wtb 73-87 lwb 4x4 rolling frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

griswold510 · 10-08-2004, 07:21 PM

looking to buy a 73-87 lwb 4x4 frame in or around GA. im planning on converting my c10 into a 4x4.

clarkjw24 · 10-08-2004, 10:22 PM

May have one in a couple of weeks. What all are you gonna need on the frame? I'm in SC

griswold510 · 10-08-2004, 11:00 PM

well ive got a 76 c10 right now. good cab, engine, etc. basically all ill need are the 4x4 components. everything else ill strip from my c10. how much would you be selling for? also how far from atl are you?

clarkjw24 · 10-08-2004, 11:16 PM

So your talking, frame, springs/alxes/tires/rims, trans/tcase, both drive shafts, and steering box.

Hopefully by next weekend I will have it here at the house. I'm buying it for the f/i wiring harness but its a complete 87 lwb 4wd truck. I was going to part the rest out however would rather get rid of the whole thing. Let me get it here and make sure that everything works right on it and I'll get back with you. I like to stand behind everything I sell. Then we can talk price. Also it less than 5 hours to Atl. Up I20 to Camden,SC then 30 mins away. I could deliver for a small fee of couse.

griswold510 · 10-08-2004, 11:30 PM

alright sounds good. how much you paying for the whole thing? trying to guage how much im gonna be spending in the next couple weeks.

griswold510 · 10-10-2004, 06:05 PM

anyone else around got anything to help me out??

mkundo · 10-10-2004, 07:37 PM

I'm in Ca. I have a complete front (D44)and rear (12 bolt)with springs and drive shafts. $250.00 for all.
Thanks

griswold510 · 10-10-2004, 07:43 PM

damn....wish ya werent so far away

*bisquik65* · 10-10-2004, 08:18 PM

Just parted a 79 lwb 4x4 I have both rears Dana44 up front and 12 bolt rear havenot checked ratio yet but will ,both driveshafts for $200. And 4 stock steel wheels The frame was not real bad and i should have check on here 1st but i didn't and its on my truck along with 2 more frames for scrap. I am in western n.c. 1 hour north of asheville. Pm me . Erick

griswold510 · 10-16-2004, 04:48 AM

ttt

clarkjw24 · 10-17-2004, 11:30 AM

Got mine home everthing seems good. Its an 87 4wd lwb rolling chassis with a 700r4/np208 combo. Both driveshafts, set of 10 bolts (3.08) good steering box, set of rallies minus rings and caps. $750 you come get it. I've got lots of 4wd parts so ask for anything else you may need. Like I said before I can also deliver it for a fee. Let me know if your interested.

clarkjw24 · 10-18-2004, 10:54 AM

???

clarkjw24 · 10-19-2004, 08:55 PM

Keeping it at the top.

If your not interested just let me know. I've got several people in line behind you. I told them you had first dibs.

griswold510 · 10-22-2004, 12:56 AM

i dont have the 750 right now... just looking for something a lil cheaper i guess thtas more bare bones cuz i got a good body and all. but thanks for all your help though

10-08-2004, 07:21 PM	#1
griswold510 Registered User Join Date: Sep 2004 Location: kennesaw GA Posts: 73	wtb 73-87 lwb 4x4 rolling frame looking to buy a 73-87 lwb 4x4 frame in or around GA. im planning on converting my c10 into a 4x4.

10-10-2004, 07:37 PM	#7
mkundo Registered User Join Date: Feb 2004 Location: Ca. Posts: 366	Chassie I'm in Ca. I have a complete front (D44)and rear (12 bolt)with springs and drive shafts. $250.00 for all. Thanks

10-10-2004, 08:18 PM	#9
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	rears Just parted a 79 lwb 4x4 I have both rears Dana44 up front and 12 bolt rear havenot checked ratio yet but will ,both driveshafts for $200. And 4 stock steel wheels The frame was not real bad and i should have check on here 1st but i didn't and its on my truck along with 2 more frames for scrap. I am in western n.c. 1 hour north of asheville. Pm me . Erick

10-08-2004, 10:22 PM	#2
clarkjw24 I like cheese Join Date: Aug 2004 Location: McBee, SC Posts: 192	May have one in a couple of weeks. What all are you gonna need on the frame? I'm in SC

10-08-2004, 11:00 PM	#3
griswold510 Registered User Join Date: Sep 2004 Location: kennesaw GA Posts: 73	well ive got a 76 c10 right now. good cab, engine, etc. basically all ill need are the 4x4 components. everything else ill strip from my c10. how much would you be selling for? also how far from atl are you?

10-08-2004, 11:16 PM	#4
clarkjw24 I like cheese Join Date: Aug 2004 Location: McBee, SC Posts: 192	So your talking, frame, springs/alxes/tires/rims, trans/tcase, both drive shafts, and steering box. Hopefully by next weekend I will have it here at the house. I'm buying it for the f/i wiring harness but its a complete 87 lwb 4wd truck. I was going to part the rest out however would rather get rid of the whole thing. Let me get it here and make sure that everything works right on it and I'll get back with you. I like to stand behind everything I sell. Then we can talk price. Also it less than 5 hours to Atl. Up I20 to Camden,SC then 30 mins away. I could deliver for a small fee of couse.

10-08-2004, 11:30 PM	#5
griswold510 Registered User Join Date: Sep 2004 Location: kennesaw GA Posts: 73	alright sounds good. how much you paying for the whole thing? trying to guage how much im gonna be spending in the next couple weeks.

10-10-2004, 06:05 PM	#6
griswold510 Registered User Join Date: Sep 2004 Location: kennesaw GA Posts: 73	anyone else around got anything to help me out??

10-10-2004, 07:43 PM	#8
griswold510 Registered User Join Date: Sep 2004 Location: kennesaw GA Posts: 73	damn....wish ya werent so far away

10-16-2004, 04:48 AM	#10
griswold510 Registered User Join Date: Sep 2004 Location: kennesaw GA Posts: 73	ttt

10-17-2004, 11:30 AM	#11
clarkjw24 I like cheese Join Date: Aug 2004 Location: McBee, SC Posts: 192	Got mine home everthing seems good. Its an 87 4wd lwb rolling chassis with a 700r4/np208 combo. Both driveshafts, set of 10 bolts (3.08) good steering box, set of rallies minus rings and caps. $750 you come get it. I've got lots of 4wd parts so ask for anything else you may need. Like I said before I can also deliver it for a fee. Let me know if your interested.

10-18-2004, 10:54 AM	#12
clarkjw24 I like cheese Join Date: Aug 2004 Location: McBee, SC Posts: 192	???

10-19-2004, 08:55 PM	#13
clarkjw24 I like cheese Join Date: Aug 2004 Location: McBee, SC Posts: 192	Keeping it at the top. If your not interested just let me know. I've got several people in line behind you. I told them you had first dibs.



Register or Log In To remove these advertisements.

10-22-2004, 12:56 AM	#14
griswold510 Registered User Join Date: Sep 2004 Location: kennesaw GA Posts: 73	i dont have the 750 right now... just looking for something a lil cheaper i guess thtas more bare bones cuz i got a good body and all. but thanks for all your help though

Register or Log In To remove these advertisements.