|
05-04-2004, 07:51 PM
|
#1 |
|
Geared for Collision
Join Date: Jan 2004
Location: St. Louis, Mo.
Posts: 683
|
jack stands
what are you guys with 6" lift using for jack stands in the back, i need to get it up off the ground completely but having a hard time finding some jack stands. i seen one set but they wanted 500.00 for lol cant afford that im on a small budget. i want something safe definitely as i'll pretty much be living under there for week or so. i think my jack with few timbers will be ok to get it up there just looking for soulution for jack stands. and i cant weld anything up for it as only got a 110 mig so wouldnt be solid enough. measured it and looks like would need 35" or higher jack stands. if anyone knows where to locate these for decent price and could link or info would be appreciated.
__________________
MEMBER OF THE 4 WHEEL DISK BRAKE CLUB 1970 C/K20 3/4 Ton 1996 Collectors Edition Corvette 1977 Corvette Coupe |
|
|
|
05-04-2004, 08:11 PM
|
#2 |
|
user # 2756
 
Join Date: Jun 2001
Location: Chesapeake, Virginia
Posts: 4,612
|
Are you trying to support the rear by the frame w/ tires on?
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm 
Last edited by JIMs70GMC; 05-04-2004 at 08:13 PM. |
|
|
|
|
05-04-2004, 08:43 PM
|
#3 |
|
Account Suspended
Join Date: Oct 2002
Location: Elkhart, IN
Posts: 6,399
|
i've got 4 of the saem jackstands, and plan on finding a piece of 8" I-beam to make some risers out of for when my truck gets a little taller.
|
|
|
|
|
05-04-2004, 10:42 PM
|
#4 |
|
Geared for Collision
Join Date: Jan 2004
Location: St. Louis, Mo.
Posts: 683
|
lol i must have bumped my head , thanks jim i was trying to set behind rear end was prob, i have the same stands as well and just measured and they should work fine.
__________________
MEMBER OF THE 4 WHEEL DISK BRAKE CLUB 1970 C/K20 3/4 Ton 1996 Collectors Edition Corvette 1977 Corvette Coupe |
|
|
|
|
05-07-2004, 09:33 PM
|
#5 |
|
City's Articulation Ramp
Join Date: Jan 2004
Location: St. Louis Missouri
Posts: 452
|
I used 3 ton stands from autozone
__________________
85 K90 SWB Rockwells 46x19.5 on double beadlocks 20" lift 305/sm465/NP208 Toy 00 Silverado 2wd SWB 4.8 auto 3/4 drop slamair bags esclade rims Daily Driver 06 Harley Sporster 883 low 19?? Zamboni, Really I own a Zamboni! "If your gonna be stupid, then you better be tough." |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
