Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
01-23-2005, 12:17 PM | #1 |
Registered User
Join Date: Jun 2004
Posts: 31
|
Parting out 1972 K5 Blazer
Hi all,
I have a 1972 Blazer with a clear title that I bought about 6 months ago to do a full restoration. My job situation has changed (for the better) and I am not able to continue this project for now. Everything is in a warehouse in Del Rio, TX. I am not currently in Del Rio, so I only have the pictures that I have. Also, it will take some time and coordination to get out to Del Rio to arrange shipping or pickup of the parts. This is what I have: 1972 Blazer tub on a rotisserie- rockers are gone, and a little rust to the bottom of the bedsides, there is a dent to the left bedside. The tub comes with new inner and outer rockers and 4 bedside repair panels that cover the full bedsides. It also needs a few small patches here and there, but the floors are solid with the exception of the last few inches of the bed floor. I also have repair panels to fix that as well. It has an A/C dash. The radio opening unfortunately was hacked on by the previous owner. Frame that has been blasted and painted with Eastwood rust inhibiter primer and then covered with Eastwood Chassis black. Looks great. Frame is straight. The crossmembers have not been blasted or painted yet. I have both doors with all of the mechanicals still inside. both doors have some rust on lower edges. I also have a tailgate in overall good shape with a little rust on the lower inside edge. Doube wall top in good condition. Needs to be refinished and the liftgate has a crack on the inside where the T-handle goes through (I think this is pretty common). Glass is excellent. I have all of the running gear including: 350 V8, Turbo 350 tranny, NP205 transfer case, front and rear driveshafts, Dana 44 front, and 12 bolt rear. Both axles are dissasembled. The rear has posi. I also have 4 original leaf springs. I also have a couple of extra things such as a 400ci short block, steel heads for the 400, and aluminum intake. This is what I don't have: Gas tank, bumpers, seats (although I do have the front brackets), console, hood, front fenders (inner or outer), shocks, fuel and brake lines. If you need anything that I am not thinking of, let me know and we will work out a price. As for what I do know: Tub w/rotisserie and patch panels- $1000 (rotisserie alone cost $600 to build) Frame w/ crossmembers-$300 Small block 350 (probably original engine) - $250 Double wall top - $250 Make offers on everything else. EVERYTHING IS DISSASEMBLED. THIS INCLUDES AXLES. KEEP IN MIND IT MAY TAKE A FEW WEEKS BEFORE I CAN MAKE IT OUT TO DEL RIO AND PICK IT ALL UP. I DO HAVE A CONTACT OUT THERE WHO WILL BE WILLING TO HELP IF YOU'D LIKE TO PICK ANYTHING UP, BUT I AM NOT GOING TO MAKE HIM PACK AND SHIP ANYTHING, SO PLEASE BE PATIENT. I have some digital pics on my computer, so if you'd like pictures of anything, I will see what I have. Please email me at mikeperez22@hotmail.com or shoot me a PM with pic requests or offers. Thanks. |
01-23-2005, 01:24 PM | #2 |
SKINNY TIRES RULE!
Join Date: Sep 2001
Location: Bothell, WA
Posts: 11,038
|
How much for the front seat brackets?
__________________
bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L |
01-23-2005, 05:11 PM | #3 |
Registered User
Join Date: Jun 2004
Posts: 31
|
I'll take $25 bucks plus shipping. It is going to be a two to three weeks before I can get out to Del Rio and ship them. Let me know.
|
01-23-2005, 05:19 PM | #4 |
Registered User
Join Date: Nov 2001
Location: Concord, NC
Posts: 2,488
|
How much for the liftgate off the top? How much for the tailgate?
|
01-23-2005, 06:00 PM | #5 |
Active Member
Join Date: Dec 2004
Location: NJ
Posts: 6,460
|
Please put me next in line for the seat brackets if bouncy passes.
|
01-23-2005, 06:06 PM | #6 |
Registered User
Join Date: Jun 2004
Posts: 31
|
I don't really want to separate the liftgate off of the top because I don't think anyone would want just the top. I will make an exception for $200, but I'd rather keep together. You are second in line on the tailgate. I'll email the other guy and make sure he wants it. Otherwise, you can have it for $75 plus shipping.
|
01-23-2005, 07:31 PM | #7 |
The LuvShack Garage
Join Date: Jan 2004
Location: Maple Grove, TN (West Side)
Posts: 30,468
|
JACK W/ HOLD DOWN SPRINGS / CLIPS
TIRE IRON W/ HOLD DOWN SPRINGS / CLIPS CONDITION / PIC'S OF THE ABOVE ITEMS
__________________
Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T |
01-23-2005, 07:45 PM | #8 |
Registered User
Join Date: Jun 2004
Posts: 31
|
Sorry,
The jack and spring were not installed when I bought the truck. |
01-23-2005, 08:36 PM | #9 |
Registered User
Join Date: Oct 2004
Location: Piedmont of North Carolina
Posts: 194
|
Brackets for holding rear panels in place?
