Wanted Intake and Carb - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MrSeKrEt · 05-03-2004, 05:01 AM

Im tearing out all the electronic crap in my truck 87 TBI. Due to the bad wiring and the fact Im tired of messing with it. So Im looking for an intake and carb. The intake can be pre 87. I'll just dremmel the bolt holes -=o)
Also Im looking for a non computerized distributor. I believe that would be pre 83?? Correct me someone if Im wrong.

)3rian

alf4444 · 05-03-2004, 11:15 AM

Ive got a jet performance stage II quadrajet only ran for around 15 min. I'll sell ya for $200 plus ride

**crossy** · 05-03-2004, 12:42 PM

you'll be fine with any pre 85 carb. that's a lot of work with a dremel. better to use a 7/16 drill bit and ream it ! 86-87 chevy cars(monte , Camaro) are a good place to find the correct manifold though. DAVE

rich-white · 05-03-2004, 08:52 PM

I've got a stock 73 sbc steel intake for a 4 barrel and 2 q-jets. Will take 75 for the 1 carb and intake plus shipping

454_72_4X4 · 05-03-2004, 11:52 PM

I've got an aluminum Edelbrock SP2P intake I'd take $45+sh for.
It's a good economy or stock rep[lacement intake.

greg0380 · 05-04-2004, 07:06 AM

what's wrong with the TBI? Are you looking to get rid of it, I wanted to put FI on my truck so maybe I'd be interested init.

MrSeKrEt · 05-04-2004, 06:57 PM

Thanx everyone one for all the offers and info. But I just found out my buddie has the parts I need setting on the shelf in his shop. As far as the TBI setup when I got the truck the wires were pretty shot. Some broke some cut. So I don't know what works and what doesn't. So if anyone wants to make me an offer keep that in mind. Also I know the wiring would have to be replaced.

05-03-2004, 05:01 AM	#1
MrSeKrEt Registered User Join Date: Apr 2004 Location: Lansing MI Posts: 8	Wanted Intake and Carb Im tearing out all the electronic crap in my truck 87 TBI. Due to the bad wiring and the fact Im tired of messing with it. So Im looking for an intake and carb. The intake can be pre 87. I'll just dremmel the bolt holes -=o) Also Im looking for a non computerized distributor. I believe that would be pre 83?? Correct me someone if Im wrong. )3rian

05-03-2004, 11:15 AM	#2
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	Ive got a jet performance stage II quadrajet only ran for around 15 min. I'll sell ya for $200 plus ride __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

05-03-2004, 12:42 PM	#3
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	you'll be fine with any pre 85 carb. that's a lot of work with a dremel. better to use a 7/16 drill bit and ream it ! 86-87 chevy cars(monte , Camaro) are a good place to find the correct manifold though. DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

05-03-2004, 11:52 PM	#5
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	I've got an aluminum Edelbrock SP2P intake I'd take $45+sh for. It's a good economy or stock rep[lacement intake. __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

05-03-2004, 08:52 PM	#4
rich-white Registered User Join Date: Feb 2004 Location: st. Louis Missouri Posts: 414	I've got a stock 73 sbc steel intake for a 4 barrel and 2 q-jets. Will take 75 for the 1 carb and intake plus shipping

05-04-2004, 07:06 AM	#6
greg0380 Registered User Join Date: Dec 2003 Location: CT Posts: 454	what's wrong with the TBI? Are you looking to get rid of it, I wanted to put FI on my truck so maybe I'd be interested init.

05-04-2004, 06:57 PM	#7
MrSeKrEt Registered User Join Date: Apr 2004 Location: Lansing MI Posts: 8	Thanx everyone one for all the offers and info. But I just found out my buddie has the parts I need setting on the shelf in his shop. As far as the TBI setup when I got the truck the wires were pretty shot. Some broke some cut. So I don't know what works and what doesn't. So if anyone wants to make me an offer keep that in mind. Also I know the wiring would have to be replaced.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.