WTB:D60fr/14-bolt rr - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 01-05-2005, 10:56 AM

I know,good luck.Who doesn`t.Well,I`m askin`and lookin`til I get`em.Thought I had some,fell through.Now I REALLY want them!Would prefer good used CUCV axles:4.56/Locker Rr.But any K/30 axles will do.

500HP/SB · 01-07-2005, 11:14 PM

i saw that pair on ebay 2 or 3 days ago, had 4;10's and posi, limited slip....what ever, bid was at $700, go search for it, it may still be there

Mudder · 01-07-2005, 11:19 PM

Guy over at CTS has a d60 (4.56) for 1400 and has been gone through or it seems like it was in really good shape.

plumbcut · 01-08-2005, 04:19 AM

man check out ebay if you're willing to throw the cash down.. earlier tonite I looked and saw 4 or 5 different sets.. a couple of them were really nice too... they were all on the eastern half of the states too

pc

Americanrider · 01-08-2005, 02:51 PM

http://www.boyceequipment.com/

and here is a set on e-bay right now:

http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWA%3AIT

Good luck, like to see the pics when yer done!

**special-K** · 01-09-2005, 10:21 AM

Hey thanks all.Ok,what is CTS?When I search on Ebay,I never come up with anything.I`ve tryed D60axle,1t,CUCV...every whichway.I`ll try some more,now.Maybe nothing was listed when I checked.What do you guys use for that search?Don`t want to look through every axle under the sun.Considered Boyce,but Dang,$2500+ship to east coast.Don`t think so(salty!get it?Utah,salty?heh-heh).Least not until the house is paid for.I`d like to get a banged-up CUCV,they had one,$4g.Like to find one`round here.

Mudder · 01-09-2005, 10:24 AM

You 'll have to register like here:

www.customtruckshowcase.com

**special-K** · 01-09-2005, 10:33 AM

Americanrider,I checked that link.Think I`m gonna contact him.He seems to have more.Think that`s a Dodge,internal locking hubs.They don`t look like it,though.There are alot of Dodge D60Fr axles out there.What would be differences to deal with?I know their frames are wider than GM & Ford out back.Areas of concern would be:1)steering 2)yoke 3)spring pads.

1969 GMC · 01-09-2005, 07:56 PM

I have a dodge dana 60 that im going to use...other than being 2" narrower than a GM 60, the spring perches come out to be 1/4" farther out than the GM. Im not really worried about that, to tell the truth.

Americanrider · 01-09-2005, 10:10 PM

I found the GSA Gov auction website the other day, sometimes they have beat-up 1 tons & 'burbs for sale cheap. Mostly old Forest Service/Military Leased/FBI/Misc Fed vehicles. Also look into any DRMO auctions. They sell excess stuff at most large military bases like used 5 tons, 2 &1/2's, Blazers & junked Hummers. I know a guy who makes a living selling old 5-tons to farmers, they buy them here at Ft. Lewis and takes them over to Southern Idaho for re-sale. You could also try a google search for Military Vehicle Sales.

(Government Service Administration)
(Defense Re-utilization Marketing Office)

Boyce also has a Chev 1-ton dbl cab for sale in the pick-up section of their website last I looked. Scrap steel is really high righ now for whatever you can't part out & sell. Assuming you have the time & room to tear one apart.

When you run your e-bay search just type in "Dana" might have about 11-15 pages of stuff to look through but it's all there. Some times sellers don't use common sense when listing something, example: Last week I just picked up a M-1200 Warn Winch, NIB, for 800 bones. Nobody bid on it becuase it the lady had listed as a Warn Part Number.

**special-K** · 01-09-2005, 11:39 PM

Thanks for all this,guys.Hey Boone,your buddy must be sellin`to those `tater harvesters,eh?

*gn4u2c* · 01-10-2005, 12:02 PM

I think I have a 4.56 14 FF up me pops house kept as a spare for my truck but turns out these things last forever.

Ratpowerd67 · 01-10-2005, 10:27 PM

do a search on ebay " DANA 60 FRONT" that will get you there......rat

454_72_4X4 · 01-11-2005, 07:55 PM

I usually just search for dana 60. Try about any way you can think of that somebody might list it. Also the least amount or words the most amount of "hits" you get.

O/T but I can't resist...Hey Americanrider, Ya got any pics of the dumper setup on your truck? If that's your truck in your avatar. I would love to do that to mine someday.

