need Jimmy/Blazer parts? New Hampshire - The 1947 - Present Chevrolet & GMC Truck Message Board Network

crosby · 01-11-2005, 12:59 PM

I have an 87 GMC Jimmy I am pulling the motor out of for my truck, and there may be a few good pieces on it (not too many). The roof looks okay, and I think the liftgate is okay too. It's a dark blue with a blue vinyl interior. The fenders were junk, and the grill and support are gone. If you want the gate I am asking $50 for that and $100 for the roof. Any questions, please PM me. Thank you!

69ssnova · 01-11-2005, 05:34 PM

how is the dash pad

crosby · 01-11-2005, 05:41 PM

Hi 69ssnova, I will take a look tonight, post a picture. Thank you!

I will add several pictures tonight of the Jimmy. Thanks!

crosby · 01-12-2005, 01:22 PM

Sorry, I didn't get home until 10 last night, ended up working late. I should be able to get some pictures tonight...

crosby · 01-12-2005, 09:11 PM

here's the pictures. dash doesn't look good. it was dark out, so the mirrors are hard to see, but they are very good. some nice Warn hubs too.

mxfireman · 02-18-2005, 03:25 PM

Are you wanting to get rid of the Warn Locking Hubs Also?

crosby · 02-18-2005, 03:29 PM

sorry, they're gone. thank you for asking

edman87 · 02-19-2005, 10:49 PM

Are you parting out entire vehicle? If so, I could use a few things, you would have to be 1500 miles away.my want list:
shifter boot and hold down ring
possibly shifter handle
coolant reservoir
these and maybe other bits and pieces if prices are right

crosby · 02-19-2005, 10:53 PM

Hi Ed. Not much left. Got rid of the body a week or two ago. I may have a coolant reservoir, I will check. Anything else you need? I have hydraulic clutch parts including the bell housing, xfer case adapter, and pedals. Thank you.

edman87 · 02-21-2005, 01:02 AM

Remembered that I don't want a shifter handle any way, going to do a little creative heat and bend on mine and paint it. I could actually use a junk clutch master cyl for a fit up, hate to buy a new 1 and have it sit for over a year before I actually use it. What else you got left?

crosby · 02-21-2005, 08:49 AM

Hi Ed. I have the clutch master, but no reservoir, and I don't see the shifter handle anywhere. How does $5 plus shipping for the master sound? I really only have minor pieces left right now, other than the bell housing, pedal assembly, and xfer case adaptor. I have a TH350, NP208, SM465, some halfway decent dumbo mirrors, a relatively new brake master and booster, a complete hydroboost setup, a TH400 and a NP205, and dana 60 front and 14 bolt FF rear. I also have a tilt auto column, and steering box (from 85 K30). I think that's it for now. Thank you,

edman87 · 02-21-2005, 02:44 PM

I will take the clutch master cyl, shipped to 70775. Would love to have the 60/14 bolt, you seem to come up with so cool stuff, but are 1500 miles away.

*79 silverado* · 02-22-2005, 11:02 AM

How are the buckets, console, and floor mounting brackets for all three of em.

crosby · 02-22-2005, 11:09 AM

sorry, already gone. Thank you for asking.

*79 silverado* · 02-22-2005, 01:55 PM

ok, next question, what was the transfer case and how much for it plus the crossmembers and everything to toss it into a 87 suburban?

crosby · 02-22-2005, 01:58 PM

Hi 79, I don't have the truck any more. I do have a 208 transfer case, and the pieces I listed a few messages above. Sorry, no crossmember. Thanks very much.

zx9Duran · 03-02-2005, 08:40 PM

OK need the K5 emblem on front pass. side and the rear lift gate IF the regulator arm are good , Mine keep popping out of the track .

crosby · 03-04-2005, 12:14 AM

Sorry, no emblems left, or body parts at all. I had only what was listed a few messages back, now I have only a SM465, bellhousing and slave cylinder (arm), adapter (to 208), and pedal assembly. A few minor things like dumbo mirrors, master cylinder/booster (worth nothing essentially) and that's about it from that. Thanks very much, and thank you for asking.

clarkjw24 · 03-04-2005, 01:30 AM

How much for the D60?

crosby · 03-04-2005, 01:35 AM

sorry, that's gone. So is the 14 bolt FF, the 205 and the TH400 that were in the 85 K30. Thanks for asking.

