SC Cabs For Patches and A 67 Fender For Patches - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**wancosc356** · 08-05-2011, 09:07 PM

THIS STUFF IS GOING TO THE SCRAP YARD ON FRIDAY

Please post here before sending me a PM. I accept paypal (you pay the fees) or usps money order. Prices do not include shipping.

If you see something that you want and I don't have a price on it....feel free to ask.

1972 A/C cab for patches. Clean SC title. Has already been cut. Patches vary depending on size and cuts. Anywhere from $20-$50 for most patches.

1967 Non A/C Big Back Window cab for patches. No title. Patches vary depending on size and cuts. Anywhere from $20-$50 for most patches.

67 Fender for patches. Take the whole thing for $50.

72 A/C Cab for patches....

67 Cab for patches....

67 Fender for patches....

**wancosc356** · 08-07-2011, 03:23 PM

Ttt

70BLAZERX2 · 08-07-2011, 04:27 PM

how much for the am radio..and the 2 knobs that hold it on the dash...i need something to fill the hole in my dash..dont have to work..

shipped to 37745 Greeneville TN

**wancosc356** · 08-07-2011, 05:00 PM

Quote:

Originally Posted by 70BLAZERX2

how much for the am radio..and the 2 knobs that hold it on the dash...i need something to fill the hole in my dash..dont have to work..

shipped to 37745 Greeneville TN

I sold the retaining rings and knobs a while back. Ill do $60 shipped on the radio. Let me know.

lvwyld1 · 08-07-2011, 06:20 PM

How much for the a/c section of the firewall on the 72? I just want the firewall with the correct openings for the a/c. I am interested for the right price. Thanks!

lvwyld1 · 08-07-2011, 07:33 PM

Nevermind on the firewall piece....I found one locally! Thanks anyway!

**wancosc356** · 09-01-2011, 05:22 PM

Ttt

projectjimmie68 · 09-01-2011, 06:56 PM

Looking for good rear floor corner patches. About a foot out from back wall and a foot in from rocker panel. Both sides plus shipping to zip 32136. Thanks

jtp67-72 · 09-01-2011, 10:17 PM

Need both door jamb patches below door striker plate to top of rocker in 67 if possible-installing bear claws and these would be easy to adapt to fill where door striker plates are now on my cab--thanx jim

creepdogg · 09-01-2011, 10:26 PM

I need a center floor section where I had a 3 speed floor shifter hole cut out still have enough of the floor? I can send a photo too if needed.

**wancosc356** · 09-03-2011, 11:59 AM

Quote:

Originally Posted by projectjimmie68

Looking for good rear floor corner patches. About a foot out from back wall and a foot in from rocker panel. Both sides plus shipping to zip 32136. Thanks

Ok....so u need a patch for both rear floor sections, a foot in from the back a foot in from the rocker, and how big do they need to be forward and towards the center?

Quote:

Originally Posted by jtp67-72

Need both door jamb patches below door striker plate to top of rocker in 67 if possible-installing bear claws and these would be easy to adapt to fill where door striker plates are now on my cab--thanx jim

So below striker plate to the top of the rocker, and how far back into the rear of the cab?

Quote:

Originally Posted by creepdogg

I need a center floor section where I had a 3 speed floor shifter hole cut out still have enough of the floor? I can send a photo too if needed.

The center floor section looks good. A photo would be good and/or some measurements.

creepdogg · 09-03-2011, 12:16 PM

Quote:

Originally Posted by wancosc356

Ok....so u need a patch for both rear floor sections, a foot in from the back a foot in from the rocker, and how big do they need to be forward and towards the center?

So below striker plate to the top of the rocker, and how far back into the rear of the cab?

The center floor section looks good. A photo would be good and/or some measurements.

I will post up a pic sometime this weekend, tks

projectjimmie68 · 09-03-2011, 12:28 PM

A foot square....

bigyellow · 09-03-2011, 01:05 PM

how much for sway bar and brackets?

**wancosc356** · 09-03-2011, 02:03 PM

Quote:

Originally Posted by creepdogg

I will post up a pic sometime this weekend, tks

Sounds good.

Quote:

Originally Posted by projectjimmie68

A foot square....

Ok. Let me check it out and Ill get back to you.

Quote:

Originally Posted by bigyellow

how much for sway bar and brackets?

