External parts off a SBC...mid 80's - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Street Sled · 11-12-2004, 03:34 PM

Couple sets of exhaust manifolds, couple of stock intake manifolds, spreadbore type, various brackets, pulleys, etc. Also have a very good bed/tailgate still on an 83. If you see anything you need, let me know, I'll get you a price. Southern Ohio......S/S

bluex · 11-13-2004, 07:28 AM

Got any pics or a price on the bed.

Thanks
Paul

Street Sled · 11-13-2004, 11:08 AM

Sorry, don't have the means for photos; if you're serious I can mail you some, P.M. me with address. Couple small pinholes over wheelwells..no other rust....Asking $400.00 8 Ft. with tailgate and chrome stepbumper........S/S

bluex · 11-15-2004, 01:33 AM

Sorry, I'm looking for a 6ft. I've got an 8 ft. in my yard I'd just about give away if someone would take it.

Thanks
Paul

67ChevyC10Stepside · 11-15-2004, 02:01 AM

i have access to a 6 ft from georgia almost perfect...only problem is he wants to find a short step before he sells the 6 ft...got any leads on a stepper? also we could probably use that 8fter

Street Sled · 11-15-2004, 11:09 AM

Don't know of a stepside right now.....Will deal on 8 footer; have trailer; will travel.....S/S

Street Sled · 11-17-2004, 12:33 AM

Hey 67......I saw a stepside pickup not far from here this evening....what are you interested in? I also have an option on an 85...no bed, but a near perfect front clip, doors, 4 speed OD, standard, toasted 4.3....Anyone???.....S/S

67ChevyC10Stepside · 11-17-2004, 12:36 AM

is the 85 2wd? i would be interested in the tranny.....also i need the hole stepside bed.

Street Sled · 11-17-2004, 01:04 AM

Yes it is a 2wd. As I said, it's a 4 soeed manual with 4th being OD. This is an 85 with the only thing missing being the bed. Fellow said it was perfect and he got talked out of it. (WAAAHH) HE won't part out the rest, has to go complete. Not sure what model the stepper is, but it's in the 73-87 range. These are 2 different trucks. I will check in the next day or two if it can be had, whole or in parts.....S/S

67ChevyC10Stepside · 11-17-2004, 01:13 AM

ok well i would maybe be interested in the tranny...and the stepside bed...if i get the stepside bed we can sell the short fleet we have.

Street Sled · 11-17-2004, 01:17 AM

O.K...I'll do some investigation..I don't really know what they are worth.....S/S

junkyardpartseeker · 11-17-2004, 10:55 AM

Interested in the exhaust manifolds if they do not have the provisions for the air holes.
Mount over the spark plugs.
Tommy

Street Sled · 11-17-2004, 12:26 PM

Quote:

Originally Posted by junkyardpartseeker

Interested in the exhaust manifolds if they do not have the provisions for the air holes.
Mount over the spark plugs.
Tommy

Tommy...Almost sure they don't...I'll check an post later....Thanks..S/S

Street Sled · 11-17-2004, 06:36 PM

67 C10....I have a 74 stepside complete....Check the post, Parting out....

Destructo · 11-17-2004, 08:03 PM

Quote:

Originally Posted by junkyardpartseeker

Interested in the exhaust manifolds if they do not have the provisions for the air holes.
Mount over the spark plugs.
Tommy

I have a set of 305 manifolds with no AIR provision if he doesn't have what you need.

Also, to the original poster, How much for all the accessory brackets? I mainly just need a mid 80s power steering pump bracket and pulley.

