SC Cabs For Patches and A 67 Fender For Patches - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tanman722001 · 11-07-2011, 02:02 PM

Hi what would you want for this patch?Shipped to 27028?Thanks Tony

**wancosc356** · 11-07-2011, 03:59 PM

$20 for the patch. Plus shipping. Not sure on the cost of shipping til I get it cut. I'd say no more than $10-$15. Let me know.

tanman722001 · 11-07-2011, 06:22 PM

Should fit in a priority flat rate box from the post office.

**wancosc356** · 11-07-2011, 06:25 PM

Quote:

Originally Posted by tanman722001

Should fit in a priority flat rate box from the post office.

Exactly. Thats why I said $10-$15. If you definitely want the patch, let me know and I will cut it out. Some dimensions would help too.

tanman722001 · 11-07-2011, 09:26 PM

Ok i will try to explain what part I need.From the top of the 2 bolt for the gas pedal.The one on the right looking at it is 8 inch accross towards steering column.Then one inch above them two bolt down 6 inches.I hope I explained it right.So I have the complete hole for the clutch rod.Mine is hacked up twice as big as it should be.

**wancosc356** · 11-08-2011, 11:14 AM

Quote:

Originally Posted by tanman722001

Ok i will try to explain what part I need.From the top of the 2 bolt for the gas pedal.The one on the right looking at it is 8 inch accross towards steering column.Then one inch above them two bolt down 6 inches.I hope I explained it right.So I have the complete hole for the clutch rod.Mine is hacked up twice as big as it should be.

Thats kinda confusing. If I cut out the area you circled...will that be enough? Also, as soon as you give me the go ahead, Ill cut it out and box it up. Thanks.

**wancosc356** · 11-11-2011, 07:59 PM

Ttt

longhorn70gmc · 11-14-2011, 08:30 PM

Hello Michael,
I PM'ed ya.
R/

**wancosc356** · 11-15-2011, 07:34 PM

Got it. The heater box from the blue cab is sold. Thanks.

**wancosc356** · 11-19-2011, 04:31 PM

Bump

**wancosc356** · 11-22-2011, 10:19 PM

Ttt

creepdogg · 11-23-2011, 04:33 PM

I need a floor cut near the center were the high hump would normally go. Do you still have any pieces of the center floor avail? I will post a pic if you have some avail still

Thanks

**wancosc356** · 11-23-2011, 04:44 PM

Quote:

Originally Posted by creepdogg

I need a floor cut near the center were the high hump would normally go. Do you still have any pieces of the center floor avail? I will post a pic if you have some avail still

Thanks

I still have the floors of both cabs. Let me know exactly what you need.

**wancosc356** · 11-28-2011, 07:55 PM

Ttt

mcbassin · 11-28-2011, 08:13 PM

Do you still have this portion available? Need dent and rust free patch.

jessewebb · 11-28-2011, 08:48 PM

do you still have the firewall from the a\c cab?

longhorn70gmc · 12-01-2011, 11:41 AM

Hey Bro,
wonderful heater box piece. Thanks for taking care of me. I PM'ed you. Take care and good luck on all your sales.
Hey all, Michael is GOOD PEOPLE to work with on here if you need any of his featured parts.
R/

creepdogg · 12-01-2011, 01:01 PM

I am looking for a patch to cover up this horrible patch job from my old 3 spd on the floor. It could be cut larger if necessary, I am just thinking smaller box may keep cost down. Price me out shipped if possible to 48104, tks

**wancosc356** · 12-06-2011, 12:20 PM

Quote:

Originally Posted by mcbassin

Do you still have this portion available? Need dent and rust free patch.

I still have that portion. Not sure on the dent and rust free. I'll have to double check.

Quote:

Originally Posted by jessewebb

do you still have the firewall from the a\c cab?

I still have part of the firewall. The a/c box area has been cut out and sold.