Americanrider · 01-12-2005, 12:48 AM

http://67-72chevytrucks.com/vboard/s....php3?t=132629

4x4Poet · 01-12-2005, 08:47 AM

special-K, since you live in Maryland, have you considered making a trip to Harry's U-Pull It near West Hazleton, PA? From what I understand, all parts are under $100, so you could pick up both axles for less than $200. They charge a $1 entrance fee to keep the parts prices low. Read a local article about Harry's.

I've read other bulletin board claims that all of Harry's axles cost $65. No matter which one. Consider the source, you know. Worth a call to see if a trip would be worth it. Good hunting.

**special-K** · 01-12-2005, 09:08 AM

Harry`s sounds like a cool place.I`m checking it out even if I get axles first.I go to a junkyard a little south of Hazleton.This guy sends the mobile-crusher guys away.Tells them,"go crush everybody elses,then they`ll come to me for old parts".I like that thinking.

muddobber40 · 01-12-2005, 02:14 PM

shot you a pm

72 Cheyenne K20 · 01-20-2005, 06:06 PM

Special-k, I lived in MD most of my life and I used to go to brandywine for parts. BIG yard out there, has all kinds of 67-72 trucks. If doesn't have one he can get you one.

Scott

CRASHandBURN69 · 01-20-2005, 07:11 PM

hey special-k i got a set of 1ton axles out of a 1978 Chevy camper special that are alot like what you need. I'm in Vandergrift,pa. if intrested email me at bmahan@portsys.net

**special-K** · 01-22-2005, 07:23 AM

CRASHandBURN69,What do you have?D60f & D70r?Single wheel or dual?

01-05-2005, 10:56 AM	#1
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	WTB:D60fr/14-bolt rr I know,good luck.Who doesn`t.Well,I`m askin`and lookin`til I get`em.Thought I had some,fell through.Now I REALLY want them!Would prefer good used CUCV axles:4.56/Locker Rr.But any K/30 axles will do. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-07-2005, 11:14 PM	#2
500HP/SB please don't break Join Date: Sep 2003 Location: southern california Posts: 173	i saw that pair on ebay 2 or 3 days ago, had 4;10's and posi, limited slip....what ever, bid was at $700, go search for it, it may still be there __________________ 70 k10 35s 350/sm465/np205 titanspeed.com

01-08-2005, 02:51 PM	#5
Americanrider Registered User Join Date: Dec 2004 Location: NW, WA. Posts: 1,421	try this http://www.boyceequipment.com/ and here is a set on e-bay right now: http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWA%3AIT Good luck, like to see the pics when yer done!

01-09-2005, 10:21 AM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Hey thanks all.Ok,what is CTS?When I search on Ebay,I never come up with anything.I`ve tryed D60axle,1t,CUCV...every whichway.I`ll try some more,now.Maybe nothing was listed when I checked.What do you guys use for that search?Don`t want to look through every axle under the sun.Considered Boyce,but Dang,$2500+ship to east coast.Don`t think so(salty!get it?Utah,salty?heh-heh).Least not until the house is paid for.I`d like to get a banged-up CUCV,they had one,$4g.Like to find one`round here. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-09-2005, 10:33 AM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Americanrider,I checked that link.Think I`m gonna contact him.He seems to have more.Think that`s a Dodge,internal locking hubs.They don`t look like it,though.There are alot of Dodge D60Fr axles out there.What would be differences to deal with?I know their frames are wider than GM & Ford out back.Areas of concern would be:1)steering 2)yoke 3)spring pads. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-07-2005, 11:19 PM	#3
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Guy over at CTS has a d60 (4.56) for 1400 and has been gone through or it seems like it was in really good shape.

01-08-2005, 04:19 AM	#4
plumbcut california fill Join Date: Apr 2004 Location: Sunny So-Cal Posts: 694	man check out ebay if you're willing to throw the cash down.. earlier tonite I looked and saw 4 or 5 different sets.. a couple of them were really nice too... they were all on the eastern half of the states too pc

01-09-2005, 10:24 AM	#7
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	You 'll have to register like here: www.customtruckshowcase.com

01-09-2005, 07:56 PM	#9
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	I have a dodge dana 60 that im going to use...other than being 2" narrower than a GM 60, the spring perches come out to be 1/4" farther out than the GM. Im not really worried about that, to tell the truth. __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

