Headers for a 78 blazer - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Big Blue · 02-27-2005, 04:01 PM

Just looking to find a set of headers for a 78 blazer 4x4 350.
I looked on ebay but can't seem to see the ones that would fit.
I don't want to put something on that will show the pipes. You know the one that you see when you don't tuck up under the frame.

Thanks Big Blue ( john )

pedrofixlater · 03-05-2005, 11:19 AM

Try a set of flowtech headers, not to expensive, they also have the complete dual exhaust pipe kit whick is is on the holly web site. Advance autoparts sells the headers for 89.00 and the pipe kit for 89.00 go to advance autoparts.com and check it out. the only pipe kit from flowtech is for 4X4 trucks, dynomax makes kits for 4X2's and 4X4's for a little bit more.

phantomslinger · 03-05-2005, 11:43 PM

go to summitracing.com they have great price rang on most stuff try hooker heades there not to bad run you like 100 to 250 in price

Big Blue · 03-06-2005, 01:25 AM

Thanks phantomslinger and pedrofixlater , I just pick up a parts truck this past weekend and it has a 350 with headers. Look pretty good so maybe I'll take them off and put hem on the blazer.

Thanks Again, John

updatelee · 03-18-2005, 09:03 PM

Ive got a set of cheap headers, they allways leaked, bought a set of those 'dead-soft aluminum' header and collector gaskets, never had a problem again. not only do they not leak, I dont have to replace them every 6 months.

*1FaastC10* · 03-18-2005, 09:21 PM

Flowtech headers kick ass for stock to very mild engines. good fit, great price, and most chain stores not only stock them, but offer a lifetime warranty too.

02-27-2005, 04:01 PM	#1
Big Blue Registered User Join Date: Feb 2005 Location: Northeast--Bethlehem, Pennslyvania Posts: 642	Headers for a 78 blazer Just looking to find a set of headers for a 78 blazer 4x4 350. I looked on ebay but can't seem to see the ones that would fit. I don't want to put something on that will show the pipes. You know the one that you see when you don't tuck up under the frame. Thanks Big Blue ( john ) __________________ Big Blue ( John ) 79 Chevy Pick up.....My Dailey STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in.

03-06-2005, 01:25 AM	#4
Big Blue Registered User Join Date: Feb 2005 Location: Northeast--Bethlehem, Pennslyvania Posts: 642	Thanks phantomslinger and pedrofixlater , I just pick up a parts truck this past weekend and it has a 350 with headers. Look pretty good so maybe I'll take them off and put hem on the blazer. Thanks Again, John __________________ Big Blue ( John ) 79 Chevy Pick up.....My Dailey STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in.

03-05-2005, 11:19 AM	#2
pedrofixlater 75 STEPSIDE Join Date: Mar 2005 Location: Suffolk, VA Posts: 92	Try a set of flowtech headers, not to expensive, they also have the complete dual exhaust pipe kit whick is is on the holly web site. Advance autoparts sells the headers for 89.00 and the pipe kit for 89.00 go to advance autoparts.com and check it out. the only pipe kit from flowtech is for 4X4 trucks, dynomax makes kits for 4X2's and 4X4's for a little bit more.

03-05-2005, 11:43 PM	#3
phantomslinger Registered User Join Date: Mar 2005 Location: eagle point OR Posts: 28	go to summitracing.com they have great price rang on most stuff try hooker heades there not to bad run you like 100 to 250 in price

03-18-2005, 09:03 PM	#5
updatelee Registered User Join Date: Feb 2004 Location: Lancaster Park, AB Posts: 38	Ive got a set of cheap headers, they allways leaked, bought a set of those 'dead-soft aluminum' header and collector gaskets, never had a problem again. not only do they not leak, I dont have to replace them every 6 months.

03-18-2005, 09:21 PM	#6
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	Flowtech headers kick ass for stock to very mild engines. good fit, great price, and most chain stores not only stock them, but offer a lifetime warranty too.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.