cab and chassis or dually? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bagged01extcab · 03-23-2005, 12:31 AM

I just bought an 85 4 door crew cab 1 ton with a work bed on it, and was trying to determine if it was a dually or a cab & chassis. How can I tell the difference? The brake hubs are right up next to the spring perchs, and It looks like the outer wheels stick out past the rest of the body, but I'm still unsure! Maybe someone has some deminsions or something! Any help is appreciated!

Thanks

loweredd · 04-21-2005, 06:59 PM

Call a Chevy dealer and have them run the VIN. That will tell you.

badone07 · 04-21-2005, 08:56 PM

I have an 84 crewcab cab & chassis with dually set up. Sounds like you have the same, by your discription. I looked up VIN codes and didn't say either way within our years. Anyway, the measurement between the inner wheels is about 45 inches. Mine was a stake bed that I replaced with a fleetside LWB bed. Had to put 2" lift blocks between springs and rear for wheel well clearance, instead of minitubs. Outter wheel treads are completely within the wheelwells. A couple of pics here... http://207.44.196.117/vboard/showthread.php3?t=126946

*1FaastC10* · 05-01-2005, 02:43 AM

C&C will have a 14 bolt Full Floater (extra narrow) so it will be just as wide as the front axle. a Dually pickup will have a Dana 70 in it, and will be considerably wider than the front axle. the easiest way to identify the axles are the cover bolts, the 14 bolt will obviously have 14, and the Dana 70 will have 10. also, the 14 bolt has a bolt in pinion housing.

03-23-2005, 12:31 AM	#1
bagged01extcab Registered User Join Date: Jun 2004 Location: Longview tx Posts: 270	difference between cab & chassis and dually? I just bought an 85 4 door crew cab 1 ton with a work bed on it, and was trying to determine if it was a dually or a cab & chassis. How can I tell the difference? The brake hubs are right up next to the spring perchs, and It looks like the outer wheels stick out past the rest of the body, but I'm still unsure! Maybe someone has some deminsions or something! Any help is appreciated! Thanks __________________ Trey Oney Last edited by bagged01extcab; 03-23-2005 at 10:20 PM.

04-21-2005, 08:56 PM	#3
badone07 Project 2 Resume Join Date: May 2004 Location: Jim Thorpe, PA Posts: 884	I have an 84 crewcab cab & chassis with dually set up. Sounds like you have the same, by your discription. I looked up VIN codes and didn't say either way within our years. Anyway, the measurement between the inner wheels is about 45 inches. Mine was a stake bed that I replaced with a fleetside LWB bed. Had to put 2" lift blocks between springs and rear for wheel well clearance, instead of minitubs. Outter wheel treads are completely within the wheelwells. A couple of pics here... http://207.44.196.117/vboard/showthread.php3?t=126946 __________________ John 1984 C30 Chevy Crew Cab Dually 1998 Jeep Cherokee 4x4 2004 Chevy Trailblazer 4x4 (wife's) 1970 Mustang FB fully tubed (getting 521 BBF & powerglide) 1978 Nova 2dr (going BBCaddy & S.P. th400) 1984 Monte SS (circle track car)

04-21-2005, 06:59 PM	#2
loweredd www.loweredd.com Join Date: Aug 2002 Location: Struble IA Posts: 808	Call a Chevy dealer and have them run the VIN. That will tell you.

05-01-2005, 02:43 AM	#4
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	C&C will have a 14 bolt Full Floater (extra narrow) so it will be just as wide as the front axle. a Dually pickup will have a Dana 70 in it, and will be considerably wider than the front axle. the easiest way to identify the axles are the cover bolts, the 14 bolt will obviously have 14, and the Dana 70 will have 10. also, the 14 bolt has a bolt in pinion housing.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.