I'll have to look and see if I still have it somewhere. Someone bought the front suspension and rear axle a while back. Not sure if they took that or not. Ill get back to you.

jtp67-72 · 09-03-2011, 10:55 PM

I will post pic in am of exact cut i need in door jamb........jim

projectjimmie68 · 09-04-2011, 12:40 PM

would like to see the corners in question. Thanks

**wancosc356** · 09-04-2011, 02:22 PM

Quote:

Originally Posted by jtp67-72

I will post pic in am of exact cut i need in door jamb........jim

Sounds good.

Quote:

Originally Posted by projectjimmie68

would like to see the corners in question. Thanks

You can see the floor in the yellow cab. That area that you want looks good.

jtp67-72 · 09-05-2011, 04:48 PM

Sorry I'm late with this--pic of pieces i need --taped the piece i need- I need both sides same place-Will modify it to fill the pocket above for bearclaws--let me know price----jim

**wancosc356** · 09-05-2011, 04:59 PM

PM Sent

LTRAJE · 09-06-2011, 03:33 AM

How much for these pieces? Both pass and drivers side?

creepdogg · 09-06-2011, 12:38 PM

I need a center floor piece, basically the part that people switch over to a high hump, I had a floor shifter in at one time, need to patch her up clean, here is a pic of the piece, you can see the nasty filler piece in there now. Let me know if you can hook me up

thanks

Chris

Triple B · 09-06-2011, 12:42 PM

Im looking for left rear stepside fender. Some reason your pictures wont show up on my message boards. could you send me a pic of what you have in a message?

indyracer · 09-06-2011, 01:10 PM

I am looking for the two spots I have outlined. Let me know what you can do and the cost.

**wancosc356** · 09-06-2011, 03:28 PM

Quote:

Originally Posted by LTRAJE

How much for these pieces? Both pass and drivers side?

$30 each plus shipping...if they are in good shape. I'll double check this afternoon and get back to you.

Quote:

Originally Posted by creepdogg

I need a center floor piece, basically the part that people switch over to a high hump, I had a floor shifter in at one time, need to patch her up clean, here is a pic of the piece, you can see the nasty filler piece in there now. Let me know if you can hook me up

thanks

Chris

I can get you that piece cut out for $40 plus shipping.

Quote:

Originally Posted by Triple B

Im looking for left rear stepside fender. Some reason your pictures wont show up on my message boards. could you send me a pic of what you have in a message?

No stepside fenders. Sorry.

Quote:

Originally Posted by indyracer

I am looking for the two spots I have outlined. Let me know what you can do and the cost.

I can cut those pieces for $40 for the both plus shipping.

08-05-2011, 09:07 PM	#1
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Cabs For Patches and A 67 Fender For Patches THIS STUFF IS GOING TO THE SCRAP YARD ON FRIDAY Please post here before sending me a PM. I accept paypal (you pay the fees) or usps money order. Prices do not include shipping. If you see something that you want and I don't have a price on it....feel free to ask. 1972 A/C cab for patches. Clean SC title. Has already been cut. Patches vary depending on size and cuts. Anywhere from $20-$50 for most patches. 1967 Non A/C Big Back Window cab for patches. No title. Patches vary depending on size and cuts. Anywhere from $20-$50 for most patches. 67 Fender for patches. Take the whole thing for $50. 72 A/C Cab for patches.... 67 Cab for patches.... 67 Fender for patches.... __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152 Last edited by wancosc356; 10-25-2011 at 09:20 PM. Reason: Update

08-07-2011, 03:23 PM	#2
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: Cabs For Patches and A 67 Fender For Patches Ttt __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

08-07-2011, 04:27 PM	#3
70BLAZERX2 Registered User Join Date: Jan 2010 Location: GREENEVILLE TENNESSEE Posts: 1,310	Re: Cabs For Patches and A 67 Fender For Patches how much for the am radio..and the 2 knobs that hold it on the dash...i need something to fill the hole in my dash..dont have to work.. shipped to 37745 Greeneville TN

08-07-2011, 06:20 PM	#5
lvwyld1 Registered User Join Date: Aug 2011 Location: Las Vegas, NV Posts: 11	Re: Cabs For Patches and A 67 Fender For Patches How much for the a/c section of the firewall on the 72? I just want the firewall with the correct openings for the a/c. I am interested for the right price. Thanks!

