Fleetside bedside - The 1947 - Present Chevrolet & GMC Truck Message Board Network

zeeklu · 04-25-2004, 10:03 AM

Drivers side bedside. Some bondo on lower front from dent.$75 OBO. Also have a lot of other misc parts.( Good pass door w/speaker hole $35)

Chris

zeeklu · 04-25-2004, 10:04 AM

zeeklu · 04-25-2004, 10:18 AM

Mint smooth tailgate.$75 OBO Must P/u.

zeeklu · 04-25-2004, 10:19 AM

FrankHoy · 04-25-2004, 10:54 AM

I would take the tailgate, if you would ship to 50317!?

zeeklu · 04-25-2004, 11:16 AM

I would rather not ship due to damage.I recieved a tailgate from a very reputible vendor and it received some damage and was told most shipping companys ( UPS,Fedex etc.) don't accept sheetmetal damage claims very well and most get denied. Chris

**ScottH** · 04-25-2004, 11:19 AM

Chris, what happened, decided not to go with the bed? I'll take the tailgate if still available. I'll include the payment with the check I have send you for the hood and figure pick up later if that's ok.

Thanks.

Scott

zeeklu · 04-25-2004, 12:14 PM

Scott, I replaced the one side because I am trying to minimize the bondo. The tailgate is yours,pick it up at your convenience. Here's your bed. Chris

spencra · 04-25-2004, 12:39 PM

Hey zeeklu, I'm interested in the passenger door. Do you have any pics of it.

Thanks,
Larry

**ScottH** · 04-25-2004, 05:10 PM

Chris,

Thanks again, I'll send the check out to you this week and let you know about pickup. The bed looks great, looks like the truck is coming together.

Scott

zeeklu · 04-25-2004, 06:01 PM

zeeklu · 04-25-2004, 06:06 PM

zeeklu · 04-25-2004, 06:11 PM

zeeklu · 04-25-2004, 06:12 PM

Thats just dirt on the bottom edge .

spencra · 04-25-2004, 07:04 PM

I'm interested in the door. What year is that from? Will it fit a 67? It almost looks like it came from a 72.

Thanks,
Larry

zeeklu · 04-25-2004, 07:12 PM

It came off a 69 but they are all interchangable.72 had longer shafts on the window regulator and door handle due to thicker door panels.72 also had some minor other differences(small hole just below the divider bar for the wing window and roll up window) but they will still interchange.I'll throw in a drivers side door also thats a little rough but i think I have patch panels for it.Anything else you need just ask looking to do some spring cleaning. Chris

spencra · 04-26-2004, 09:40 AM

Hey Chris, I'll take the door. If you don't mind, I would like to see how things go with the step bed before I take a ride down there so I won't have to make two trips. Just let me know.

Thanks alot Chris,
Larry

zeeklu · 04-26-2004, 04:36 PM

No problem . So far everything is yours. That will work out good,we can load the bed with a lot of parts I have laying around. I will e-mail you with my phone number so we can set up a date. Chris

spencra · 04-26-2004, 05:25 PM

Sounds good. I got your e-mail and phone number. I'll give you a call tonight before 7:30pm.

Thanks,
Larry

04-25-2004, 10:03 AM	#1
zeeklu Registered User Join Date: Dec 1999 Location: Northwest NJ Posts: 746	Fleetside bedside Drivers side bedside. Some bondo on lower front from dent.$75 OBO. Also have a lot of other misc parts.( Good pass door w/speaker hole $35) Chris

04-25-2004, 10:54 AM	#5
FrankHoy Registered User Join Date: Aug 2002 Location: Des Moines, IA Posts: 154	I would take the tailgate, if you would ship to 50317!? __________________ 72 Cheyenne 2wd LWB 402/350 CC/PS/PB/AC Tilt/Tach (upgrading to 4X4 402/700R4 CC/PS/PB/AC Tilt/Tach PW/PL) 71 Custom Deluxe 350/350 Tilt/PS/PB 00 Blazer

