01-06-2005, 09:48 PM | #1 |
going no where fast
Join Date: Dec 2004
Location: Northern Kentucky
Posts: 207
|
wtb/t Transmission
i am looking for an overdrive tranny for a 1992 GMC 1500 4X4 ext. cab shortbed. I am mainly looking for a 700R4 but would also consider everything needed to switch over to a 5 speed. I don't have a lot of funds but am willing to trade my turbo 350 or some 1984 toyota 4X4 parts for one.
|
01-07-2005, 12:29 PM | #2 |
91 SWB 383
Join Date: Feb 2003
Location: Crandall,TX
Posts: 643
|
where r u loc . a buddy has 700r4 for 100.00. in good shape
__________________
96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet |
01-07-2005, 10:01 PM | #3 |
going no where fast
Join Date: Dec 2004
Location: Northern Kentucky
Posts: 207
|
i am in northern KY. Where are u? WOuld he ship if you are not very close?
|
01-10-2005, 08:34 PM | #4 |
going no where fast
Join Date: Dec 2004
Location: Northern Kentucky
Posts: 207
|
My zip is 41051 for a shipping quote. I am definitaly interested. Did it shift fine before it was removed? Is it a 2WD or 4WD tranny?
|
01-10-2005, 08:42 PM | #5 |
91 SWB 383
Join Date: Feb 2003
Location: Crandall,TX
Posts: 643
|
it a 2wd . trany . i'm in dallas . he will ship
__________________
96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet |
01-11-2005, 07:31 PM | #6 |
going no where fast
Join Date: Dec 2004
Location: Northern Kentucky
Posts: 207
|
i need a 4WD tranny. can you make a 2wd work? If you can, how much work would it be? I can do it if it can be done but do not want a lot of downtime with my truck.
|
01-11-2005, 10:23 PM | #7 |
91 SWB 383
Join Date: Feb 2003
Location: Crandall,TX
Posts: 643
|
i never know there was two types of 700r4 . there only one i know about . like to see a pic of yours
__________________
96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet |
01-12-2005, 09:43 PM | #8 |
going no where fast
Join Date: Dec 2004
Location: Northern Kentucky
Posts: 207
|
i don't have pics. i am trying to replace a TH350 with an overdrive. I know the 4x4 version has a shorter tail shaft and bolt holes to but up to the t-case. I dont know if a 2wd will work by just changing tail shafts or if you have to do more.
|
01-12-2005, 11:35 PM | #9 |
Registered User
Join Date: Apr 2004
Location: N.E. MO
Posts: 1,749
|
Yea the 2wd version will work if you change the output shaft but the output shaft is almost the last thing to come out of the trans case. = Complete trans disassembly. Easier to find a 4x4 version to begin with.
__________________
72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey |
01-13-2005, 11:18 AM | #10 |
going no where fast
Join Date: Dec 2004
Location: Northern Kentucky
Posts: 207
|
Any body got one for a 4WD? I need one before i go to college to save on gas since it will be mostly highway driving.
|
01-14-2005, 12:39 AM | #11 |
Young Gun wth Fast Inline
Join Date: Jan 2002
Location: Idaho
Posts: 1,475
|
Jonesy, I have a factory tranny out of one of those. I have some interest in it, but would you be interested. I want 350 for it firm. Its got an almost new clutch with it and its a nv3500 out of a 94 gmc 1/2 ton 4x4. Its in good shape. I can ship out of salt lake. Its quite light compared to some trannies. Let me know. JT
__________________
1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!! |
01-14-2005, 07:56 PM | #12 |
going no where fast
Join Date: Dec 2004
Location: Northern Kentucky
Posts: 207
|
i would be interested if shipping is not too high. i need something to get some more gas mileage out of it.
|
01-15-2005, 01:41 AM | #13 |
Young Gun wth Fast Inline
Join Date: Jan 2002
Location: Idaho
Posts: 1,475
|
Give me a zipcode and I can estimate it. Let me know.... its a good tranny with clutch. JT
__________________
1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!! |
01-15-2005, 03:41 PM | #14 |
going no where fast
Join Date: Dec 2004
Location: Northern Kentucky
Posts: 207
|
zip is 41051.
|
01-15-2005, 07:15 PM | #15 |
Young Gun wth Fast Inline
Join Date: Jan 2002
Location: Idaho
Posts: 1,475
|
It shows to be about 60$ via fedex to a business. Can you have it shipped to one? JT
__________________
1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!! |
01-15-2005, 08:55 PM | #16 |
going no where fast
Join Date: Dec 2004
Location: Northern Kentucky
Posts: 207
|
The only problem is i don't have all the parts (pedal, master cylinder, slave cylinder,.....) to switch over to a stick. I am still in high school and have VERY limited fund due to my burger flippin job. I would love to go to a stick but would need pretty much a whole doner truck to do so.
|
Bookmarks |
|
|