10-27-2004, 10:11 PM | #1 |
Got Big Block?
Join Date: Apr 2000
Location: West Texas
Posts: 1,510
|
'72 SWB Big Block F/S UPDATE WRONG PHONE #
'72 high optioned Big Block truck for sale (not mine). I can't verify whether or not it was an original big block truck (believe me, I tried) because the glovebox sticker is gone. It has a non original (obvisously) 454 and Turbo 400. No idea how many miles on the engine or tranny. Looks like an original non restored or more likely an older restoration on the interior. A/C worked good when I last drove the truck. 3.73 rear end. This is not my truck. I traded it to my cousin 2 1/2 years ago for the '68 Chevelle I currently have. He is in the military with a family and gas is killing him. I would buy it back in a heartbeat but when I mentioned it to my wife she hit the roof... Don't know the price but would figure more that 5k and less than 10k. Call Kory at 910-987-5666 (corrected!) The truck is located in the eastern US. Good luck.
__________________
"Experience is what you get when you didn't get what you wanted." Last edited by Purs; 11-08-2004 at 03:05 PM. Reason: wrong phone # |
10-27-2004, 11:43 PM | #2 |
FARMER/RANCHER
Join Date: Apr 2001
Location: SD
Posts: 597
|
that is a nice ride!!! I wish it had the original bb in it though.....
__________________
1972 chevy super, long box, 402 big block (2,000 miles on rebuild) 2wd tach, tilt, tool box on bedside, a/c, sliding rear window, orange and white. 1972 Chevy Blazer 2wd, tach, tilt, a/c, my first engine overhauling experience, Orange, with white top 2006 Gmc Sierra, XM, Z-71, dark blue, onstar, leather, rear entertainment (audio only) heated seats, (the wife loves that feature) upgraded tires immediately after purchase to Goodyear Wrangler AT/S (hate those rock throwers that come from the factory) BWC |
10-27-2004, 11:49 PM | #3 |
Got Big Block?
Join Date: Apr 2000
Location: West Texas
Posts: 1,510
|
I've got an original '72 402 that I'd make you a deal on, but I highly doubt it it would be the one that came out of this truck....
__________________
"Experience is what you get when you didn't get what you wanted." |
10-28-2004, 08:18 PM | #4 |
Got Big Block?
Join Date: Apr 2000
Location: West Texas
Posts: 1,510
|
bump.
__________________
"Experience is what you get when you didn't get what you wanted." |
10-29-2004, 12:52 PM | #5 |
Got Big Block?
Join Date: Apr 2000
Location: West Texas
Posts: 1,510
|
This is a nice truck. you can email me for more pics if you're interested. bpursley@esc14.net
__________________
"Experience is what you get when you didn't get what you wanted." |
10-29-2004, 03:41 PM | #6 |
Senior Member
Join Date: Dec 2003
Location: Pampa, Texas
Posts: 1,553
|
where in texas are you located?
__________________
https://www.ebay.com/itm/29620574751...mis&media=COPY |
10-29-2004, 03:53 PM | #7 |
Got Big Block?
Join Date: Apr 2000
Location: West Texas
Posts: 1,510
|
I'm near Abilene, but the truck is located in the Eastern Part of the US now. My cousin is in the military and got stationed somewhere out East. I'm just trying to help him out. It's possible he could drive the truck back next time he's on "leave."
__________________
"Experience is what you get when you didn't get what you wanted." |
10-30-2004, 02:26 AM | #8 |
idahospud
Join Date: Oct 2004
Location: Meridian,Idaho
Posts: 40
|
between 5 and 10 is a pretty big spread.Any closer idea what he would let it go for? 6,7,8,?
|
10-30-2004, 04:29 AM | #9 |
Got Big Block?
Join Date: Apr 2000
Location: West Texas
Posts: 1,510
|
Sorry, I can't put a price on other people's things. I was just trying to give people a ballpark idea what the truck would cost. The best thing would be to call him.
__________________
"Experience is what you get when you didn't get what you wanted." Last edited by Purs; 10-31-2004 at 06:11 PM. |
10-31-2004, 06:12 PM | #10 |
Got Big Block?
Join Date: Apr 2000
Location: West Texas
Posts: 1,510
|
ttt
__________________
"Experience is what you get when you didn't get what you wanted." |
11-06-2004, 10:05 PM | #11 |
Got Big Block?
Join Date: Apr 2000
Location: West Texas
Posts: 1,510
|
OK, talked to the owner tonight and he said 6k. I've got plenty of pics to send if anyone is interested. The number is in the first post.
