question about trun signals

[kamikazegmc]

i got some used turn signal lens with the harnnes. my question is that when hooked it up looked great, but when i check to see if it all work the drive side worked great. the passnager side is dim and the driver side binks dim. any info would help thanks

[Noah's65]

If your wiring/connections are all good, I would probably check for good grounds. Make sure anything that needs to be grounded is grounded on a spot that's clean, not corroded/painted. Hope this helps -Noah

[kamikazegmc]

i'm using chevy set up on my gmc. and the driver side has three wires and the other side has two would that make a difference? any info would help

[kewlbear]

I just bought a harness from LMC and its like what you
described. That third wire on mine is a pigtail park light
wire for license plate light, has a small male plug on end
of it. Shouldn't have anything to do with your problem. I'm
thinkin like noah, bad ground.

[kamikazegmc]

i fix my problem all i did was take a little file and filed down the progs in the connector and that was it.