parting 72 blazer - The 1947 - Present Chevrolet & GMC Truck Message Board Network

meathead95 · 09-11-2004, 08:36 PM

luvs old one if you need something pm me and ill see if i got it i personally think the windshield frame is good and the rest of the tub is sh!t, the frame is sh!t also, it has some good things though it is totally stripped now i also have the stock leafspirngs and new front shocks and new driveshafts off of it f/s
thanks
keith

3chevys · 09-11-2004, 11:18 PM

looking for hatch handle parts. mainly thehandle and the oval piece that slides over the handle shaft

meathead95 · 09-12-2004, 04:04 PM

sorry no hatch but i do have a really nice double wall top for sale

meathead95 · 09-12-2004, 04:13 PM

it does appear to have a 2" lift which is for sale springs in front and blocks in back

RED72blazer · 09-12-2004, 05:29 PM

does it have the brackets for the rear cargo panels?

LUV2XCLR8 · 09-12-2004, 07:55 PM

Yes It Does, But I Think Keith Was Going To Keep Those.

blazerslave · 09-13-2004, 01:43 AM

How about the shifter knob on the transfer case?

Got it?

Thanks!

meathead95 · 09-13-2004, 02:41 PM

yeah i am keeping the cargo panel brackets. it even had the chrome trim for them :-)

the transfer case is not correct so the knob isnt either it looks like something from like an 88ish to a 94 or so to me

Chevy Muscle · 09-13-2004, 02:44 PM

Meathead95, You have a PM.

armando low · 09-13-2004, 02:55 PM

how much for the window frame for blazer

meathead95 · 09-14-2004, 02:09 PM

armando low you are 3rd in line for it ill let you know

kw · 09-15-2004, 06:38 AM

Anything left of the floor pans?

meathead95 · 09-15-2004, 03:07 PM

what are you looking for

mikeperez22 · 09-15-2004, 11:29 PM

Sent PM

six point 0 · 09-22-2004, 05:40 PM

how about the title/vin plate(s)?

kw · 09-22-2004, 07:54 PM

Quote:

Originally Posted by meathead95

what are you looking for

Drivers side, humped up area where seat bolts in. Mine's a little too far gone to get with patch panels alone. See pic below, hopefully that'll explain it better than I can.

meathead95 · 09-22-2004, 09:24 PM

yeah ive got a good hump where the front of the seat bolts to do you need both sides?

kw · 09-23-2004, 02:23 AM

Passenger side is a lot better than drivers.

I don't know what shape the rest of your pans are, but mine are basically shot from the seat back on the drivers side. Whatever you have I am interested in.

Shoot me a PM

Thanks,

Kurt

meathead95 · 09-23-2004, 08:45 PM

i bought the whole front section out of a blazer from another member all i have left is the hump where the front seats go to you asked about and about the front half of where the console sits and the perimeter of the bolt in hump. the floors that where in lluvs blazer where totally crap.

kw · 09-23-2004, 09:07 PM

Hey, that's exactly what I need. What are you looking at for a price?

Thanks,

Kurt

meathead95 · 09-23-2004, 09:27 PM

how much of it do you need?

kw · 09-24-2004, 02:18 AM

Keith,

I got home this afternoon and took a look. I'd like to get both sides, each side including the captured nuts for the seats. I can build a jig that way to make sure I can get the seats located properly.

Passenger side, while better than drivers, is still showing some severe rusting. Truck was in the Nags Head area for 5 years and the salt got to the floor pans. I don't think there will be a lot left after blasting.

Center section by the console is good, I won't need that piece.

So, if you are willing to part with both the humped up areas, that would be great. If there's good metal beyond the humped area, I guess if you could cut about an inch beyond where you'd think the tangent point was on either side, front and back of the hump. That should give me enough to work with.

Let me know a price and an estimate for shipping and I can get you some money.

Thanks,

Kurt

meathead95 · 09-24-2004, 12:55 PM

leaving for illinois as we speak ill be back monday and will take care of it then. email me your address so i can respond with a pic of what i have my email is meathead95@hotmail.com please include your address also so i can get a shipping quote
later
keith

teamharvey · 09-24-2004, 01:44 PM

Front seat belts, stereing gear box, sterring colum handles and levers, parking brake hardware, both side window regulators ?

meathead95 · 09-28-2004, 01:39 PM

kw-sent you pics

team harvey-window regulators where junk, seat belts where crap, i kept the steering box, handles and levers are in the junk yard, all the parking brake stuff was gone.

09-11-2004, 08:36 PM	#1
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	parting 72 blazer luvs old one if you need something pm me and ill see if i got it i personally think the windshield frame is good and the rest of the tub is sh!t, the frame is sh!t also, it has some good things though it is totally stripped now i also have the stock leafspirngs and new front shocks and new driveshafts off of it f/s thanks keith __________________ 72 2wd blazer 72 swb 4x4

09-12-2004, 04:04 PM	#3
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	sorry no hatch but i do have a really nice double wall top for sale __________________ 72 2wd blazer 72 swb 4x4

09-12-2004, 04:13 PM	#4
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	it does appear to have a 2" lift which is for sale springs in front and blocks in back __________________ 72 2wd blazer 72 swb 4x4

09-12-2004, 05:29 PM	#5
RED72blazer urban fourwheelin Join Date: Aug 2002 Location: Seattle Posts: 1,007	does it have the brackets for the rear cargo panels? __________________ 1972 K5 Blazer with Cummins 4BT, NV4500 swap in the parts gathering stage.

