how low should i go? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SuperCheyanne72 · 12-05-2004, 02:09 AM

I thinking about doing a 4-5 inch

drop on my truck any ideas?

Alexis · 12-05-2004, 03:05 AM

4/6

Tx Firefighter · 12-05-2004, 08:56 AM

I run 4.5/6 drops on my 1/2 ton trucks. You can drive one everyday, pretty much anywhere there is pavement, without worry.

bagged_and_bodydrop · 12-05-2004, 11:02 PM

4-5 should be enought to go over speed bumps anything more than that ud run into problems on tall speed bumps.

skahide · 12-05-2004, 11:57 PM

how is the best (CHEAPEST) way to get the 4/5, 4.5/6 or 4/6?

TIMSPEED · 12-06-2004, 03:36 AM

Quote:

Originally Posted by skahide

how is the best (CHEAPEST) way to get the 4/5, 4.5/6 or 4/6?

If you have a 73-87, like your signature says, then what I would reccomend, is getting the Summit 2½" Spindles ($225) and 2" drop springs ($90), then get the DJM Rear Flip Kit ($90). That'll give you quality parts, quality ride, and cheap price.

SuperCheyanne72 · 12-06-2004, 08:14 AM

thanks for the idea

grnddwn · 12-06-2004, 01:43 PM

Stop when it hits the ground

Chris~GS · 12-06-2004, 04:12 PM

Then drag it till the rockers fall off..

skahide · 12-06-2004, 09:03 PM

will this:
2" drop springs ($90), then get the DJM Rear Flip Kit ($90)
just give me a 2/5 drop?

bagged_and_bodydrop · 12-06-2004, 09:20 PM

look at stylinconcepts.com
good cheap lowering kits and quality products, on my lowered 67 thats what i used a 5-7 drop on it, and on my other 83 with a 5-6 drop i have a belltech lowering kit, great kti, but dont forget shocks.

12-05-2004, 02:09 AM	#1
SuperCheyanne72 #1 OU Soonerfan Join Date: Dec 2004 Location: Oklahoma Posts: 85	how low should i go? I thinking about doing a 4-5 inch drop on my truck any ideas?

12-05-2004, 08:56 AM	#3
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	I run 4.5/6 drops on my 1/2 ton trucks. You can drive one everyday, pretty much anywhere there is pavement, without worry. __________________ I'm on the Instagram- @Gearhead_Kevin

12-05-2004, 11:02 PM	#4
bagged_and_bodydrop Just drag it Join Date: Dec 2004 Location: ardmore, oklahoma Posts: 98	reply 4-5 should be enought to go over speed bumps anything more than that ud run into problems on tall speed bumps.

12-06-2004, 04:12 PM	#9
Chris~GS Registered User Join Date: Nov 2004 Posts: 18	Then drag it till the rockers fall off.. __________________ Cut=Custom <<and that is the coolest smiley EVER

12-06-2004, 09:20 PM	#11
bagged_and_bodydrop Just drag it Join Date: Dec 2004 Location: ardmore, oklahoma Posts: 98	reply look at stylinconcepts.com good cheap lowering kits and quality products, on my lowered 67 thats what i used a 5-7 drop on it, and on my other 83 with a 5-6 drop i have a belltech lowering kit, great kti, but dont forget shocks.

12-05-2004, 03:05 AM	#2
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,874	4/6

12-05-2004, 11:57 PM	#5
skahide Looking @ 67 Chevy Short Step Join Date: Jul 2004 Location: Near Tyler, Texas Posts: 136	how is the best (CHEAPEST) way to get the 4/5, 4.5/6 or 4/6?

12-06-2004, 08:14 AM	#7
SuperCheyanne72 #1 OU Soonerfan Join Date: Dec 2004 Location: Oklahoma Posts: 85	thanks for the idea

12-06-2004, 01:43 PM	#8
grnddwn belly dragger Join Date: Feb 2002 Location: sherwood park AB. Canada Posts: 694	Stop when it hits the ground

12-06-2004, 09:03 PM	#10
skahide Looking @ 67 Chevy Short Step Join Date: Jul 2004 Location: Near Tyler, Texas Posts: 136	will this: 2" drop springs ($90), then get the DJM Rear Flip Kit ($90) just give me a 2/5 drop?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.