|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-29-2004, 08:57 PM
|
#1 |
|
Registered User
Join Date: Feb 2004
Location: Penelope, Texas
Posts: 393
|
I need help with the Accelerator Cable
Here is what my problem is this weekend I will be swaping out cabs. My truck is a 70 and has an accelerator rod the cab that I will be using is a 71 and has a cable. I don't know how it hooks up to the carb and where the cable bracket bolts to. It has a 350 with a holly intake and holly carb if this helps. Photos would help alot.
Thanks Jason |
|
|
|
08-29-2004, 10:18 PM
|
#2 |
|
Senior Member
Join Date: Nov 2003
Location: Brookings, SD
Posts: 10,497
|
I just took my carb off so I don't have a picture, but my bracket was bolted to the back driver's side corner of the carb. The carb mounting bolt also held the bracket.
__________________
Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs. |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
