top piece - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mister.freeze · 01-21-2005, 10:15 PM

Looking for the first 10 inces or so of any hard top: single wall, double, or even half. Anybody got a beatup or rolled top they are willing to take a circular saw or sawzall to?

blazer1971 · 01-21-2005, 10:46 PM

Where r u located?

mister.freeze · 01-21-2005, 11:48 PM

Spring Branch

mister.freeze · 01-21-2005, 11:48 PM

Texas

LT 72 Jimmy · 01-26-2005, 12:50 PM

I found a couple of blazers with tops at a salvage yard here in Arkansas. do you ever come this way?

LT

mister.freeze · 01-26-2005, 08:17 PM

No, i don't get up into the Ozarks much...

saulgoode · 01-26-2005, 11:05 PM

Sorry I don't have a top for ya, but are you trying to repair your top or do you have some project in the works?

Saulgoode

mister.freeze · 01-27-2005, 10:06 AM

Project. That part would be just a bit too tough to fab. Ultimately, I'll have a 2-piece hard top that will weigh less than 100 pounds.

MAC67 · 01-27-2005, 09:16 PM

i was wantong to do something similiar but cut it off right behind the door openings then fab in the back of a pick up cab to make my own halftop ,

6T8 · 01-29-2005, 10:47 PM

There is one on e-bay! Look under 1972 Blazer all categories. Bid at $5 Front of top looks good tree fell on back. Owner will probably cot off what you need. Would be easy to ship then

71swb4x4 · 01-30-2005, 12:51 AM

Linky

01-21-2005, 10:15 PM	#1
mister.freeze Registered User Join Date: Dec 2003 Location: Houston, TX Posts: 733	top piece Looking for the first 10 inces or so of any hard top: single wall, double, or even half. Anybody got a beatup or rolled top they are willing to take a circular saw or sawzall to? __________________ '72 K5, known as 'the Fox.'

01-21-2005, 11:48 PM	#3
mister.freeze Registered User Join Date: Dec 2003 Location: Houston, TX Posts: 733	Spring Branch __________________ '72 K5, known as 'the Fox.'

01-21-2005, 11:48 PM	#4
mister.freeze Registered User Join Date: Dec 2003 Location: Houston, TX Posts: 733	Texas __________________ '72 K5, known as 'the Fox.'

01-26-2005, 12:50 PM	#5
LT 72 Jimmy Registered User Join Date: Sep 2002 Location: Arkansas Posts: 252	tops I found a couple of blazers with tops at a salvage yard here in Arkansas. do you ever come this way? LT

01-26-2005, 08:17 PM	#6
mister.freeze Registered User Join Date: Dec 2003 Location: Houston, TX Posts: 733	No, i don't get up into the Ozarks much... __________________ '72 K5, known as 'the Fox.'

01-21-2005, 10:46 PM	#2
blazer1971 Registered User Join Date: Apr 2001 Location: apollo bch,fl. usa Posts: 134	Where r u located?

01-26-2005, 11:05 PM	#7
saulgoode Registered User Join Date: Dec 2003 Location: Houston Posts: 388	Sorry I don't have a top for ya, but are you trying to repair your top or do you have some project in the works? Saulgoode

01-27-2005, 10:06 AM	#8
mister.freeze Registered User Join Date: Dec 2003 Location: Houston, TX Posts: 733	Project. That part would be just a bit too tough to fab. Ultimately, I'll have a 2-piece hard top that will weigh less than 100 pounds. __________________ '72 K5, known as 'the Fox.'

01-27-2005, 09:16 PM	#9
MAC67 " SHOW ME" Join Date: Jan 2003 Location: shelbyville illinois Posts: 2,624	i was wantong to do something similiar but cut it off right behind the door openings then fab in the back of a pick up cab to make my own halftop ,

01-29-2005, 10:47 PM	#10
6T8 Active Member Join Date: Dec 2004 Location: Tucson, AZ Posts: 233	There is one on e-bay! Look under 1972 Blazer all categories. Bid at $5 Front of top looks good tree fell on back. Owner will probably cot off what you need. Would be easy to ship then

01-30-2005, 12:51 AM	#11
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Linky __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.