SOLID!!!!1984 c10 shortbed fleetside truck for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

truckman32 · 01-22-2005, 05:41 PM

well i have decided to sell my 84 chevy c10 2wd short bed fleet side truck. 350. engine should be a 4 bolt main but not sure maybe a 2 bolt, but engine, runs fine 70,000 original miles reason i know is it came out of my uncles farm truck when he sold his farm i also have a set of dubble hump heads that i was going to put on the engine which there is nothing wrong with the ones in place but the dubble humps have 202 valves so more power,tranny is a original th-250 3 speed auto,but truck comes with a extra th-350 tranny, the tranny that is in the truck now shifts fine just needs rear seal, leaks a little if your parked uphill, electric cooling fan to keep it running cool and added a little HP, body is solid with some rust over rear wheel wells not bad though, tailgate is solid with some small dents from loading junk when i cleaned my uncles farm up for the engine, inside bed is solid no rust threw, front bed bulkhead has a bow in it, reason, used it to move with and had to push on the tailgate to get it to shut with to much length of stuff loaded, rear bumper isn't chrome just gray, but solid.the doors are good, just have some peeling places in them from small dents that were not filled right, no rust or rot on the doors, truck has manual windows driverside rolls fine pass side is off track but with some muscle you can roll it up, dash isn't much to look at, seat is cloth color is red, i have new gray carpet for the truck not installed, rear sliding glass, truck has tinted windows also, driver side floor and kick panel needs replaced but i have both of them just haven't tacked them in yet, the rest of the cab is fine, floor supports are solid as a rock so no worry there, frame is rot free solid everywhere which is hard to find on these trucks, front clip is fine with new driver side fender but needs painted better to blend in, no cracks in the grille, nice front chrome bumper no rust, 15x8 aluim wheels with new Dayton sr 235/60 tires, all lights work fine, new shocks, heater works, new quad carb, would make a good truck to lay frame on bags, with some 22"s or drive the way it is. i have'nt had any problems with the truck, i use to drive it back and forth to work everyday until i purchased a 4 cylinder truck because of gas prices, I have told you everything i can think of about my truck over all it runs out fine with plenty of power no knocks or smoke oil changed every 2000 miles, I have added all the pictures i have at the moment, I priced to sell , $1500.00 firm i have decide to go to collage so i won't have time to fix it the way i want, after a week on here it's going on ebay

--------------------------------------------------------------------------------

**smokinn** · 01-22-2005, 06:54 PM

Good luck on the sale. If I was closer id buy it. If you end up on ebay again put a reserve and dont let anyone come over to look at it with out the cops standing by.

Sorry could'nt resist.

truckman32 · 01-22-2005, 07:15 PM

ttt

phantom dually · 01-23-2005, 12:09 AM

Take it your not going to be in need of the cab and clip??

truckman32 · 01-23-2005, 06:25 AM

Quote:

Originally Posted by phantom dually

Take it your not going to be in need of the cab and clip??

at this point i just don't know phantom,i want to go to collage since i never had a chance before with 2 kids that i had to take care of. the job i have now is not what i want to do for the rest of my life, i drive a yard truck .but i want to get into something with more pay, so my kids can go to a good collage,the cab and clip: i was wanting your cab because it is a a/c cab and the newer style clip looks cool on these trucks,but why don't you just buy my truck man that would perfect for your next project you have everything to lower it,and that big block would be perfect for this truck,i will even have a set of 20's in the next couple of months i will sell seperate to who ever buys my truck,later,,,,truckman

muddyole 69 · 01-23-2005, 08:07 AM

I would like some pics of the rusted areas please send them to deerfieldKAM@hotmail.com thanks maybe we can work something out Mike

truckman32 · 01-23-2005, 08:57 AM

Quote:

Originally Posted by muddyole 69

I would like some pics of the rusted areas please send them to deerfieldKAM@hotmail.com thanks maybe we can work something out Mike

i will post some pictures of the rusted places as soon as it warms up some it is really cold outside and i don't have a garage, but it's not bad just rust over rear wheel wells and floor board and kick panel need replaced and i have them both

Blue Beard · 01-23-2005, 08:59 AM

What are the wheels from...?

truckman32 · 01-24-2005, 12:12 AM

Quote:

Originally Posted by truckman32

i will post some pictures of the rusted places as soon as it warms up some it is really cold outside and i don't have a garage, but it's not bad just rust over rear wheel wells and floor board and kick panel need replaced and i have them both

