Interior Parts Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Paso76GMCstepper · 10-13-2004, 03:22 AM

Ok everyone I have a question. I need to get replacement parts for my interior, I need headliner, dash, dash bezel and lens. kick panels, door panels, headliner trim, and seirra grande 15 badges.

My question what is everyones opinion on the best places to get these items. This is going in my 76 GMC Seirra Grande K15. 4x4 stepside.

Any and all comments are welcome Thanks In Advance

Tony

77gmcjoe · 10-13-2004, 05:51 AM

I bought most of that same stuff when I was redoing my '77 Sierra Grande. Your kick panels and headliner trim could probably be found in a salvage yard. Just get some interior paint and spray 'em to match. The chances of finding the other stuff at a salvage aren't to good though, at least not in any kind of shape. I had excellent luck dealing with LMC. www.lmctruck.com Their prices seem kind of high, but their service and quality was great!
Good luck, and be sure and post some pics!

Joe

Greenlee · 10-13-2004, 10:10 AM

I got my dash and bezel off e-bay. There are usually quite a few listed. Just be careful because some people list them as fitting 73-87 when there are a few differences between different years. I got my door panels from a company called Coverlay.

**76sierraclassic** · 10-13-2004, 10:32 AM

I bought some door panels on ebay, and see other interior parts such as headliner trim, kick panels, dash pads, etc out there all the time.

I haven't bought any interior parts from LMC, but I have bought other stuff from them with good experiences too.

Mike

Jonboy · 10-13-2004, 11:49 AM

The interior stuff from 73-87 will work. I put 85 or 86 plastic and headliner in my 73. I think there are some minor differences in the B-pillar trim from the early stuff, not 100% sure. I hit a pick a part up that has a few of these trucks, and got pretty much everything I need. Kinda had to mix and match, and dye everything. Used SEM spray dye, and it worked very well. The A pillar and windshield stuff is the same on Blazers and Suburbans as well.

wedgemon · 10-13-2004, 12:38 PM

Coverlay!!

I bookmarked them. Gotta love and outfit that makes Truck pices AND Fishing stuff!!

cliffsta · 10-13-2004, 04:32 PM

www.chevyduty.com - they have a lot of OE and reproduction stuff at sweet prices. Most if not all of my interior stuff is gonna come from them. Shipping is free at 300 bucks which is sweet.
HOWEVER: I did get my door panels, window crank handles, inner door handles, and a seat rebuild kit (that sucked) in addition to some other stuff from LMC. Their prices are just a tad high.

77gmcjoe · 10-13-2004, 05:17 PM

Forgor to mention, I've got a real fetish for woodgrain dashes and door panels.

I got a dash bezel overlay and door panel inserts from Cheyenne Pickup parts. They were OK to deal with, not as good as LMC, IMHO. It looks like this:

cliffsta · 10-13-2004, 05:49 PM

so 77GMCJoe, is that a plastic dash cap? If it is, then I am very hype about getting one come Xmas.

77gmcjoe · 10-13-2004, 07:59 PM

Cliffsta:
Actually, thats the original dash (with a coat of paint so it matched the rest of the interior). It's one of the remaining original interior parts. I was lucky in that the truck has been shedded or garaged since new. The dash is almost perfect.

Joe

10-13-2004, 03:22 AM	#1
Paso76GMCstepper Registered User Join Date: Jan 2004 Location: Paso Robles, CA Posts: 347	Interior Parts Question Ok everyone I have a question. I need to get replacement parts for my interior, I need headliner, dash, dash bezel and lens. kick panels, door panels, headliner trim, and seirra grande 15 badges. My question what is everyones opinion on the best places to get these items. This is going in my 76 GMC Seirra Grande K15. 4x4 stepside. Any and all comments are welcome Thanks In Advance Tony

10-13-2004, 05:51 AM	#2
77gmcjoe What do we get for $10? Join Date: Oct 2004 Location: Beardstown, Illinois Posts: 340	I bought most of that same stuff when I was redoing my '77 Sierra Grande. Your kick panels and headliner trim could probably be found in a salvage yard. Just get some interior paint and spray 'em to match. The chances of finding the other stuff at a salvage aren't to good though, at least not in any kind of shape. I had excellent luck dealing with LMC. www.lmctruck.com Their prices seem kind of high, but their service and quality was great! Good luck, and be sure and post some pics! Joe __________________ 1977 GMC K25 400/400/205 1989 Chevy Suburban R1500 350/700R4 (work beater) 1994 Chevy K3500 dually 454/4L80 1996 Corvette LT4 350/ZF 6 speed 2000 Bonneville SSEI Supercharged 3.8 Liter V6 1966 Chevelle 2 door sedan (Needs major repair )

10-13-2004, 11:49 AM	#5
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	The interior stuff from 73-87 will work. I put 85 or 86 plastic and headliner in my 73. I think there are some minor differences in the B-pillar trim from the early stuff, not 100% sure. I hit a pick a part up that has a few of these trucks, and got pretty much everything I need. Kinda had to mix and match, and dye everything. Used SEM spray dye, and it worked very well. The A pillar and windshield stuff is the same on Blazers and Suburbans as well. __________________ 1974 Jimmy- 5.3/4L80e/NP241