__________________
thekidd 95 Silverado 2000 Suburban 4x4 91 Nissan 4x4 65 Impala SS (Mom and Dads now mine) 1971 K5 Blazer(Father and son project) 1972 2WD Blazer |
01-23-2005, 08:40 PM | #10 |
Registered User
Join Date: Jan 2005
Posts: 4
|
what is the condition of the top do you have photos?
|
01-23-2005, 10:49 PM | #11 |
Registered User
Join Date: Jun 2004
Posts: 31
|
Kidd,
I do have the brackets. I'll take $25 for all of them plus shipping. Bakersfield, PM me your email address and I'll send you pictures. It is in good shape overall. It needs to be refinished and the crack in the tailgate needs to be repaired, but it is solid overall with good glass. |
01-23-2005, 11:15 PM | #12 |
Registered User
Join Date: Oct 2004
Location: Piedmont of North Carolina
Posts: 194
|
Pmed ya.
__________________
thekidd 95 Silverado 2000 Suburban 4x4 91 Nissan 4x4 65 Impala SS (Mom and Dads now mine) 1971 K5 Blazer(Father and son project) 1972 2WD Blazer |
01-23-2005, 11:20 PM | #13 | |
The LuvShack Garage
Join Date: Jan 2004
Location: Maple Grove, TN (West Side)
Posts: 30,468
|
Quote:
REACHING DEEP HERE, TOW HOOKS
__________________
Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T |
|
01-23-2005, 11:35 PM | #14 |
Registered User
Join Date: Jun 2004
Posts: 31
|
No tow hooks. Sorry.
|
01-24-2005, 01:11 AM | #15 |
Registered User
Join Date: Nov 2004
Location: Nebraska
Posts: 762
|
Do you have the spare tire bracket that bolts behind the rear seat? If so, how much?
|
01-24-2005, 08:38 AM | #16 |
Registered User
Join Date: Jun 2004
Posts: 31
|
Sorry, no tire bracket. Wasn't installed when I purchased it.
|
01-24-2005, 09:57 AM | #17 |
User #12137
Join Date: Apr 2004
Location: kingsport,upper east tenn
Posts: 11,598
|
how about the tailgate seals and metal hold downs for them and the hatch stop, its the part on top of the tailgate that stops the hatch from going in to far you got those ?
|
01-24-2005, 10:07 AM | #18 |
'71 Chevy Blazer
Join Date: Jan 2005
Location: San Leandro, CA (near Oakland)
Posts: 96
|
hi, congratulations on the new job... if you have them, how much for the brackets that hold down the rear seat? i'd like those if possible.
__________________
'71 K5 Blazer (new project / daily driver) "If you are not working to improve the situation, you have no business complaining" |
01-24-2005, 01:09 PM | #19 |
Account Suspended
Join Date: Nov 2004
Location: Deer Park, Tx.
Posts: 2,522
|
I am interested in maybe the rotisserie that your blazer tub is on. Do you have that for sale by itself. Let me know. Thanks
|
01-24-2005, 01:32 PM | #20 |
SKINNY TIRES RULE!
Join Date: Sep 2001
Location: Bothell, WA
Posts: 11,038
|
PM sent.
__________________
bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L |
01-24-2005, 10:46 PM | #21 |
Registered User
Join Date: Jun 2004
Posts: 31
|
I don't have the any of the tailgate hardware or any of the brackets for the rear seats. Skii - I think you are number 2 for the posi-trac. I haven't heard anything for certain from the other guy. I'll let the posi go for $100.
72CST - I built the rotisserie and it is set up for a blazer tub. I'll let it go for $500. It will have to be picked up. It is extremely large and heavy. |
01-25-2005, 12:36 PM | #22 |
Account Suspended
Join Date: Nov 2004
Location: Deer Park, Tx.
Posts: 2,522
|
Mike perez, I am interested in the rotisserie. Do you have any pictures of it possibly so I can see it and how hight the blazer tub sits on it when mounted. Email me pictures at cbernal1972@hotmail.com
|
01-26-2005, 09:56 AM | #23 |
Account Suspended
Join Date: Nov 2004
Location: Deer Park, Tx.
Posts: 2,522
|
Mike I want the rotisserie. Let me know what weekend you can be to your place so I can make plans to drive out and pick it up. It will fit on a trailer correct? You can email me again at the previous email address. Thank you.
|
01-26-2005, 03:14 PM | #24 |
< 69 Blazer
Join Date: Mar 2004
Location: Nevada, TX
Posts: 292
|
Put me next in line for the posi carrier. What gear ratio is in it?
.... sounds like someone else is gonna get it anyway. how much for the 400sb? |
01-26-2005, 08:24 PM | #25 |
Registered User
Join Date: Jul 2004
Location: Turlock, Ca
Posts: 578
|
Price and condition on console, radio, outer grille, and all seatbelts.
Thanks, Bret
__________________
71 Custom 20 Deluxe..soon to be SWB 1/2 ton 1 incredible wife 2 great kids |
Bookmarks |
|
|