72 4x4 parts blazer for sale!!!!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 01-09-2005, 02:29 PM

Just got it in, no title.
Has a awesome windshield frame, no rust, upper cowl has no rust but does have a dent on drivers side cowl, I have a local guy that may want this, I'll know Friday if he wants it if not $250, not sure on shipping it though!!!
PS pump, brackets and Box $100 plus shipping
205 AT high hump $25 plus shipping
Metal rad hose $25 plus shipping
Front outer bumper brackets $50 plus shipping
gas tank filler $30 plus shipping
outer rear bumper brackets $15 plus shipping
Has a gas tank on it but its dented
Inner rear panel strips, have some surface rust on them $20 plus shipping
Body is pretty trash, pass door is a truck door
Has the complete running gear under it, TH350 tranny and 205 transfer, 350 motor, frontend is missing some parts, complete rearend, I'm not sure on ratio of these, waiting for it to get nicer to crawl under it. Has the chrome 205 shifter. ALL crossmembers, and driveshafts. ANY interest in running gear, frame, tranny transfer I'd like to sell complete but may part it out. I know nothing about the condition of running gear!!!
The snow needs to melt more so I can look and see what else is on it.
Thanks Randy

teeitup · 01-09-2005, 02:31 PM

more pics

67chev · 01-09-2005, 03:13 PM

How much for that dash bezel??

72 Cheyenne K20 · 01-09-2005, 05:57 PM

If parting, how much for the 205 shifter and linkage? Also, the front leaf springs, 2 or 3 leaves & 2.5" or 3" wide?

Scott

Huck · 01-09-2005, 06:40 PM

Does it have the spring for the jack handle? Too bad someone cut out the door pillar on the drivers side---the rest of the firewall looks solid and that would be easier to replace then the windshild frame!!

teeitup · 01-09-2005, 09:15 PM

67chev, $50 for the bezel

Its a rare original

Scott, I think I'm going to try to sell the running gear complete before I start to part it
Huck, I'll have to look for the jack spring, I wish they wouldn't of hacked the bottom of the pillar too but atleast the windhield area is good.
Thanks Randy

**71swb4x4** · 01-09-2005, 09:38 PM

Randy
I need one of the rear panel retainers that are welded to the inner rear quarter, can you pull one of those off for me? I'll take the gas filler. How bad is the gas tank dented?
Shawn

teeitup · 01-09-2005, 09:55 PM

Shawn, let me get the filler off this week after work sometime, I'll get pics of the tank. I'll save you one of the retainers too. Thanks Randy

**71swb4x4** · 01-09-2005, 10:14 PM

No problem. I am in no hurry at all. It's 10 degrees here, you can take 2 months if you want

thekidd · 01-09-2005, 10:40 PM

I would be interested in the rest of the rear panel retainers if they haven't been promised. I can wait also. Thanks.

daves71k5 · 01-09-2005, 11:33 PM

Randy;
How good of shape is the pass side bed molding? Can't really tell in the pic if it's dented or not. If it's good let me know a price, shipping would be to 83211.
thanks Dave

**bobvilla67** · 01-10-2005, 12:37 AM

Randy let me know on the windshield frame and maybe even the running gear.thanks,Bobby

teeitup · 01-10-2005, 01:00 AM

Kidd, I'll try to get them off
Dave, I'll check it out
Bobby, I pm'd you about a trade maybe!

Thanks Randy

rolnlow · 01-10-2005, 11:43 AM

Randy.I'll buy the whole thing call me! cash this time !!!

teeitup · 01-10-2005, 01:58 PM

Ronnie, I pm'd you!

Chevy Muscle · 01-10-2005, 02:21 PM

If this isn't gone, I would like the proportioning (combination) valve, if it's any good.

Also, if the rear end is a posi, let me know... I might have to make another trek to your place.