08-07-2011, 07:33 PM	#6
lvwyld1 Registered User Join Date: Aug 2011 Location: Las Vegas, NV Posts: 11	Re: Cabs For Patches and A 67 Fender For Patches Nevermind on the firewall piece....I found one locally! Thanks anyway!

09-01-2011, 05:22 PM	#7
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: Cabs For Patches and A 67 Fender For Patches Ttt __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

09-01-2011, 06:56 PM	#8
projectjimmie68 Registered User Join Date: Oct 2009 Location: Flagler Beach,Fl. Posts: 455	Re: Cabs For Patches and A 67 Fender For Patches Looking for good rear floor corner patches. About a foot out from back wall and a foot in from rocker panel. Both sides plus shipping to zip 32136. Thanks

09-01-2011, 10:17 PM	#9
jtp67-72 Registered User Join Date: Apr 2007 Location: dequincy la. Posts: 1,465	Re: Cabs For Patches and A 67 Fender For Patches Need both door jamb patches below door striker plate to top of rocker in 67 if possible-installing bear claws and these would be easy to adapt to fill where door striker plates are now on my cab--thanx jim

09-01-2011, 10:26 PM	#10
creepdogg Registered User Join Date: Jul 2011 Location: Ann Arbor Posts: 453	Re: Cabs For Patches and A 67 Fender For Patches I need a center floor section where I had a 3 speed floor shifter hole cut out still have enough of the floor? I can send a photo too if needed.

09-03-2011, 12:28 PM	#13
projectjimmie68 Registered User Join Date: Oct 2009 Location: Flagler Beach,Fl. Posts: 455	Re: Cabs For Patches and A 67 Fender For Patches A foot square....

09-03-2011, 01:05 PM	#14
bigyellow Registered User Join Date: Aug 2011 Location: Six-Mile, SC Posts: 153	Re: Cabs For Patches and A 67 Fender For Patches how much for sway bar and brackets? __________________ Six in a row makes it go

09-03-2011, 10:55 PM	#16
jtp67-72 Registered User Join Date: Apr 2007 Location: dequincy la. Posts: 1,465	Re: Cabs For Patches and A 67 Fender For Patches I will post pic in am of exact cut i need in door jamb........jim

09-04-2011, 12:40 PM	#17
projectjimmie68 Registered User Join Date: Oct 2009 Location: Flagler Beach,Fl. Posts: 455	Re: Cabs For Patches and A 67 Fender For Patches would like to see the corners in question. Thanks

09-05-2011, 04:48 PM	#19
jtp67-72 Registered User Join Date: Apr 2007 Location: dequincy la. Posts: 1,465	Re: Cabs For Patches and A 67 Fender For Patches Sorry I'm late with this--pic of pieces i need --taped the piece i need- I need both sides same place-Will modify it to fill the pocket above for bearclaws--let me know price----jim Attached Images

09-05-2011, 04:59 PM	#20
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: Cabs For Patches and A 67 Fender For Patches PM Sent __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152



Register or Log In To remove these advertisements.

09-06-2011, 03:33 AM	#21
LTRAJE Registered User Join Date: Mar 2010 Location: Makawao Hawaii Posts: 15	Re: Cabs For Patches and A 67 Fender For Patches How much for these pieces? Both pass and drivers side?

09-06-2011, 12:38 PM	#22
creepdogg Registered User Join Date: Jul 2011 Location: Ann Arbor Posts: 453	Re: Cabs For Patches and A 67 Fender For Patches I need a center floor piece, basically the part that people switch over to a high hump, I had a floor shifter in at one time, need to patch her up clean, here is a pic of the piece, you can see the nasty filler piece in there now. Let me know if you can hook me up thanks Chris Attached Images

09-06-2011, 12:42 PM	#23
Triple B Registered User Join Date: Aug 2010 Location: virginia Posts: 3	Re: Cabs For Patches and A 67 Fender For Patches Im looking for left rear stepside fender. Some reason your pictures wont show up on my message boards. could you send me a pic of what you have in a message?

09-06-2011, 01:10 PM	#24
indyracer Registered User Join Date: Jul 2006 Location: Alexandria, IN Posts: 134	Re: Cabs For Patches and A 67 Fender For Patches I am looking for the two spots I have outlined. Let me know what you can do and the cost. Attached Images __________________ Cheers, Tony A day without sunshine is like, you know, night. 1970 Chevy CST10 (Green) 2005 Silverado Z71 2000 Pontiac Bonneville

Register or Log In To remove these advertisements.