can do that or just get me some measurements.

**wancosc356** · 09-06-2011, 06:04 PM

OK....Everyone who wants patches cut. Shoot me a PM as soon as possible and let me know if you definitely will take the parts. I don't want to cut anything if anyone is going to change their mind or anything like that. Thanks.

**wancosc356** · 09-08-2011, 09:43 PM

Bump

68chevyboy · 09-08-2011, 10:30 PM

How much for the A/C section of the fire wall shipped to 65605, Thanks Brad.

**wancosc356** · 09-08-2011, 10:35 PM

Quote:

Originally Posted by 68chevyboy

How much for the A/C section of the fire wall shipped to 65605, Thanks Brad.

I'll have to double check that area tomorrow. I'll get better pics and let you know a rough estimate on shipping.

longhorn70gmc · 09-09-2011, 04:32 PM

Hello Michael,
I noticed an automatic SIGINAW steering box on the first Cab, does it leak? I also noticed the heater section of the blue cab, is it any good? I may be interested in both of these. Let me know?
R/

**wancosc356** · 09-09-2011, 05:30 PM

Quote:

Originally Posted by longhorn70gmc

Hello Michael,
I noticed an automatic SIGINAW steering box on the first Cab, does it leak? I also noticed the heater section of the blue cab, is it any good? I may be interested in both of these. Let me know?
R/

Sorry. I no longer have that power steering box or pump. I may have another...but Ill have to look. As for the heater section of the blue cab....are you talking about the box or the actual sheet metal of the firewall?

**wancosc356** · 09-09-2011, 08:07 PM

Quote:

Originally Posted by 68chevyboy

How much for the A/C section of the fire wall shipped to 65605, Thanks Brad.

The A/C section is pretty bad. Let me know if you can use any of it or not.

**wancosc356** · 09-09-2011, 08:08 PM

Quote:

Originally Posted by longhorn70gmc

Hello Michael,
I noticed an automatic SIGINAW steering box on the first Cab, does it leak? I also noticed the heater section of the blue cab, is it any good? I may be interested in both of these. Let me know?
R/

No luck on another power steering box. Sorry.

However, the heater section of the cab looks really good. Let me know what you think.

68chevyboy · 09-09-2011, 10:26 PM

Yeah I can use it, I need the part the condenser box attaches to

**wancosc356** · 09-09-2011, 10:45 PM

Quote:

Originally Posted by 68chevyboy

Yeah I can use it, I need the part the condenser box attaches to

Ok. So do u need just the front piece or do u need me to cut that whole section thru the cab?
Posted via Mobile Device

68chevyboy · 09-09-2011, 11:26 PM

just the front peice

**wancosc356** · 09-09-2011, 11:34 PM

Quote:

Originally Posted by 68chevyboy

just the front peice

Shoot me a pm and let me know exactly where to cut. And also ur zip code so I can get u a rough estimate on shipping.
Posted via Mobile Device

68chevyboy · 09-10-2011, 12:30 AM

PM sent

longhorn70gmc · 09-10-2011, 05:06 PM

Quote:

Originally Posted by wancosc356

Sorry. I no longer have that power steering box or pump. I may have another...but Ill have to look. As for the heater section of the blue cab....are you talking about the box or the actual sheet metal of the firewall?

Thanks for getting back to me. Copy on the avalability of the Steering box, I appreciate you checking for me. I am going to attempt to rebuild the one I have. I am interested in your heater box you removed. I have removed my A/C from my longhorn and want to install a heater set up instead. My cab is in really great shape, so I don't need the sheet metal behind the heater box. I 'll check back in later, have a great Saturday.
R/

**wancosc356** · 09-11-2011, 12:01 PM

Quote:

Originally Posted by longhorn70gmc

Thanks for getting back to me. Copy on the avalability of the Steering box, I appreciate you checking for me. I am going to attempt to rebuild the one I have. I am interested in your heater box you removed. I have removed my A/C from my longhorn and want to install a heater set up instead. My cab is in really great shape, so I don't need the sheet metal behind the heater box. I 'll check back in later, have a great Saturday.
R/

No problem. Oh ok. Yea. The heater box is in good shape on the inside. The blower motor actually looks fairly new. The only issue with the box is on the outside of it. Between the inlet and outlet holes for the heater core, there is a hole right in the middle of that area. About the size of a nickel or quarter. Not sure if that is an easy fix or not. Let me know if you want a better pic.

longhorn70gmc · 09-14-2011, 07:27 PM

Quote:

Originally Posted by wancosc356

No problem. Oh ok. Yea. The heater box is in good shape on the inside. The blower motor actually looks fairly new. The only issue with the box is on the outside of it. Between the inlet and outlet holes for the heater core, there is a hole right in the middle of that area. About the size of a nickel or quarter. Not sure if that is an easy fix or not. Let me know if you want a better pic.