THE SALE OF THIS TRUCK IS ON HOLD FOR NOW I MIGHT NOT HAVE TO SELL I'M LOOKING INTO FINANCIAL AID FOR COLLAGE AND I CAN DO IT AT HOME,

truckman32 · 01-30-2005, 08:53 AM

Quote:

Originally Posted by truckman32

THE SALE OF THIS TRUCK IS ON HOLD FOR NOW I MIGHT NOT HAVE TO SELL I'M LOOKING INTO FINANCIAL AID FOR COLLAGE AND I CAN DO IT AT HOME,

truck is up for sale i will sell it with out the extra tranny,tool box and dubble hump heads,for 1200.00 firm

01-22-2005, 05:41 PM	#1
truckman32 AND HOLDING ON TO THE C10 Join Date: Jan 2003 Location: MT.STERLING,KY Posts: 390	SOLID!!!!1984 c10 shortbed fleetside truck for sale well i have decided to sell my 84 chevy c10 2wd short bed fleet side truck. 350. engine should be a 4 bolt main but not sure maybe a 2 bolt, but engine, runs fine 70,000 original miles reason i know is it came out of my uncles farm truck when he sold his farm i also have a set of dubble hump heads that i was going to put on the engine which there is nothing wrong with the ones in place but the dubble humps have 202 valves so more power,tranny is a original th-250 3 speed auto,but truck comes with a extra th-350 tranny, the tranny that is in the truck now shifts fine just needs rear seal, leaks a little if your parked uphill, electric cooling fan to keep it running cool and added a little HP, body is solid with some rust over rear wheel wells not bad though, tailgate is solid with some small dents from loading junk when i cleaned my uncles farm up for the engine, inside bed is solid no rust threw, front bed bulkhead has a bow in it, reason, used it to move with and had to push on the tailgate to get it to shut with to much length of stuff loaded, rear bumper isn't chrome just gray, but solid.the doors are good, just have some peeling places in them from small dents that were not filled right, no rust or rot on the doors, truck has manual windows driverside rolls fine pass side is off track but with some muscle you can roll it up, dash isn't much to look at, seat is cloth color is red, i have new gray carpet for the truck not installed, rear sliding glass, truck has tinted windows also, driver side floor and kick panel needs replaced but i have both of them just haven't tacked them in yet, the rest of the cab is fine, floor supports are solid as a rock so no worry there, frame is rot free solid everywhere which is hard to find on these trucks, front clip is fine with new driver side fender but needs painted better to blend in, no cracks in the grille, nice front chrome bumper no rust, 15x8 aluim wheels with new Dayton sr 235/60 tires, all lights work fine, new shocks, heater works, new quad carb, would make a good truck to lay frame on bags, with some 22"s or drive the way it is. i have'nt had any problems with the truck, i use to drive it back and forth to work everyday until i purchased a 4 cylinder truck because of gas prices, I have told you everything i can think of about my truck over all it runs out fine with plenty of power no knocks or smoke oil changed every 2000 miles, I have added all the pictures i have at the moment, I priced to sell , $1500.00 firm i have decide to go to collage so i won't have time to fix it the way i want, after a week on here it's going on ebay -------------------------------------------------------------------------------- Attached Images __________________ 66 swb/ss chevy c10 SOLD 62 swb/fs chevy c10 :p SOLD 84 swb/fs chevy c10 91 sdime 383/th350

01-22-2005, 07:15 PM	#3
truckman32 AND HOLDING ON TO THE C10 Join Date: Jan 2003 Location: MT.STERLING,KY Posts: 390	ttt __________________ 66 swb/ss chevy c10 SOLD 62 swb/fs chevy c10 :p SOLD 84 swb/fs chevy c10 91 sdime 383/th350

01-23-2005, 12:09 AM	#4
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Take it your not going to be in need of the cab and clip?? __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

01-23-2005, 08:07 AM	#6
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	swb I would like some pics of the rusted areas please send them to deerfieldKAM@hotmail.com thanks maybe we can work something out Mike __________________ hav'n fun be'n me

01-23-2005, 08:59 AM	#8
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	What are the wheels from...? __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

01-22-2005, 06:54 PM	#2
smokinn Senior Member Join Date: Aug 2002 Location: omaha,Ne Posts: 617	Good luck on the sale. If I was closer id buy it. If you end up on ebay again put a reserve and dont let anyone come over to look at it with out the cops standing by. Sorry could'nt resist.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.