Aftermarket cruise, $40 plus shipping - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**71swb4x4** · 09-22-2004, 02:27 AM

I have an aftermarket cruise setup that I pulled from a 71 pickup. The 5 wires between the interior pieces (switch and relay) and the speed box are cut, but they are color coded and just need to be spliced. It has 3 additional wires, I assume 1 for ground, 1 for power, not sure what the 3rd is for. It needs a vaccum supply, and then a vacuum line run to the throttle control. It has a short speedo cable that goes to your speedo. The cable that used to go to your speedo hooks up to the speed box, which will control the amount of vacuum that goes to the throttle control.
I do not know if this works, I pulled it out of a non-running truck. I think it's al there, except for the vacuum lines, they were pretty crusty.
It was made by Dana.
I can email you pictures.
Shawn

Inspector722 · 09-22-2004, 02:45 AM

Send pics to inspector722@aol.com

**71swb4x4** · 09-22-2004, 03:07 AM

Pictures

*Robo_bot* · 09-22-2004, 03:13 AM

ill take the cruise switch if no one wants the rest of it and the shorter speedo cable

**71swb4x4** · 09-22-2004, 03:16 AM

But it all, sell what you don't want

I will give it 2 days, if no one wants it all I may seperate.

*Robo_bot* · 09-22-2004, 03:17 AM

lol i c well i just bought a full one in good shape but im not sure if it has a switch and a good short speedo cable so thats y lol

let me know if u do decide to

thanx

Nick

Inspector722 · 09-22-2004, 03:36 AM

Email sent.

da-burb · 09-22-2004, 08:05 PM

to help someone out, I am 99% sure I have the installation manual for this set up. I can make copies or scans if you need them.

67ChevyC10Stepside · 09-23-2004, 12:46 AM

im pretty interested in this...how does it mount to the intake or whatever to control the carb? how chinsy does it look?

**71swb4x4** · 09-23-2004, 01:23 AM

The round part mounts to the firewall behind the engine (usually) and it has a chain/linkage that goes from it to the carb. The round thing is actually like a bag, and when it wants to accelerate the speed control box pulls the throttle by sucking in the bag with vacuum, which pulls on the chain/linkage.
The speed control box was mounted to the driver's side inner fender.

Inspector722 · 09-28-2004, 11:05 AM

PM sent.

09-22-2004, 02:27 AM	#1
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,499	Aftermarket cruise, $40 plus shipping I have an aftermarket cruise setup that I pulled from a 71 pickup. The 5 wires between the interior pieces (switch and relay) and the speed box are cut, but they are color coded and just need to be spliced. It has 3 additional wires, I assume 1 for ground, 1 for power, not sure what the 3rd is for. It needs a vaccum supply, and then a vacuum line run to the throttle control. It has a short speedo cable that goes to your speedo. The cable that used to go to your speedo hooks up to the speed box, which will control the amount of vacuum that goes to the throttle control. I do not know if this works, I pulled it out of a non-running truck. I think it's al there, except for the vacuum lines, they were pretty crusty. It was made by Dana. I can email you pictures. Shawn __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

09-22-2004, 02:45 AM	#2
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	Send pics to inspector722@aol.com __________________ Email address- inspector722@aol.com Zip Code- 77611 Shipping- DHL & USPS Working on: 67, large back glass, 307 V8, 200 4R, 3.73 rearend, Short Stepside Bed

09-22-2004, 03:07 AM	#3
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,499	Pictures __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

09-22-2004, 03:36 AM	#7
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	Email sent. __________________ Email address- inspector722@aol.com Zip Code- 77611 Shipping- DHL & USPS Working on: 67, large back glass, 307 V8, 200 4R, 3.73 rearend, Short Stepside Bed

09-22-2004, 08:05 PM	#8
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	to help someone out, I am 99% sure I have the installation manual for this set up. I can make copies or scans if you need them. __________________ Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087

09-22-2004, 03:13 AM	#4
Robo_bot Account Suspended Join Date: Feb 2004 Location: Kelowna BC Canada Posts: 481	ill take the cruise switch if no one wants the rest of it and the shorter speedo cable

09-22-2004, 03:16 AM	#5
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,499	But it all, sell what you don't want I will give it 2 days, if no one wants it all I may seperate.

09-22-2004, 03:17 AM	#6
Robo_bot Account Suspended Join Date: Feb 2004 Location: Kelowna BC Canada Posts: 481	lol i c well i just bought a full one in good shape but im not sure if it has a switch and a good short speedo cable so thats y lol let me know if u do decide to thanx Nick

09-23-2004, 12:46 AM	#9
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	im pretty interested in this...how does it mount to the intake or whatever to control the carb? how chinsy does it look? __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

09-23-2004, 01:23 AM	#10
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,499	The round part mounts to the firewall behind the engine (usually) and it has a chain/linkage that goes from it to the carb. The round thing is actually like a bag, and when it wants to accelerate the speed control box pulls the throttle by sucking in the bag with vacuum, which pulls on the chain/linkage. The speed control box was mounted to the driver's side inner fender. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

09-28-2004, 11:05 AM	#11
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	PM sent. __________________ Email address- inspector722@aol.com Zip Code- 77611 Shipping- DHL & USPS Working on: 67, large back glass, 307 V8, 200 4R, 3.73 rearend, Short Stepside Bed



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.