wtb gear drive for SBC - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67ChevyC10Stepside · 04-29-2004, 12:35 AM

let me know what you have

Nvbowtie · 04-29-2004, 02:20 AM

Cloyes Gear Drive

time in use about 3 hrs - in other words new.

http://www.unlimited2u.com/engine

Pulling mine too much noise for the decent folk around me, replacing with a double roller.

75.00 shipped

Lester · 04-30-2004, 11:48 AM

Might still have one from an engine in a project I bought that had only been started to break in the cam (30 minutes use) but never driven.

$30 obo plus shipping. I'm located in Central Ohio. Email me at videos@bright.net if you are interested and I'll check to see if I still have this.

soleeagle · 05-01-2004, 01:13 AM

Quote:

Originally posted by Lester
Might still have one from an engine in a project I bought that had only been started to break in the cam (30 minutes use) but never driven.

$30 obo plus shipping. I'm located in Central Ohio. Email me at videos@bright.net if you are interested and I'll check to see if I still have this.

If he dosnt want it let me know, I am interested in it.

Lester · 05-01-2004, 09:17 AM

Still go it.

Its a Pete Jackson Dual Idler and I have the install instructions too.

Whomever is intertested in this needs to email me at videos@bright.net

I don't check this board very often and don't conduct business on the board, only email or on the phone.

Let me know if you need anything else.

Thanks.

Lester

67ChevyC10Stepside · 05-01-2004, 11:18 AM

i want it

04-29-2004, 12:35 AM	#1
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	wtb gear drive for SBC let me know what you have __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

04-29-2004, 02:20 AM	#2
Nvbowtie Registered User Join Date: Jul 2001 Location: Laughlin, Nv. USA Posts: 700	Cloyes Gear Drive time in use about 3 hrs - in other words new. http://www.unlimited2u.com/engine Pulling mine too much noise for the decent folk around me, replacing with a double roller. 75.00 shipped __________________ www.unlimited2u.com/chevy Bill 1980 Chevy C-10 Silverado 1988 Chevy Blazer Tahoe

05-01-2004, 11:18 AM	#6
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	i want it __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

04-30-2004, 11:48 AM	#3
Lester Registered User Join Date: Oct 2002 Posts: 84	Might still have one from an engine in a project I bought that had only been started to break in the cam (30 minutes use) but never driven. $30 obo plus shipping. I'm located in Central Ohio. Email me at videos@bright.net if you are interested and I'll check to see if I still have this.

05-01-2004, 09:17 AM	#5
Lester Registered User Join Date: Oct 2002 Posts: 84	Still go it. Its a Pete Jackson Dual Idler and I have the install instructions too. Whomever is intertested in this needs to email me at videos@bright.net I don't check this board very often and don't conduct business on the board, only email or on the phone. Let me know if you need anything else. Thanks. Lester



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.