__________________
"Experience is what you get when you didn't get what you wanted." Last edited by Purs; 11-07-2004 at 09:16 PM. |
11-06-2004, 10:52 PM | #12 |
Registered User
Join Date: Dec 2000
Location: Greeneville, TN
Posts: 3,097
|
You wouldn't know where out here in the east he is do you. Just wondering how close he might be to me if it was close enough for me to look at?
__________________
atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed |
11-06-2004, 11:24 PM | #13 |
Got Big Block?
Join Date: Apr 2000
Location: West Texas
Posts: 1,510
|
Is there a military base near Fayettville, NC? I'm pretty sure it's in that area.
__________________
"Experience is what you get when you didn't get what you wanted." |
11-07-2004, 12:50 AM | #14 |
Registered User
Join Date: Dec 2000
Location: Greeneville, TN
Posts: 3,097
|
That is probably close enough, could you send me some more of the pictures you have.
Thanks, Bill oldtruck@shentel.net
__________________
atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed |
11-07-2004, 07:24 AM | #15 |
Junior Member
Join Date: Dec 2001
Location: Indianapolis,IN
Posts: 127
|
memphis, tn is 901 area code
__________________
68 SWB all over the garage 86 LWB silverado 2006 silverado SS |
11-07-2004, 07:43 AM | #16 | |
The LuvShack Garage
Join Date: Jan 2004
Location: Maple Grove, TN (West Side)
Posts: 30,468
|
Quote:
__________________
Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T |
|
11-07-2004, 12:33 PM | #17 |
Registered User
Join Date: Oct 2004
Location: Houston, TX
Posts: 28
|
e-mail me pics please. thexman10@aol.com
When is he on leave next? Asking because I'm in Texas and would be curious if he'd drive it back down here. |
11-07-2004, 03:58 PM | #18 |
Its Magically Delicious
Join Date: Jan 2003
Location: oregon
Posts: 2,398
|
Is that a 2wd .. if so what tire size are you running ??
__________________
71 C10 LWB 350sbc -TH350 12 bolt 3.42 Posi Of all my favorite things to do, The utmost is to have a brew. My love grows for my foamy friend, with each thirst-quenching elbow bend. Beer so frosty, smooth, and cold it's paradise pure liquid gold. Yes beer means many things to me that's all for now cus I gotta pee. |
11-07-2004, 09:13 PM | #19 |
Got Big Block?
Join Date: Apr 2000
Location: West Texas
Posts: 1,510
|
255/70/15's all the way around.
__________________
"Experience is what you get when you didn't get what you wanted." |
11-08-2004, 03:00 PM | #20 |
Got Big Block?
Join Date: Apr 2000
Location: West Texas
Posts: 1,510
|
I apologize to anyone that tried to call Kory at the number listed above. It is the wrong number by one digit. Here is the correct number: 910-987-5666
__________________
"Experience is what you get when you didn't get what you wanted." |
01-05-2005, 07:05 PM | #21 |
Registered User
Join Date: Apr 2004
Location: Calgary, Alberta,Canada
Posts: 1,595
|
Did he sell this truck yet??
__________________
I know what your thinking.......I have ESPN. Sometimes it's easier to do things the hard way. Fesler Built 1968 Chevy C10....Must resist the urge to mess with it!! |
01-05-2005, 07:34 PM | #22 |
Got Big Block?
Join Date: Apr 2000
Location: West Texas
Posts: 1,510
|
It sold about a month ago... and it had a Dana 60, not a 12 bolt. Man I wish I had that truck back.
__________________
"Experience is what you get when you didn't get what you wanted." Last edited by Purs; 01-05-2005 at 07:55 PM. |
01-05-2005, 07:37 PM | #23 |
Registered User
Join Date: Apr 2004
Location: Calgary, Alberta,Canada
Posts: 1,595
|
Did he sell it to a board member?? Looks like it's a nice truck.
__________________
I know what your thinking.......I have ESPN. Sometimes it's easier to do things the hard way. Fesler Built 1968 Chevy C10....Must resist the urge to mess with it!! |
01-05-2005, 08:16 PM | #24 |
Registered User
Join Date: Mar 2002
Location: geneva al usa
Posts: 343
|
I cant believe that truck lasted that long on here since 10/28/04 and no one bought it till December that was a steal at $6000 with factory buckets and bigblock wish he still had it looked like I was headed to NC till I read next to last post. clean looking 72
__________________
bogey5 |
Bookmarks |
|
|