|
06-27-2004, 06:13 PM
|
#1 |
|
Registered User
Join Date: Sep 2002
Location: long island, new york
Posts: 1,333
|
front axel I.D
ok i think it came out of a 74 one ton truck it is 8 lug manual locking hubs,
the #s on the diff tag say 45-11 and 4.09 then there are numbers in the webbing that say 44-50F and finally on top it says 036555 the reason i want to know is that i need to buy brakes for this thing thanks -kyle 
__________________
1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door |
|
|
|
06-27-2004, 06:15 PM
|
#2 |
|
Registered User
Join Date: Sep 2002
Location: long island, new york
Posts: 1,333
|
for the pics sorry
__________________
1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door |
|
|
|
|
06-27-2004, 06:30 PM
|
#3 |
|
Senior Member
Join Date: May 2004
Location: Binghamton, NY
Posts: 3,469
|
It's a Dana 44HD. It's pretty much the same as a regular 44, but has thicker axles tubes, bigger hubs, and Im know there is more, but right now I cant' think of what they are. Those numbers don't really mean too much, the ones that you need are on the long tube, facing the front of the truck. It will have a 6 digit number followed by a single digit, then the year, 603455 8 9 7 3 being semptember 7 1973. I have the same axle in my suburban. Just go to the parts store and tell them the year, and they can get brakes for you. I think they are the same as a later 44.
__________________
2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 4” SAS 1999 GMC Yukon 350/4L60 6" SAS |
|
|
|
|
06-28-2004, 07:52 AM
|
#4 |
|
Registered User
Join Date: Sep 2002
Location: long island, new york
Posts: 1,333
|
the thing in that i dont know what it came ut of i got it out of a salaxe yard axle pile so what should i tell the parts boy to look it up as ? thanks for all the help -kyle
ps this is want im working with, my 350 doller truck
__________________
1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door |
|
|
|
|
06-28-2004, 08:50 AM
|
#5 |
|
Led Sled! Discs R 4 ME!
 
Join Date: Jan 2001
Location: Toms River, NJ, USA (Transplanted Hoosier)
Posts: 7,327
|
Take the 6 digit number b454rat listed above and run them on this site..
http://www.drivetrainsuperstores.com/ It will tell what year and trucks they came in |
|
|
|
|
06-28-2004, 10:37 AM
|
#6 |
|
user # 2756
Join Date: Jun 2001
Location: Chesapeake, Virginia
Posts: 4,612
|
Do you just need rotors/calipers and pads? If yes, just tell them you need parts for 73 3/4 ton 4wd chevy. The rotors/calipers are the same. The ones on my 71 would work. There is a difference between the 3/4 ton 10 bolt and 3/4 ton dana 44 calipers (the 10 bolt has a metric fitting).
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm 
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