Mark70Z · 01-10-2005, 05:47 PM

Randy:

If parting out...I'm looking for (I don't know what you call them) the metal pieces on the rear quarters for holding on the vinal panels?!? I believe there are three on each side... Who knows...hopefully you know what I mean.

teeitup · 01-10-2005, 06:07 PM

Muscle, I'll see if its traded off asap
Mark, I've got some around here, I'll have to look this weekend, we are getting ICE all this week, yuk.
Thanks Randy

c-1072 · 01-10-2005, 06:26 PM

Anything left of the rear floor and rockerboxes ?

teeitup · 01-10-2005, 06:42 PM

Sorry, I've been waiting for the snow and ice to melt so I can see what everything is like, we got more ice today and supposed to get more tomorrow and snow on Wed. I'm waiting patiently. Thanks Randy

chucks70 · 01-10-2005, 09:57 PM

When you get a chance, what kind of shape is the bedfloor in and the inner quarter panels around the wheel tubs.

meathead95 · 01-11-2005, 02:49 AM

how much for the transfer case and adapter?

teeitup · 01-11-2005, 09:43 AM

Chuck, I'll chck it out asap
Keith, I'd like to sell running gear whole, I'm in the middle of a deal right now
I'd like $450 for whole running gear, minus body and parts I have listed individually above
Thanks Randy

Mark70Z · 01-11-2005, 04:12 PM

Randy:

Thanks! Let me know if you have those pieces and how much...ok (also, maybe the proper name for them

). Man...it's in the high 70's here!!!

sakohntr · 01-11-2005, 06:04 PM

Randy, i gotta have the 4x4 metal upper radiator hose you listed. And can you show a photo of these "rare" rear panel fasteners everybody needs. I know of some junked out cst blazers but there aint much left. thanks bruce

01-09-2005, 02:29 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	72 4x4 parts blazer for sale!!!!!! Just got it in, no title. Has a awesome windshield frame, no rust, upper cowl has no rust but does have a dent on drivers side cowl, I have a local guy that may want this, I'll know Friday if he wants it if not $250, not sure on shipping it though!!! PS pump, brackets and Box $100 plus shipping 205 AT high hump $25 plus shipping Metal rad hose $25 plus shipping Front outer bumper brackets $50 plus shipping gas tank filler $30 plus shipping outer rear bumper brackets $15 plus shipping Has a gas tank on it but its dented Inner rear panel strips, have some surface rust on them $20 plus shipping Body is pretty trash, pass door is a truck door Has the complete running gear under it, TH350 tranny and 205 transfer, 350 motor, frontend is missing some parts, complete rearend, I'm not sure on ratio of these, waiting for it to get nicer to crawl under it. Has the chrome 205 shifter. ALL crossmembers, and driveshafts. ANY interest in running gear, frame, tranny transfer I'd like to sell complete but may part it out. I know nothing about the condition of running gear!!! The snow needs to melt more so I can look and see what else is on it. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-09-2005, 02:31 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	more pics __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-09-2005, 03:13 PM	#3
67chev Registered User Join Date: Apr 2004 Location: Spokane, WA Posts: 458	How much for that dash bezel?? __________________ "SicStee8" Chevy SWB Fleetside, in progress...500 HP 383 w/TriPower, 700r4, 3.73's, Lowered, Shaved Driprail/sidemarkers/handles/ant, Gonna rock!! '96 Chevy Tahoe 4X4 '84 Chevy C/K10 4X4 (FOR SALE)

01-09-2005, 09:15 PM	#6
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	67chev, $50 for the bezel Its a rare original Scott, I think I'm going to try to sell the running gear complete before I start to part it Huck, I'll have to look for the jack spring, I wish they wouldn't of hacked the bottom of the pillar too but atleast the windhield area is good. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-09-2005, 09:38 PM	#7
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,499	Randy I need one of the rear panel retainers that are welded to the inner rear quarter, can you pull one of those off for me? I'll take the gas filler. How bad is the gas tank dented? Shawn __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

01-09-2005, 05:57 PM	#4
72 Cheyenne K20 Registered User Join Date: Feb 2003 Location: Staunton, Virginia Posts: 554	If parting, how much for the 205 shifter and linkage? Also, the front leaf springs, 2 or 3 leaves & 2.5" or 3" wide? Scott

01-09-2005, 06:40 PM	#5
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,261	Does it have the spring for the jack handle? Too bad someone cut out the door pillar on the drivers side---the rest of the firewall looks solid and that would be easier to replace then the windshild frame!!