Quote:

Originally Posted by longhorn70gmc

Hey Bro,
wonderful heater box piece. Thanks for taking care of me. I PM'ed you. Take care and good luck on all your sales.
Hey all, Michael is GOOD PEOPLE to work with on here if you need any of his featured parts.
R/

Thanks. No problem. Thank you for the kind words.

Quote:

Originally Posted by creepdogg

I am looking for a patch to cover up this horrible patch job from my old 3 spd on the floor. It could be cut larger if necessary, I am just thinking smaller box may keep cost down. Price me out shipped if possible to 48104, tks

I'll check that out and get back to you.

**wancosc356** · 12-17-2011, 01:57 PM

TTT....Last call

**wancosc356** · 01-24-2012, 06:54 PM

Bump

**wancosc356** · 01-31-2012, 10:10 PM

Ttt

mcbassin · 02-01-2012, 12:29 AM

Michael,
I don't need that portion I marked. As I picked up a different cab. What is the condition of the drip rails? I would be interested in some long pieces for patches or the complete drip rail, tell me what you got. thanks

loosecannonzs · 02-02-2012, 02:00 AM

I need this section from both sides of the cab if they are rust hole free and still available. Shipped to 33021

Thanks, Ron

C5Phil · 02-02-2012, 05:55 AM

. By chance would you still have/consider selling- a cut out patch from your cab -I need the piece that incorporates the gas filler neck behind the drivers door- if you could cut me a patch panel that runs from the trim line two inches above filler to about 10-12 inches below the filler (I don't need the door jamb- just to the edge of the jamb and to the back of the cab)) I'd be very appreciative-- I hope I'm describing it correctly but my cab - under Po- took a hit right under gas filler neck- PO bondo-ed the area and I'd like to repair it properly-- let me know- - Thanks- Phil H.

11-07-2011, 02:02 PM	#76
tanman722001 Registered User Join Date: Oct 2010 Location: Mocksville,NC Posts: 419	Re: Cabs For Patches and A 67 Fender For Patches Hi what would you want for this patch?Shipped to 27028?Thanks Tony __________________ 1991 GMC K2500 4X4 350/auto 1991 Chevy S10 ext cab. 1990 Chevy S10 1993 Chevy S10 Blazer 4dr 4.3 Vortex/Auto

11-07-2011, 03:59 PM	#77
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: Cabs For Patches and A 67 Fender For Patches $20 for the patch. Plus shipping. Not sure on the cost of shipping til I get it cut. I'd say no more than $10-$15. Let me know. __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

11-07-2011, 06:22 PM	#78
tanman722001 Registered User Join Date: Oct 2010 Location: Mocksville,NC Posts: 419	Re: Cabs For Patches and A 67 Fender For Patches Should fit in a priority flat rate box from the post office. __________________ 1991 GMC K2500 4X4 350/auto 1991 Chevy S10 ext cab. 1990 Chevy S10 1993 Chevy S10 Blazer 4dr 4.3 Vortex/Auto

11-07-2011, 09:26 PM	#80
tanman722001 Registered User Join Date: Oct 2010 Location: Mocksville,NC Posts: 419	Re: Cabs For Patches and A 67 Fender For Patches Ok i will try to explain what part I need.From the top of the 2 bolt for the gas pedal.The one on the right looking at it is 8 inch accross towards steering column.Then one inch above them two bolt down 6 inches.I hope I explained it right.So I have the complete hole for the clutch rod.Mine is hacked up twice as big as it should be. __________________ 1991 GMC K2500 4X4 350/auto 1991 Chevy S10 ext cab. 1990 Chevy S10 1993 Chevy S10 Blazer 4dr 4.3 Vortex/Auto

11-11-2011, 07:59 PM	#82
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: Cabs For Patches and A 67 Fender For Patches Ttt __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

11-14-2011, 08:30 PM	#83
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: Cabs For Patches and A 67 Fender For Patches Hello Michael, I PM'ed ya. R/ __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