01-11-2005, 12:59 PM	#1
crosby Registered User Join Date: Aug 2004 Location: New Hampshire Posts: 437	need Jimmy/Blazer parts? New Hampshire I have an 87 GMC Jimmy I am pulling the motor out of for my truck, and there may be a few good pieces on it (not too many). The roof looks okay, and I think the liftgate is okay too. It's a dark blue with a blue vinyl interior. The fenders were junk, and the grill and support are gone. If you want the gate I am asking $50 for that and $100 for the roof. Any questions, please PM me. Thank you!

01-11-2005, 05:41 PM	#3
crosby Registered User Join Date: Aug 2004 Location: New Hampshire Posts: 437	Hi 69ssnova, I will take a look tonight, post a picture. Thank you! I will add several pictures tonight of the Jimmy. Thanks! Last edited by crosby; 01-11-2005 at 05:42 PM. Reason: add more info

01-12-2005, 09:11 PM	#5
crosby Registered User Join Date: Aug 2004 Location: New Hampshire Posts: 437	pictures of Jimmy here's the pictures. dash doesn't look good. it was dark out, so the mirrors are hard to see, but they are very good. some nice Warn hubs too. Attached Images

02-18-2005, 03:25 PM	#6
mxfireman Registered User Join Date: Feb 2005 Posts: 5	Are you wanting to get rid of the Warn Locking Hubs Also? __________________ Shane *WANTED* Medium Blue Door Panels, 4" Shackle Flip, Sway Bar Disconnects *FOR SALE* SPAL 16" Electric Fan, Factory A/C Parts

02-19-2005, 10:49 PM	#8
edman87 junk collector Join Date: Dec 2004 Location: above Baton Rouge, LA Posts: 693	Are you parting out entire vehicle? If so, I could use a few things, you would have to be 1500 miles away.my want list: shifter boot and hold down ring possibly shifter handle coolant reservoir these and maybe other bits and pieces if prices are right __________________ '87/89/76 K5 in progress '99 K2500 short crew '91 camaro rs '98 jeep tj '52 willys cj3a

01-11-2005, 05:34 PM	#2
69ssnova Registered User Join Date: Dec 2002 Location: rock hill sc Posts: 69	how is the dash pad

01-12-2005, 01:22 PM	#4
crosby Registered User Join Date: Aug 2004 Location: New Hampshire Posts: 437	Sorry, I didn't get home until 10 last night, ended up working late. I should be able to get some pictures tonight...

02-18-2005, 03:29 PM	#7
crosby Registered User Join Date: Aug 2004 Location: New Hampshire Posts: 437	sorry, they're gone. thank you for asking

02-19-2005, 10:53 PM	#9
crosby Registered User Join Date: Aug 2004 Location: New Hampshire Posts: 437	Hi Ed. Not much left. Got rid of the body a week or two ago. I may have a coolant reservoir, I will check. Anything else you need? I have hydraulic clutch parts including the bell housing, xfer case adapter, and pedals. Thank you.