01-09-2005, 10:10 PM	#10
Americanrider Registered User Join Date: Dec 2004 Location: NW, WA. Posts: 1,421	other cheap drivetrain sources I found the GSA Gov auction website the other day, sometimes they have beat-up 1 tons & 'burbs for sale cheap. Mostly old Forest Service/Military Leased/FBI/Misc Fed vehicles. Also look into any DRMO auctions. They sell excess stuff at most large military bases like used 5 tons, 2 &1/2's, Blazers & junked Hummers. I know a guy who makes a living selling old 5-tons to farmers, they buy them here at Ft. Lewis and takes them over to Southern Idaho for re-sale. You could also try a google search for Military Vehicle Sales. (Government Service Administration) (Defense Re-utilization Marketing Office) Boyce also has a Chev 1-ton dbl cab for sale in the pick-up section of their website last I looked. Scrap steel is really high righ now for whatever you can't part out & sell. Assuming you have the time & room to tear one apart. When you run your e-bay search just type in "Dana" might have about 11-15 pages of stuff to look through but it's all there. Some times sellers don't use common sense when listing something, example: Last week I just picked up a M-1200 Warn Winch, NIB, for 800 bones. Nobody bid on it becuase it the lady had listed as a Warn Part Number.

01-09-2005, 11:39 PM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Thanks for all this,guys.Hey Boone,your buddy must be sellin`to those `tater harvesters,eh? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-10-2005, 12:02 PM	#12
gn4u2c Account Suspended Join Date: Mar 2003 Location: southern pa Posts: 698	I think I have a 4.56 14 FF up me pops house kept as a spare for my truck but turns out these things last forever.

01-10-2005, 10:27 PM	#13
Ratpowerd67 Registered User Join Date: Aug 2002 Location: Trenton ,Texas Posts: 328	do a search on ebay " DANA 60 FRONT" that will get you there......rat

01-11-2005, 07:55 PM	#14
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	I usually just search for dana 60. Try about any way you can think of that somebody might list it. Also the least amount or words the most amount of "hits" you get. O/T but I can't resist...Hey Americanrider, Ya got any pics of the dumper setup on your truck? If that's your truck in your avatar. I would love to do that to mine someday. __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

01-12-2005, 12:48 AM	#15
Americanrider Registered User Join Date: Dec 2004 Location: NW, WA. Posts: 1,421	Look here http://67-72chevytrucks.com/vboard/s....php3?t=132629



Register or Log In To remove these advertisements.

01-12-2005, 08:47 AM	#16
4x4Poet Registered User Join Date: Nov 2004 Location: "Under Montana skies." Posts: 1,836	special-K, since you live in Maryland, have you considered making a trip to Harry's U-Pull It near West Hazleton, PA? From what I understand, all parts are under $100, so you could pick up both axles for less than $200. They charge a $1 entrance fee to keep the parts prices low. Read a local article about Harry's. I've read other bulletin board claims that all of Harry's axles cost $65. No matter which one. Consider the source, you know. Worth a call to see if a trip would be worth it. Good hunting. __________________ '71 GMC K20 Suburban, '71 GMC K10 Suburban, '72 Chevy C10 CST Suburban, '72 Chevy K20 clunker pickup.

01-12-2005, 09:08 AM	#17
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Harry`s sounds like a cool place.I`m checking it out even if I get axles first.I go to a junkyard a little south of Hazleton.This guy sends the mobile-crusher guys away.Tells them,"go crush everybody elses,then they`ll come to me for old parts".I like that thinking. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-12-2005, 02:14 PM	#18
muddobber40 Registered User Join Date: Sep 2004 Location: Cadmus, KS Posts: 31	shot you a pm

01-20-2005, 06:06 PM	#19
72 Cheyenne K20 Registered User Join Date: Feb 2003 Location: Staunton, Virginia Posts: 554	Special-k, I lived in MD most of my life and I used to go to brandywine for parts. BIG yard out there, has all kinds of 67-72 trucks. If doesn't have one he can get you one. Scott

01-20-2005, 07:11 PM	#20
CRASHandBURN69 Registered User Join Date: Jan 2005 Posts: 8	hey special-k i got a set of 1ton axles out of a 1978 Chevy camper special that are alot like what you need. I'm in Vandergrift,pa. if intrested email me at bmahan@portsys.net

01-22-2005, 07:23 AM	#21
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	CRASHandBURN69,What do you have?D60f & D70r?Single wheel or dual? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Register or Log In To remove these advertisements.