What can I use for seatbelts? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HeavyD · 12-01-2004, 02:47 AM

Hi. I want seatbelts in my 70 GMC that have retractable shoulder harnesses. What will work well in my truck with the least amount of fabricating? I see Chevy Duty sells some that fit from 1948-87...do these fit our trucks well? Any help will be appreciated..thanks.

70c10 · 12-01-2004, 08:30 AM

I recently installed retractable lap belts in my dads 70'. I did a search on ebay for retractable seat belts and found both 2 point and 3 point kits for under $50. I bought 4 angle brackets ($2 each) at Home depot to mount. Julianos sells an anchor plate kit ($15) that I would recommend for floor strength to mount the retractors. It's pretty easy and they look great.

jhwkns · 12-01-2004, 10:12 AM

I have S-10 belts in mine. They work fine.

JimKshortstep4x4 · 12-01-2004, 10:20 AM

S-10 belts work good. The passenger side hould be a direct bolt in but the driver's side needs the anchor point on the floor relocated.

Jim

71Shortbed · 12-01-2004, 03:58 PM

Take a look at my post in this thread
http://67-72chevytrucks.com/vboard/s....php3?t=116099
I don't know what these came out of but they fit and work great.....

RON WOODGEARD · 12-01-2004, 04:27 PM

Getr ahold of Shawn at www.****************.com. I bought driver, Passgenger, and center.. The two are retractable.... New and a few colors also..

12-01-2004, 02:47 AM	#1
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,180	What can I use for seatbelts? Hi. I want seatbelts in my 70 GMC that have retractable shoulder harnesses. What will work well in my truck with the least amount of fabricating? I see Chevy Duty sells some that fit from 1948-87...do these fit our trucks well? Any help will be appreciated..thanks. __________________ "You can take the man out of PA, but you can't take PA out of the man"

12-01-2004, 08:30 AM	#2
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	I recently installed retractable lap belts in my dads 70'. I did a search on ebay for retractable seat belts and found both 2 point and 3 point kits for under $50. I bought 4 angle brackets ($2 each) at Home depot to mount. Julianos sells an anchor plate kit ($15) that I would recommend for floor strength to mount the retractors. It's pretty easy and they look great. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

12-01-2004, 10:12 AM	#3
jhwkns Registered Cruiser Join Date: May 2002 Location: Las Vegas NV Posts: 2,230	I have S-10 belts in mine. They work fine. __________________ I intend to live forever. So far, so good.

12-01-2004, 03:58 PM	#5
71Shortbed Registered User Join Date: Jul 2004 Location: Lilburn, GA Posts: 209	Take a look at my post in this thread http://67-72chevytrucks.com/vboard/s....php3?t=116099 I don't know what these came out of but they fit and work great..... Last edited by 71Shortbed; 12-01-2004 at 03:59 PM. Reason: correction

12-01-2004, 10:20 AM	#4
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	S-10 belts work good. The passenger side hould be a direct bolt in but the driver's side needs the anchor point on the floor relocated. Jim

12-01-2004, 04:27 PM	#6
RON WOODGEARD Resident Young Old Dude ! Join Date: Jul 2001 Location: Nevada Posts: 1,948	Getr ahold of Shawn at www.****************.com. I bought driver, Passgenger, and center.. The two are retractable.... New and a few colors also..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.