How hard would it be..... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bad_turbo · 10-23-2004, 03:28 PM

to put a blazer body on a late model Lincoln Navigator frame and drivetrain? Is it possible? I can get the interior too.

bouncytruck · 10-23-2004, 03:52 PM

Sounds like it would make a nice riding rig. I'm sure there would be a lot of fabrication required. Just by looking at the Navigator, I'd guess that the wheel base is a bit longer and a bit narrower. Do you know the measurements?

*Drop Top 71* · 10-23-2004, 04:00 PM

ughhh, yea and its a FORD! But seriusly, would you have a 4x4 or 2x4? Just wondering.

bad_turbo · 10-23-2004, 04:43 PM

I don't have the measurements, but I can get them. Yes, I do know its a FORD product, but I will be keeping the drivetrain all CHEVY, I don't think I want those headaches. Does anyone have the wheelbase measurements of a blazer?

blazerholic · 10-23-2004, 05:06 PM

104" wheelbase on a first gen.

bad_turbo · 10-24-2004, 11:47 AM

The wheelbase on the Navigator is 118 inches. I have to do some more measuring to be sure it won't be too much of a hassle.

bouncytruck · 10-24-2004, 01:59 PM

What about the track width? It would look awfully funny if the navigator chassis is a lot narrower than the Blazer body

bad_turbo · 10-24-2004, 02:55 PM

Exterior Dimensions (inches / millimeters)
Overall length 206 / 5,232
Overall width 80.2 / 2,037
Overall height 77.8 / 1,976
Wheelbase 118.8 / 3,018
Track width, front 67.0 / 1,701
Track width, rear 67.1 / 1,704
Ground clearance 8.6 / 218
Front overhang 38.7 / 984
Rear overhang 48.5 / 1,231
Angle of approach 21.9 degrees
Angle of departure 19.8 degrees
Ramp breakover angle 17.1 degrees

Does anyone know the blazer track width?

MAC67 · 10-28-2004, 04:33 PM

if i was planning ondoing something like that i would find a mid 90's blazer or gmc 2 door full size blazer and just set the body over onto it , that would be pretty neat , probably the same ride with less work , and more than likley better looks , imo

10-23-2004, 03:28 PM	#1
bad_turbo turbo enthusiast Join Date: Jan 2004 Location: carmichael, ca. Posts: 1,826	How hard would it be..... to put a blazer body on a late model Lincoln Navigator frame and drivetrain? Is it possible? I can get the interior too. __________________ "But daddy, I didn't hit them all with a stick"...what my 6 year old tells me when I pick him up from school early for fighting "

10-23-2004, 03:52 PM	#2
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Sounds like it would make a nice riding rig. I'm sure there would be a lot of fabrication required. Just by looking at the Navigator, I'd guess that the wheel base is a bit longer and a bit narrower. Do you know the measurements? __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

10-23-2004, 04:43 PM	#4
bad_turbo turbo enthusiast Join Date: Jan 2004 Location: carmichael, ca. Posts: 1,826	I don't have the measurements, but I can get them. Yes, I do know its a FORD product, but I will be keeping the drivetrain all CHEVY, I don't think I want those headaches. Does anyone have the wheelbase measurements of a blazer? __________________ "But daddy, I didn't hit them all with a stick"...what my 6 year old tells me when I pick him up from school early for fighting "

10-23-2004, 05:06 PM	#5
blazerholic I am a Gov't Mule Join Date: Aug 2003 Location: Latonia,Ky Posts: 276	104" wheelbase on a first gen. __________________ ...to die in the saddle must be my destiny, to ride this rockin' horse I must be crazy...

10-24-2004, 11:47 AM	#6
bad_turbo turbo enthusiast Join Date: Jan 2004 Location: carmichael, ca. Posts: 1,826	The wheelbase on the Navigator is 118 inches. I have to do some more measuring to be sure it won't be too much of a hassle. __________________ "But daddy, I didn't hit them all with a stick"...what my 6 year old tells me when I pick him up from school early for fighting "

10-23-2004, 04:00 PM	#3
Drop Top 71 I don't get the hint that banned means banned Join Date: Oct 2004 Location: Where the Bomb Dank Grows Posts: 43	ughhh, yea and its a FORD! But seriusly, would you have a 4x4 or 2x4? Just wondering.

10-24-2004, 01:59 PM	#7
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	What about the track width? It would look awfully funny if the navigator chassis is a lot narrower than the Blazer body __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

10-24-2004, 02:55 PM	#8
bad_turbo turbo enthusiast Join Date: Jan 2004 Location: carmichael, ca. Posts: 1,826	Exterior Dimensions (inches / millimeters) Overall length 206 / 5,232 Overall width 80.2 / 2,037 Overall height 77.8 / 1,976 Wheelbase 118.8 / 3,018 Track width, front 67.0 / 1,701 Track width, rear 67.1 / 1,704 Ground clearance 8.6 / 218 Front overhang 38.7 / 984 Rear overhang 48.5 / 1,231 Angle of approach 21.9 degrees Angle of departure 19.8 degrees Ramp breakover angle 17.1 degrees Does anyone know the blazer track width? __________________ "But daddy, I didn't hit them all with a stick"...what my 6 year old tells me when I pick him up from school early for fighting "

10-28-2004, 04:33 PM	#9
MAC67 " SHOW ME" Join Date: Jan 2003 Location: shelbyville illinois Posts: 2,624	if i was planning ondoing something like that i would find a mid 90's blazer or gmc 2 door full size blazer and just set the body over onto it , that would be pretty neat , probably the same ride with less work , and more than likley better looks , imo



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.