01-09-2005, 09:55 PM	#8
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Shawn, let me get the filler off this week after work sometime, I'll get pics of the tank. I'll save you one of the retainers too. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-09-2005, 10:14 PM	#9
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,499	No problem. I am in no hurry at all. It's 10 degrees here, you can take 2 months if you want __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

01-09-2005, 10:40 PM	#10
thekidd Registered User Join Date: Oct 2004 Location: Piedmont of North Carolina Posts: 194	I would be interested in the rest of the rear panel retainers if they haven't been promised. I can wait also. Thanks. __________________ thekidd 95 Silverado 2000 Suburban 4x4 91 Nissan 4x4 65 Impala SS (Mom and Dads now mine) 1971 K5 Blazer(Father and son project) 1972 2WD Blazer

01-09-2005, 11:33 PM	#11
daves71k5 Registered User Join Date: Jan 2002 Location: American Falls, Idaho-USA Posts: 318	body molding Randy; How good of shape is the pass side bed molding? Can't really tell in the pic if it's dented or not. If it's good let me know a price, shipping would be to 83211. thanks Dave

01-10-2005, 12:37 AM	#12
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 781	Randy let me know on the windshield frame and maybe even the running gear.thanks,Bobby __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350

01-10-2005, 01:00 AM	#13
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Kidd, I'll try to get them off Dave, I'll check it out Bobby, I pm'd you about a trade maybe! Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-10-2005, 11:43 AM	#14
rolnlow Registered User Join Date: Nov 2001 Location: independence mo usa Posts: 333	Randy.I'll buy the whole thing call me! cash this time !!! __________________ www.krazykustumzkc.com

01-10-2005, 01:58 PM	#15
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Ronnie, I pm'd you! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

01-10-2005, 02:21 PM	#16
Chevy Muscle < 69 Blazer Join Date: Mar 2004 Location: Nevada, TX Posts: 292	If this isn't gone, I would like the proportioning (combination) valve, if it's any good. Also, if the rear end is a posi, let me know... I might have to make another trek to your place.

01-10-2005, 05:47 PM	#17
Mark70Z Registered User Join Date: Sep 2003 Location: Jacksonville, FL Posts: 128	Randy: If parting out...I'm looking for (I don't know what you call them) the metal pieces on the rear quarters for holding on the vinal panels?!? I believe there are three on each side... Who knows...hopefully you know what I mean.

01-10-2005, 06:07 PM	#18
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Muscle, I'll see if its traded off asap Mark, I've got some around here, I'll have to look this weekend, we are getting ICE all this week, yuk. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-10-2005, 06:26 PM	#19
c-1072 Registered User Join Date: Sep 2004 Location: rochester NY Posts: 777	rear floor and rocker boxes Anything left of the rear floor and rockerboxes ?

01-10-2005, 06:42 PM	#20
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Sorry, I've been waiting for the snow and ice to melt so I can see what everything is like, we got more ice today and supposed to get more tomorrow and snow on Wed. I'm waiting patiently. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-10-2005, 09:57 PM	#21
chucks70 Registered User Join Date: Feb 2002 Location: Cadiz, OH Posts: 628	When you get a chance, what kind of shape is the bedfloor in and the inner quarter panels around the wheel tubs. __________________ 68 1 ton dually 292, 2001 Sebring, 2004 Trailblazer, 11 Camaro Convertible.

01-11-2005, 02:49 AM	#22
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	how much for the transfer case and adapter? __________________ 72 2wd blazer 72 swb 4x4

01-11-2005, 09:43 AM	#23
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Chuck, I'll chck it out asap Keith, I'd like to sell running gear whole, I'm in the middle of a deal right now I'd like $450 for whole running gear, minus body and parts I have listed individually above Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 01-11-2005 at 09:58 AM.

01-11-2005, 04:12 PM	#24
Mark70Z Registered User Join Date: Sep 2003 Location: Jacksonville, FL Posts: 128	Randy: Thanks! Let me know if you have those pieces and how much...ok (also, maybe the proper name for them ). Man...it's in the high 70's here!!!

01-11-2005, 06:04 PM	#25
sakohntr Registered User Join Date: Mar 2002 Location: Floodwood Minnesota Posts: 1,057	radiator hose Randy, i gotta have the 4x4 metal upper radiator hose you listed. And can you show a photo of these "rare" rear panel fasteners everybody needs. I know of some junked out cst blazers but there aint much left. thanks bruce __________________ 1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison.

Register or Log In To remove these advertisements.