|
|
|
03-20-2005, 11:56 AM
|
#1 |
|
Robert Olson Transport
 
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,310
|
trans question
OK duh i found out the trans in my truck is not a th 350 but in fact a th400
The casing on the trans that came out of the truck has raised lettering HD on it. Im putting in a junkyard trans and the one they handed me ( before i got mine out of the truck) was a short tail with the raised marking 4 on the bell housing. In addition the driveshaft yoke was bolted to the output shaft. I was told that the driveshaft i have ( slip on) will still work but the problem i have now is the tailshaft. Is it possible to just unbolt the tailshafts to convert the short tail to a long tail trany? what is the difference between the HD stamp and the 4 stamp? thanks in advance!
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
|
|
|
03-20-2005, 01:14 PM
|
#2 |
|
What I drive
Join Date: Apr 2004
Location: Star, MS
Posts: 418
|
I think on the tail shaft issue you have to change the housing and output shaft requiring going thru the tranny. Not sure about the stamp issue. I would carry it back and get one with the correct tail shaft. Or rebuild your old one if $$ allows. I had a th350 rebuilt locally by a guy who builds race cars for $350 that included a new convertor, and shift kit. I think the 400 may be a little higher but not much.
__________________
1986 Chevy Crew Cab Dually(Choo-Choo Conversion) 2006 Chevy Equinox |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