09-12-2004, 07:55 PM	#6
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Yes It Does, But I Think Keith Was Going To Keep Those. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

09-11-2004, 11:18 PM	#2
3chevys Junior Member Join Date: Jul 2004 Location: Bend, Oregon Posts: 37	looking for hatch handle parts. mainly thehandle and the oval piece that slides over the handle shaft

09-13-2004, 01:43 AM	#7
blazerslave Registered User Join Date: Nov 2000 Location: Valencia, CA Posts: 96	How about the shifter knob on the transfer case? Got it? Thanks! __________________ "If you choose not to decide . . . you still have made a choice."

09-13-2004, 02:41 PM	#8
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	yeah i am keeping the cargo panel brackets. it even had the chrome trim for them :-) the transfer case is not correct so the knob isnt either it looks like something from like an 88ish to a 94 or so to me __________________ 72 2wd blazer 72 swb 4x4

09-13-2004, 02:44 PM	#9
Chevy Muscle < 69 Blazer Join Date: Mar 2004 Location: Nevada, TX Posts: 292	Meathead95, You have a PM.

09-13-2004, 02:55 PM	#10
armando low Registered User Join Date: May 2004 Location: houston tx. Posts: 71	how much for the window frame for blazer __________________ 2011 dodge 3500 megacab 4x4 1987 silverado swb 2000 gmc sierra stepside 5.3 1972 2wb blazer project

09-14-2004, 02:09 PM	#11
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	armando low you are 3rd in line for it ill let you know __________________ 72 2wd blazer 72 swb 4x4

09-15-2004, 06:38 AM	#12
kw Registered User Join Date: Jul 2000 Location: Owings, MD Posts: 119	Anything left of the floor pans?

09-15-2004, 03:07 PM	#13
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	what are you looking for __________________ 72 2wd blazer 72 swb 4x4

09-15-2004, 11:29 PM	#14
mikeperez22 Registered User Join Date: Jun 2004 Posts: 31	Sent PM Sent PM

09-22-2004, 05:40 PM	#15
six point 0 Registered User Join Date: Aug 2004 Posts: 13	how about the title/vin plate(s)?



Register or Log In To remove these advertisements.

09-22-2004, 09:24 PM	#17
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	yeah ive got a good hump where the front of the seat bolts to do you need both sides? __________________ 72 2wd blazer 72 swb 4x4

09-23-2004, 02:23 AM	#18
kw Registered User Join Date: Jul 2000 Location: Owings, MD Posts: 119	Pans Passenger side is a lot better than drivers. I don't know what shape the rest of your pans are, but mine are basically shot from the seat back on the drivers side. Whatever you have I am interested in. Shoot me a PM Thanks, Kurt

09-23-2004, 08:45 PM	#19
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	i bought the whole front section out of a blazer from another member all i have left is the hump where the front seats go to you asked about and about the front half of where the console sits and the perimeter of the bolt in hump. the floors that where in lluvs blazer where totally crap. __________________ 72 2wd blazer 72 swb 4x4

09-23-2004, 09:07 PM	#20
kw Registered User Join Date: Jul 2000 Location: Owings, MD Posts: 119	Yup Hey, that's exactly what I need. What are you looking at for a price? Thanks, Kurt

09-23-2004, 09:27 PM	#21
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	how much of it do you need? __________________ 72 2wd blazer 72 swb 4x4

09-24-2004, 02:18 AM	#22
kw Registered User Join Date: Jul 2000 Location: Owings, MD Posts: 119	How much Keith, I got home this afternoon and took a look. I'd like to get both sides, each side including the captured nuts for the seats. I can build a jig that way to make sure I can get the seats located properly. Passenger side, while better than drivers, is still showing some severe rusting. Truck was in the Nags Head area for 5 years and the salt got to the floor pans. I don't think there will be a lot left after blasting. Center section by the console is good, I won't need that piece. So, if you are willing to part with both the humped up areas, that would be great. If there's good metal beyond the humped area, I guess if you could cut about an inch beyond where you'd think the tangent point was on either side, front and back of the hump. That should give me enough to work with. Let me know a price and an estimate for shipping and I can get you some money. Thanks, Kurt

09-24-2004, 12:55 PM	#23
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	leaving for illinois as we speak ill be back monday and will take care of it then. email me your address so i can respond with a pic of what i have my email is meathead95@hotmail.com please include your address also so i can get a shipping quote later keith __________________ 72 2wd blazer 72 swb 4x4

09-24-2004, 01:44 PM	#24
teamharvey Registered User Join Date: Jul 2004 Location: Turlock, Ca Posts: 578	Front seat belts, stereing gear box, sterring colum handles and levers, parking brake hardware, both side window regulators ?

09-28-2004, 01:39 PM	#25
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	kw-sent you pics team harvey-window regulators where junk, seat belts where crap, i kept the steering box, handles and levers are in the junk yard, all the parking brake stuff was gone. __________________ 72 2wd blazer 72 swb 4x4

Register or Log In To remove these advertisements.