11-12-2004, 03:34 PM	#1
Street Sled Registered User Join Date: Oct 2003 Location: Ohio Posts: 146	External parts off a SBC...mid 80's Couple sets of exhaust manifolds, couple of stock intake manifolds, spreadbore type, various brackets, pulleys, etc. Also have a very good bed/tailgate still on an 83. If you see anything you need, let me know, I'll get you a price. Southern Ohio......S/S

11-13-2004, 07:28 AM	#2
bluex Registered User Join Date: Jun 2004 Location: Spartanburg, SC Posts: 1,963	Got any pics or a price on the bed. Thanks Paul __________________ Paul '78 GMC Serria 15 Heavy Half. 361/NV3500/3.73. Former LWB NV3500 swap Trailing arm swap '98 ECSB Z71 daily driver -traded '03 burb. Family cruiser http://upstategmtrucks.com/

11-13-2004, 11:08 AM	#3
Street Sled Registered User Join Date: Oct 2003 Location: Ohio Posts: 146	Sorry, don't have the means for photos; if you're serious I can mail you some, P.M. me with address. Couple small pinholes over wheelwells..no other rust....Asking $400.00 8 Ft. with tailgate and chrome stepbumper........S/S Last edited by Street Sled; 11-13-2004 at 11:17 AM.

11-15-2004, 01:33 AM	#4
bluex Registered User Join Date: Jun 2004 Location: Spartanburg, SC Posts: 1,963	Sorry, I'm looking for a 6ft. I've got an 8 ft. in my yard I'd just about give away if someone would take it. Thanks Paul __________________ Paul '78 GMC Serria 15 Heavy Half. 361/NV3500/3.73. Former LWB NV3500 swap Trailing arm swap '98 ECSB Z71 daily driver -traded '03 burb. Family cruiser http://upstategmtrucks.com/

11-15-2004, 02:01 AM	#5
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	i have access to a 6 ft from georgia almost perfect...only problem is he wants to find a short step before he sells the 6 ft...got any leads on a stepper? also we could probably use that 8fter __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

11-15-2004, 11:09 AM	#6
Street Sled Registered User Join Date: Oct 2003 Location: Ohio Posts: 146	Don't know of a stepside right now.....Will deal on 8 footer; have trailer; will travel.....S/S

11-17-2004, 12:33 AM	#7
Street Sled Registered User Join Date: Oct 2003 Location: Ohio Posts: 146	Hey 67......I saw a stepside pickup not far from here this evening....what are you interested in? I also have an option on an 85...no bed, but a near perfect front clip, doors, 4 speed OD, standard, toasted 4.3....Anyone???.....S/S

11-17-2004, 12:36 AM	#8
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	is the 85 2wd? i would be interested in the tranny.....also i need the hole stepside bed. __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

11-17-2004, 01:04 AM	#9
Street Sled Registered User Join Date: Oct 2003 Location: Ohio Posts: 146	Yes it is a 2wd. As I said, it's a 4 soeed manual with 4th being OD. This is an 85 with the only thing missing being the bed. Fellow said it was perfect and he got talked out of it. (WAAAHH) HE won't part out the rest, has to go complete. Not sure what model the stepper is, but it's in the 73-87 range. These are 2 different trucks. I will check in the next day or two if it can be had, whole or in parts.....S/S

11-17-2004, 01:13 AM	#10
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	ok well i would maybe be interested in the tranny...and the stepside bed...if i get the stepside bed we can sell the short fleet we have. __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

11-17-2004, 01:17 AM	#11
Street Sled Registered User Join Date: Oct 2003 Location: Ohio Posts: 146	O.K...I'll do some investigation..I don't really know what they are worth.....S/S

11-17-2004, 10:55 AM	#12
junkyardpartseeker Registered User Join Date: Mar 2003 Location: Mabelvale, AR Posts: 695	Interested in the exhaust manifolds if they do not have the provisions for the air holes. Mount over the spark plugs. Tommy __________________ junkyardpartseeker@sbcglobal.net

11-17-2004, 06:36 PM	#14
Street Sled Registered User Join Date: Oct 2003 Location: Ohio Posts: 146	67 C10....I have a 74 stepside complete....Check the post, Parting out....



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.