1984 454 with TH400 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dapolice1 · 02-10-2005, 06:17 AM

I have a 1984 Passenger block 454 and TH400 setup. I stabbed it in my 84 Dually and have changed my mind to go a diffrent route. This engine has a new high valume Mellig M77v oil pump, new water pump (and an older one that still works newer one installed), new A/C brakets for the old A6 A/C compressor, A set of headers that need some spots welded around the flange, and a reman edelbrock 750 (it has not seen fuel but is showing corrosion from sitting out but covered).

It has a fuelpump block off plate, but I have a new carter pump and rod. The heads are oval port standard heads. I also have an alternator, and 2 starters (one is a high torque factory case unit). The trans is a TH400 built heavily and I have a new filter and gasket kit as well as some trans fluid. I replaced the front seal before I mounted it to the engine. I also installed a NEW Poly trans mount that is included in the price. This engine ran like a scalded ape when I pulled it from the other truck. I am asking $800.00 for this engine and trans setup. $700 for just the engine...

All prices are best offer and I am only wanting local pickup in the austin san antonio area right now. I will drive for a fee to be discussed. Guys I can not stresss enough, as anyone who has delt with me this WILL NOT LAST LONG. I am very negotiable and MUST move this..

phantom dually · 02-10-2005, 09:49 PM

This is a very good deal as I paid more than this for my long block needing rebuild!! BUMP FOR YA!!

dapolice1 · 03-04-2005, 06:39 PM

BTT with lower price.

$800 for it all you come get it.
As always open to offers. This must go.
A few members working on getting cash up, but nothing firm yet.

dapolice1 · 06-08-2005, 04:01 PM

Sold to ItsNotABlazer..
Great guy would do business again..

phantom dually · 06-08-2005, 09:57 PM

Congrats!!

02-10-2005, 06:17 AM	#1
dapolice1 We can roll all Day!! Join Date: Jul 2003 Location: Austin, Tx. Posts: 165	1984 454 with TH400 I have a 1984 Passenger block 454 and TH400 setup. I stabbed it in my 84 Dually and have changed my mind to go a diffrent route. This engine has a new high valume Mellig M77v oil pump, new water pump (and an older one that still works newer one installed), new A/C brakets for the old A6 A/C compressor, A set of headers that need some spots welded around the flange, and a reman edelbrock 750 (it has not seen fuel but is showing corrosion from sitting out but covered). It has a fuelpump block off plate, but I have a new carter pump and rod. The heads are oval port standard heads. I also have an alternator, and 2 starters (one is a high torque factory case unit). The trans is a TH400 built heavily and I have a new filter and gasket kit as well as some trans fluid. I replaced the front seal before I mounted it to the engine. I also installed a NEW Poly trans mount that is included in the price. This engine ran like a scalded ape when I pulled it from the other truck. I am asking $800.00 for this engine and trans setup. $700 for just the engine... All prices are best offer and I am only wanting local pickup in the austin san antonio area right now. I will drive for a fee to be discussed. Guys I can not stresss enough, as anyone who has delt with me this WILL NOT LAST LONG. I am very negotiable and MUST move this.. Last edited by dapolice1; 03-04-2005 at 06:41 PM.

02-10-2005, 09:49 PM	#2
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	This is a very good deal as I paid more than this for my long block needing rebuild!! BUMP FOR YA!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

06-08-2005, 09:57 PM	#5
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Congrats!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

03-04-2005, 06:39 PM	#3
dapolice1 We can roll all Day!! Join Date: Jul 2003 Location: Austin, Tx. Posts: 165	BTT with lower price. $800 for it all you come get it. As always open to offers. This must go. A few members working on getting cash up, but nothing firm yet.

06-08-2005, 04:01 PM	#4
dapolice1 We can roll all Day!! Join Date: Jul 2003 Location: Austin, Tx. Posts: 165	Sold to ItsNotABlazer.. Great guy would do business again..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.