|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-23-2004, 03:58 PM
|
#1 |
|
67 is sold
Join Date: Apr 2001
Location: Troy, Michigan
Posts: 6,733
|
Front Cross member swap - bolts?
Very soon, I plan to swap over a 5 bolt disc front crossmember assembly to my '67 SWB frame.
Does anyone know the size and grade of the bolts/nuts required to fasten the crossmember to the frame rails on this setup? Thanks 
|
|
|
|
08-24-2004, 07:31 AM
|
#2 |
|
67 is sold
Join Date: Apr 2001
Location: Troy, Michigan
Posts: 6,733
|
anyone?
|
|
|
|
|
08-24-2004, 08:20 AM
|
#3 |
|
Registered User
Join Date: Apr 2004
Location: arkieland
Posts: 1,070
|
I used grade 8, 7/16" about 1 1/4 inch long if memory serves me. Some later trucks had a larger bolt vertically, 1/2 inch on those. Brian
|
|
|
|
|
08-24-2004, 08:23 AM
|
#4 |
|
67 is sold
Join Date: Apr 2001
Location: Troy, Michigan
Posts: 6,733
|
Thanks Brian.
I am using a 1972 1/2 ton Crossmember |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