02-21-2005, 01:02 AM	#10
edman87 junk collector Join Date: Dec 2004 Location: above Baton Rouge, LA Posts: 693	Remembered that I don't want a shifter handle any way, going to do a little creative heat and bend on mine and paint it. I could actually use a junk clutch master cyl for a fit up, hate to buy a new 1 and have it sit for over a year before I actually use it. What else you got left? __________________ '87/89/76 K5 in progress '99 K2500 short crew '91 camaro rs '98 jeep tj '52 willys cj3a

02-21-2005, 08:49 AM	#11
crosby Registered User Join Date: Aug 2004 Location: New Hampshire Posts: 437	Hi Ed. I have the clutch master, but no reservoir, and I don't see the shifter handle anywhere. How does $5 plus shipping for the master sound? I really only have minor pieces left right now, other than the bell housing, pedal assembly, and xfer case adaptor. I have a TH350, NP208, SM465, some halfway decent dumbo mirrors, a relatively new brake master and booster, a complete hydroboost setup, a TH400 and a NP205, and dana 60 front and 14 bolt FF rear. I also have a tilt auto column, and steering box (from 85 K30). I think that's it for now. Thank you,

02-21-2005, 02:44 PM	#12
edman87 junk collector Join Date: Dec 2004 Location: above Baton Rouge, LA Posts: 693	I will take the clutch master cyl, shipped to 70775. Would love to have the 60/14 bolt, you seem to come up with so cool stuff, but are 1500 miles away. __________________ '87/89/76 K5 in progress '99 K2500 short crew '91 camaro rs '98 jeep tj '52 willys cj3a

02-22-2005, 11:02 AM	#13
79 silverado Account Suspended Join Date: Nov 2004 Location: Rhode Island/Vermont Posts: 583	How are the buckets, console, and floor mounting brackets for all three of em.

02-22-2005, 11:09 AM	#14
crosby Registered User Join Date: Aug 2004 Location: New Hampshire Posts: 437	sorry, already gone. Thank you for asking. __________________ Crosby 1978 Chevrolet K10 stepside NH

02-22-2005, 01:55 PM	#15
79 silverado Account Suspended Join Date: Nov 2004 Location: Rhode Island/Vermont Posts: 583	ok, next question, what was the transfer case and how much for it plus the crossmembers and everything to toss it into a 87 suburban?



Register or Log In To remove these advertisements.

02-22-2005, 01:58 PM	#16
crosby Registered User Join Date: Aug 2004 Location: New Hampshire Posts: 437	Hi 79, I don't have the truck any more. I do have a 208 transfer case, and the pieces I listed a few messages above. Sorry, no crossmember. Thanks very much. __________________ Crosby 1978 Chevrolet K10 stepside NH

03-02-2005, 08:40 PM	#17
zx9Duran Registered User Join Date: Feb 2005 Location: Garland TX Posts: 8	OK need the K5 emblem on front pass. side and the rear lift gate IF the regulator arm are good , Mine keep popping out of the track .

03-04-2005, 12:14 AM	#18
crosby Registered User Join Date: Aug 2004 Location: New Hampshire Posts: 437	Sorry, no emblems left, or body parts at all. I had only what was listed a few messages back, now I have only a SM465, bellhousing and slave cylinder (arm), adapter (to 208), and pedal assembly. A few minor things like dumbo mirrors, master cylinder/booster (worth nothing essentially) and that's about it from that. Thanks very much, and thank you for asking. __________________ Crosby 1978 Chevrolet K10 stepside NH

03-04-2005, 01:30 AM	#19
clarkjw24 I like cheese Join Date: Aug 2004 Location: McBee, SC Posts: 192	How much for the D60? __________________ Cruiser: 1972 K5, 400/TH350/NP205, D44 and 12Bolt, 35 TSLs. Trail rig: 86 K5, 350 TBI, SM465/NP205, 5.13s, 14ff locked, h1 beadlocks, 42" TSLs, 64" rears, 56" fronts, D60 locked, 35pline, drive flanges, crossover, hydro assist, OBA. Tow rig: 2002 F350 PSD CC Dually FX4, chipped, cold air intake, BFGs

03-04-2005, 01:35 AM	#20
crosby Registered User Join Date: Aug 2004 Location: New Hampshire Posts: 437	sorry, that's gone. So is the 14 bolt FF, the 205 and the TH400 that were in the 85 K30. Thanks for asking. __________________ Crosby 1978 Chevrolet K10 stepside NH

Register or Log In To remove these advertisements.