04-25-2004, 12:39 PM	#9
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	Hey zeeklu, I'm interested in the passenger door. Do you have any pics of it. Thanks, Larry __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

04-25-2004, 07:04 PM	#15
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	I'm interested in the door. What year is that from? Will it fit a 67? It almost looks like it came from a 72. Thanks, Larry __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

04-25-2004, 07:12 PM	#16
zeeklu Registered User Join Date: Dec 1999 Location: Northwest NJ Posts: 746	It came off a 69 but they are all interchangable.72 had longer shafts on the window regulator and door handle due to thicker door panels.72 also had some minor other differences(small hole just below the divider bar for the wing window and roll up window) but they will still interchange.I'll throw in a drivers side door also thats a little rough but i think I have patch panels for it.Anything else you need just ask looking to do some spring cleaning. Chris Last edited by zeeklu; 04-25-2004 at 07:22 PM.

04-25-2004, 10:04 AM	#2
zeeklu Registered User Join Date: Dec 1999 Location: Northwest NJ Posts: 746

04-25-2004, 10:18 AM	#3
zeeklu Registered User Join Date: Dec 1999 Location: Northwest NJ Posts: 746	Mint smooth tailgate.$75 OBO Must P/u.

04-25-2004, 10:19 AM	#4
zeeklu Registered User Join Date: Dec 1999 Location: Northwest NJ Posts: 746

04-25-2004, 11:16 AM	#6
zeeklu Registered User Join Date: Dec 1999 Location: Northwest NJ Posts: 746	I would rather not ship due to damage.I recieved a tailgate from a very reputible vendor and it received some damage and was told most shipping companys ( UPS,Fedex etc.) don't accept sheetmetal damage claims very well and most get denied. Chris

04-25-2004, 11:19 AM	#7
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,193	Chris, what happened, decided not to go with the bed? I'll take the tailgate if still available. I'll include the payment with the check I have send you for the hood and figure pick up later if that's ok. Thanks. Scott

04-25-2004, 12:14 PM	#8
zeeklu Registered User Join Date: Dec 1999 Location: Northwest NJ Posts: 746	Scott, I replaced the one side because I am trying to minimize the bondo. The tailgate is yours,pick it up at your convenience. Here's your bed. Chris

04-25-2004, 05:10 PM	#10
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,193	Chris, Thanks again, I'll send the check out to you this week and let you know about pickup. The bed looks great, looks like the truck is coming together. Scott

04-25-2004, 06:01 PM	#11
zeeklu Registered User Join Date: Dec 1999 Location: Northwest NJ Posts: 746

04-25-2004, 06:06 PM	#12
zeeklu Registered User Join Date: Dec 1999 Location: Northwest NJ Posts: 746

04-25-2004, 06:11 PM	#13
zeeklu Registered User Join Date: Dec 1999 Location: Northwest NJ Posts: 746



Register or Log In To remove these advertisements.

04-25-2004, 06:12 PM	#14
zeeklu Registered User Join Date: Dec 1999 Location: Northwest NJ Posts: 746	Thats just dirt on the bottom edge .

04-26-2004, 09:40 AM	#17
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	Hey Chris, I'll take the door. If you don't mind, I would like to see how things go with the step bed before I take a ride down there so I won't have to make two trips. Just let me know. Thanks alot Chris, Larry __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

04-26-2004, 04:36 PM	#18
zeeklu Registered User Join Date: Dec 1999 Location: Northwest NJ Posts: 746	No problem . So far everything is yours. That will work out good,we can load the bed with a lot of parts I have laying around. I will e-mail you with my phone number so we can set up a date. Chris

04-26-2004, 05:25 PM	#19
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	Sounds good. I got your e-mail and phone number. I'll give you a call tonight before 7:30pm. Thanks, Larry __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

Register or Log In To remove these advertisements.