10-13-2004, 12:38 PM	#6
wedgemon Registered User Join Date: Jul 2004 Location: Spanish Springs, NV Posts: 1,171	Coverlay!! I bookmarked them. Gotta love and outfit that makes Truck pices AND Fishing stuff!! __________________ 2003 Silverado K1500 Z71 - Arrival Blue 1973 K5 Cheyenne Blazer 350/TH350/NP203 Kids Trucks:92 K1500 Blazer 5.7/700R4 4" lift. RETIRED: 1980 Scottsdale 4x4 Founding Member: "TILT WHEEL BELLY." Club

10-13-2004, 04:32 PM	#7
cliffsta Stepsides RULE Join Date: Jul 2004 Location: Pineville, LA Posts: 1,921	www.chevyduty.com - they have a lot of OE and reproduction stuff at sweet prices. Most if not all of my interior stuff is gonna come from them. Shipping is free at 300 bucks which is sweet. HOWEVER: I did get my door panels, window crank handles, inner door handles, and a seat rebuild kit (that sucked) in addition to some other stuff from LMC. Their prices are just a tad high. __________________ 1981 Chevy C10 Custom Deluxe Stepside 350 V8, headers, side exhausts, 3-speed auto SOLD 1980 Chevy C10 Custum Deluxe Stepside 305 V8, Edelbrock Performer Intake, Edelbrock 1406 600CFM 4-barrel, TH350C. Bent rod. SOLD 1984 GMC Sierra Classic Longbed 6.2L Diesel SOLD 2009 Kawasaki KLX-250S too many mods for this signature 1999 Honda Accord EX 4-cylinder, 17" Motegi Wheels 215/45/17 Sumitomo tires, Tein S-Tech lowering springs, KYB GR2 shocks, Acura TL 20mm rear swaybar, debadged, blackhoused headlights, Short-Ram Intake Cardomain of the Accord

10-13-2004, 10:10 AM	#3
Greenlee Registered User Join Date: Jun 2004 Location: El Lago, TX Posts: 1,668	I got my dash and bezel off e-bay. There are usually quite a few listed. Just be careful because some people list them as fitting 73-87 when there are a few differences between different years. I got my door panels from a company called Coverlay.

10-13-2004, 10:32 AM	#4
76sierraclassic Senior Member Join Date: Feb 2004 Location: White Hall, AR Posts: 316	I bought some door panels on ebay, and see other interior parts such as headliner trim, kick panels, dash pads, etc out there all the time. I haven't bought any interior parts from LMC, but I have bought other stuff from them with good experiences too. Mike

10-13-2004, 05:17 PM	#8
77gmcjoe What do we get for $10? Join Date: Oct 2004 Location: Beardstown, Illinois Posts: 340	Forgor to mention, I've got a real fetish for woodgrain dashes and door panels. I got a dash bezel overlay and door panel inserts from Cheyenne Pickup parts. They were OK to deal with, not as good as LMC, IMHO. It looks like this: Attached Images __________________ 1977 GMC K25 400/400/205 1989 Chevy Suburban R1500 350/700R4 (work beater) 1994 Chevy K3500 dually 454/4L80 1996 Corvette LT4 350/ZF 6 speed 2000 Bonneville SSEI Supercharged 3.8 Liter V6 1966 Chevelle 2 door sedan (Needs major repair ) Last edited by 77gmcjoe; 10-14-2004 at 06:24 AM.

10-13-2004, 05:49 PM	#9
cliffsta Stepsides RULE Join Date: Jul 2004 Location: Pineville, LA Posts: 1,921	so 77GMCJoe, is that a plastic dash cap? If it is, then I am very hype about getting one come Xmas. __________________ 1981 Chevy C10 Custom Deluxe Stepside 350 V8, headers, side exhausts, 3-speed auto SOLD 1980 Chevy C10 Custum Deluxe Stepside 305 V8, Edelbrock Performer Intake, Edelbrock 1406 600CFM 4-barrel, TH350C. Bent rod. SOLD 1984 GMC Sierra Classic Longbed 6.2L Diesel SOLD 2009 Kawasaki KLX-250S too many mods for this signature 1999 Honda Accord EX 4-cylinder, 17" Motegi Wheels 215/45/17 Sumitomo tires, Tein S-Tech lowering springs, KYB GR2 shocks, Acura TL 20mm rear swaybar, debadged, blackhoused headlights, Short-Ram Intake Cardomain of the Accord

10-13-2004, 07:59 PM	#10
77gmcjoe What do we get for $10? Join Date: Oct 2004 Location: Beardstown, Illinois Posts: 340	Cliffsta: Actually, thats the original dash (with a coat of paint so it matched the rest of the interior). It's one of the remaining original interior parts. I was lucky in that the truck has been shedded or garaged since new. The dash is almost perfect. Joe __________________ 1977 GMC K25 400/400/205 1989 Chevy Suburban R1500 350/700R4 (work beater) 1994 Chevy K3500 dually 454/4L80 1996 Corvette LT4 350/ZF 6 speed 2000 Bonneville SSEI Supercharged 3.8 Liter V6 1966 Chevelle 2 door sedan (Needs major repair )



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.