11-15-2011, 07:34 PM	#84
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: Cabs For Patches and A 67 Fender For Patches Got it. The heater box from the blue cab is sold. Thanks. __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

11-19-2011, 04:31 PM	#85
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: Cabs For Patches and A 67 Fender For Patches Bump __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

11-22-2011, 10:19 PM	#86
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: Cabs For Patches and A 67 Fender For Patches Ttt __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

11-23-2011, 04:33 PM	#87
creepdogg Registered User Join Date: Jul 2011 Location: Ann Arbor Posts: 453	Re: Cabs For Patches and A 67 Fender For Patches I need a floor cut near the center were the high hump would normally go. Do you still have any pieces of the center floor avail? I will post a pic if you have some avail still Thanks

11-28-2011, 07:55 PM	#89
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: Cabs For Patches and A 67 Fender For Patches Ttt __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

11-28-2011, 08:13 PM	#90
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Cabs For Patches and A 67 Fender For Patches Do you still have this portion available? Need dent and rust free patch. Attached Images __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

11-28-2011, 08:48 PM	#91
jessewebb Registered User Join Date: May 2010 Location: beckley, WV. Posts: 823	Re: Cabs For Patches and A 67 Fender For Patches do you still have the firewall from the a\c cab? __________________ *Pete* The worst I ever had was wonderful *69 SWB* work in progress *97 Ranger* 6in. lift on 35's *04 325i* lady's ride

12-01-2011, 11:41 AM	#92
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: Cabs For Patches and A 67 Fender For Patches Hey Bro, wonderful heater box piece. Thanks for taking care of me. I PM'ed you. Take care and good luck on all your sales. Hey all, Michael is GOOD PEOPLE to work with on here if you need any of his featured parts. R/ __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

12-01-2011, 01:01 PM	#93
creepdogg Registered User Join Date: Jul 2011 Location: Ann Arbor Posts: 453	Re: Cabs For Patches and A 67 Fender For Patches I am looking for a patch to cover up this horrible patch job from my old 3 spd on the floor. It could be cut larger if necessary, I am just thinking smaller box may keep cost down. Price me out shipped if possible to 48104, tks Attached Images



Register or Log In To remove these advertisements.

12-17-2011, 01:57 PM	#95
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: Cabs For Patches and A 67 Fender For Patches TTT....Last call __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

01-24-2012, 06:54 PM	#96
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: Cabs For Patches and A 67 Fender For Patches Bump __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

01-31-2012, 10:10 PM	#97
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: Cabs For Patches and A 67 Fender For Patches Ttt __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

02-01-2012, 12:29 AM	#98
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Cabs For Patches and A 67 Fender For Patches Michael, I don't need that portion I marked. As I picked up a different cab. What is the condition of the drip rails? I would be interested in some long pieces for patches or the complete drip rail, tell me what you got. thanks __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

02-02-2012, 02:00 AM	#99
loosecannonzs Registered User Join Date: Apr 2010 Location: Hollywood, Fl Posts: 29	Re: Cabs For Patches and A 67 Fender For Patches I need this section from both sides of the cab if they are rust hole free and still available. Shipped to 33021 Thanks, Ron

02-02-2012, 05:55 AM	#100
C5Phil Registered User Join Date: Nov 2011 Location: Williamson New York Posts: 427	Re: Cabs For Patches and A 67 Fender For Patches . By chance would you still have/consider selling- a cut out patch from your cab -I need the piece that incorporates the gas filler neck behind the drivers door- if you could cut me a patch panel that runs from the trim line two inches above filler to about 10-12 inches below the filler (I don't need the door jamb- just to the edge of the jamb and to the back of the cab)) I'd be very appreciative-- I hope I'm describing it correctly but my cab - under Po- took a hit right under gas filler neck- PO bondo-ed the area and I'd like to repair it properly-- let me know- - Thanks- Phil H.

Register or Log In To remove these advertisements.