WTB-Carb to TBI adapter - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**crossy** · 09-03-2004, 11:38 AM

I was hoping someone here had one of the later TBI intakes that the adapter was bolted onto the top of. I don't want a whole intake just the adapter. the early ones were one piece but I have seen later ones that bolt on.I actually need to use it the other way because I have the need here to test TBI type engines. It can be from any engine< lemmeknow, thanx , DAVE.

Mr. Big Block · 09-19-2004, 02:18 PM

yo man im not sure if its what you need but i just changed my 88 tbi 454 over to a carb, and i still have all the tbi stuff. its a three piece part. it has the injector housing,the throttle part, and then a spacer which is plumbed for cooling. if its what you need let me know, maybe i can help you out.

**crossy** · 09-19-2004, 09:04 PM

Quote:

Originally Posted by Mr. Big Block

yo man im not sure if its what you need but i just changed my 88 tbi 454 over to a carb, and i still have all the tbi stuff. its a three piece part. it has the injector housing,the throttle part, and then a spacer which is plumbed for cooling. if its what you need let me know, maybe i can help you out.

I could use that piece with the coolant line that was under your TBI ,but may also be interested in the TBI unit. email -DAVE all4trux@snip.net lemmeknow.

Mr. Big Block · 10-09-2004, 09:41 AM

yo man im sorry i didnt mean to disappear on you ive had major computer problems i have no email right now but if you get this you can call me @203-278-1809 ill gladly sell my tbi to you it has no injectors or any gaskets i was going to rebuild it but then i changed my plan halfway through and decieded to go with a carb the only thing i did not remove was the throttle if you need pics let me know and i use a friends comp to send them thanx

*1972C10* · 09-19-2004, 06:18 PM

I bet you could build one of out 3/8 plate and then mount it on a 1" spacer.

**crossy** · 10-09-2004, 07:46 PM

still need one. I'll call. DAVE

09-03-2004, 11:38 AM	#1
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	WTB-Carb to TBI adapter I was hoping someone here had one of the later TBI intakes that the adapter was bolted onto the top of. I don't want a whole intake just the adapter. the early ones were one piece but I have seen later ones that bolt on.I actually need to use it the other way because I have the need here to test TBI type engines. It can be from any engine< lemmeknow, thanx , DAVE. __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

10-09-2004, 09:41 AM	#4
Mr. Big Block Registered User Join Date: Aug 2004 Posts: 6	tbi spacer yo man im sorry i didnt mean to disappear on you ive had major computer problems i have no email right now but if you get this you can call me @203-278-1809 ill gladly sell my tbi to you it has no injectors or any gaskets i was going to rebuild it but then i changed my plan halfway through and decieded to go with a carb the only thing i did not remove was the throttle if you need pics let me know and i use a friends comp to send them thanx

10-09-2004, 07:46 PM	#6
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	still need one. I'll call. DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

09-19-2004, 02:18 PM	#2
Mr. Big Block Registered User Join Date: Aug 2004 Posts: 6	yo man im not sure if its what you need but i just changed my 88 tbi 454 over to a carb, and i still have all the tbi stuff. its a three piece part. it has the injector housing,the throttle part, and then a spacer which is plumbed for cooling. if its what you need let me know, maybe i can help you out.

09-19-2004, 06:18 PM	#5
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	I bet you could build one of out 3/8 plate and then mount it on a 1" spacer.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.