Hello,
I apologize, this has been one crazy busy week for me, so my responses are late.
I am up for a better picture if you have it. How much do you think Shipping would be on this to 93555 here is California? I will create something to patch the hole. It sounds like a workable set up. Do you have all the attachment bolts still?
R/
Billy

**wancosc356** · 09-19-2011, 03:27 PM

Quote:

Originally Posted by longhorn70gmc

Hello,
I apologize, this has been one crazy busy week for me, so my responses are late.
I am up for a better picture if you have it. How much do you think Shipping would be on this to 93555 here is California? I will create something to patch the hole. It sounds like a workable set up. Do you have all the attachment bolts still?
R/
Billy

No problem man. I will get you a better picture this week. Not sure on the shipping. I'll check that out and get back to you on that. Ok. I don't still have the bolts. They weren't any good.

b&a72 · 09-19-2011, 08:35 PM

If they are still available I need the following 3 patches.

jtp67-72 · 09-19-2011, 09:58 PM

Forgot to pm u--got mine .........thanx again.........jim

**wancosc356** · 09-19-2011, 10:01 PM

Quote:

Originally Posted by b&a72

If they are still available I need the following 3 patches.

I think I can help you out with those. Give me a few days to check it out and get back to you.

Quote:

Originally Posted by jtp67-72

Forgot to pm u--got mine .........thanx again.........jim

Glad to hear. Thanks.

b&a72 · 09-19-2011, 10:28 PM

[QUOTE=wancosc356;4908437]I think I can help you out with those. Give me a few days to check it out and get back to you.

Sounds good thanks!

b&a72 · 09-20-2011, 11:20 AM

[QUOTE=wancosc356;4908437]I think I can help you out with those. Give me a few days to check it out and get back to you.

Also if you can on the gas filler patch cut a couple of inches above the body line on top so I can have a little extra metal for trimming if I need it.

09-06-2011, 03:39 PM	#26
indyracer Registered User Join Date: Jul 2006 Location: Alexandria, IN Posts: 134	Re: Cabs For Patches and A 67 Fender For Patches I was just looking over my post after you replied and I wanted to clarify what I wanted. I want the complete corner, door jamb and all. You may have already thought that, but I wanted to make sure because it does look like I was maybe talking about just the area around the window. __________________ Cheers, Tony A day without sunshine is like, you know, night. 1970 Chevy CST10 (Green) 2005 Silverado Z71 2000 Pontiac Bonneville

09-06-2011, 03:42 PM	#27
creepdogg Registered User Join Date: Jul 2011 Location: Ann Arbor Posts: 453	Re: Cabs For Patches and A 67 Fender For Patches I can get you that piece cut out for $40 plus shipping. How big of a piece do you think you will cut out? Should I send you another pic with some tape outlining exactly how big I would like? Thanks

09-06-2011, 06:04 PM	#29
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: Cabs For Patches and A 67 Fender For Patches OK....Everyone who wants patches cut. Shoot me a PM as soon as possible and let me know if you definitely will take the parts. I don't want to cut anything if anyone is going to change their mind or anything like that. Thanks. __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

09-08-2011, 09:43 PM	#30
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: Cabs For Patches and A 67 Fender For Patches Bump __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

09-08-2011, 10:30 PM	#31
68chevyboy Registered User Join Date: Dec 2008 Location: Aurora Missouri Posts: 57	Re: Cabs For Patches and A 67 Fender For Patches How much for the A/C section of the fire wall shipped to 65605, Thanks Brad.

09-09-2011, 04:32 PM	#33
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: Cabs For Patches and A 67 Fender For Patches Hello Michael, I noticed an automatic SIGINAW steering box on the first Cab, does it leak? I also noticed the heater section of the blue cab, is it any good? I may be interested in both of these. Let me know? R/ __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

09-09-2011, 10:26 PM	#37
68chevyboy Registered User Join Date: Dec 2008 Location: Aurora Missouri Posts: 57	Re: Cabs For Patches and A 67 Fender For Patches Yeah I can use it, I need the part the condenser box attaches to

09-09-2011, 11:26 PM	#39
68chevyboy Registered User Join Date: Dec 2008 Location: Aurora Missouri Posts: 57	Re: Cabs For Patches and A 67 Fender For Patches just the front peice

09-10-2011, 12:30 AM	#41
68chevyboy Registered User Join Date: Dec 2008 Location: Aurora Missouri Posts: 57	Re: Cabs For Patches and A 67 Fender For Patches PM sent

09-19-2011, 08:35 PM	#46
b&a72 Active Member Join Date: Oct 2006 Location: Mesa, AZ Posts: 682	Re: Cabs For Patches and A 67 Fender For Patches If they are still available I need the following 3 patches. Attached Images

09-19-2011, 09:58 PM	#47
jtp67-72 Registered User Join Date: Apr 2007 Location: dequincy la. Posts: 1,465	Re: Cabs For Patches and A 67 Fender For Patches Forgot to pm u--got mine .........thanx again.........jim

09-19-2011, 10:28 PM	#49
b&a72 Active Member Join Date: Oct 2006 Location: Mesa, AZ Posts: 682	Re: Cabs For Patches and A 67 Fender For Patches [QUOTE=wancosc356;4908437]I think I can help you out with those. Give me a few days to check it out and get back to you. Sounds good thanks!

09-20-2011, 11:20 AM	#50
b&a72 Active Member Join Date: Oct 2006 Location: Mesa, AZ Posts: 682	Re: Cabs For Patches and A 67 Fender For Patches [QUOTE=wancosc356;4908437]I think I can help you out with those. Give me a few days to check it out and get back to you. Also if you can on the gas filler patch cut a couple of inches above the body line on top so I can have a little extra metal for trimming if I need it.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.