shocks and springs?????? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

alpha_male0203 · 07-26-2004, 04:25 PM

i jsut got a new engine and that is not helping the suspention that i had it has been shot for a bit but is that all that i need in the front and the rear for an 81 gmc fleepside sierra grande let me know on that thanks everyone in an advance just that what do i need for the suspention jsut shocks and springs thanks

alpha_male0203 · 07-26-2004, 04:27 PM

and can i get shocks and springs for lowering it also then on the spot or so i need anything else for lowerting it let me knwo thanks you

alpha_male0203 · 07-27-2004, 02:51 AM

can anyone help me here i am new to this stuff and dont know alot thanks

smokekiki · 07-27-2004, 02:12 PM

You will need to check the condition of Your balljoints.Jack up the frontwheel and see if there is any play.You can put 2" drop springs in the front without a problem.Anymore than that i would go with drop spindles and springs.Back springs are probaly allright.Can use drop blocks to lower.A good set of shocks will make a big difference in handling.

alpha_male0203 · 07-27-2004, 03:46 PM

i have two shocks in front and two shocks and there all shot and then 2 shocks in the back no springs in back and then jsut get two inch lowering springs in front and what about the back thanks

07-26-2004, 04:25 PM	#1
alpha_male0203 95 extended cab sportside Join Date: Jul 2004 Location: Clinton, Iowa western. Posts: 895	shocks and springs?????? i jsut got a new engine and that is not helping the suspention that i had it has been shot for a bit but is that all that i need in the front and the rear for an 81 gmc fleepside sierra grande let me know on that thanks everyone in an advance just that what do i need for the suspention jsut shocks and springs thanks __________________ 95 Chevy k 1500 00 Chevy Silverado 1500 07 cobalt Old ladies car]

07-26-2004, 04:27 PM	#2
alpha_male0203 95 extended cab sportside Join Date: Jul 2004 Location: Clinton, Iowa western. Posts: 895	and can i get shocks and springs for lowering it also then on the spot or so i need anything else for lowerting it let me knwo thanks you __________________ 95 Chevy k 1500 00 Chevy Silverado 1500 07 cobalt Old ladies car]

07-27-2004, 02:51 AM	#3
alpha_male0203 95 extended cab sportside Join Date: Jul 2004 Location: Clinton, Iowa western. Posts: 895	can anyone help me here i am new to this stuff and dont know alot thanks __________________ 95 Chevy k 1500 00 Chevy Silverado 1500 07 cobalt Old ladies car]

07-27-2004, 02:12 PM	#4
smokekiki Mike Join Date: Jan 2003 Location: west chester pa Posts: 2,473	You will need to check the condition of Your balljoints.Jack up the frontwheel and see if there is any play.You can put 2" drop springs in the front without a problem.Anymore than that i would go with drop spindles and springs.Back springs are probaly allright.Can use drop blocks to lower.A good set of shocks will make a big difference in handling. __________________ 70'c/10, 71 suburban4x4 402bb, 72suburban 4/6 drop, 72k/5 4x4 blazer 4" lift 35 tires

07-27-2004, 03:46 PM	#5
alpha_male0203 95 extended cab sportside Join Date: Jul 2004 Location: Clinton, Iowa western. Posts: 895	i have two shocks in front and two shocks and there all shot and then 2 shocks in the back no springs in back and then jsut get two inch lowering springs in front and what about the back thanks __________________ 95 Chevy k 1500 00 Chevy Silverado 1500 07 cobalt Old ladies car]



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.