WTB: Gear shift lever - The 1947 - Present Chevrolet & GMC Truck Message Board Network

beenydu · 04-02-2005, 04:03 PM

I DID IT!!!! I BROKE IT!! Well, I guess too much of the upper arm could be hazardous to the health of a gear shift lever.

Well, Can I get some offers? I need one to get back going.

*Randy70C-10* · 04-02-2005, 04:07 PM

I have one, hang on and I'll fing a pic....BRB

*Randy70C-10* · 04-02-2005, 04:13 PM

Here ya go, the top one I still have, $10 shipped to your door!!

beenydu · 04-02-2005, 04:17 PM

Randy,

It looks like the end on the two of them are different. Are they?

*Randy70C-10* · 04-02-2005, 04:21 PM

Yes, they are different years. You have to find out if the one on the top is the same as yours.

beenydu · 04-02-2005, 04:23 PM

Alright, I will look and see if that will work. I will PM you and let you know either way.

Robert1970C20rstbukt · 04-02-2005, 09:04 PM

I don't know if it will help but the one on top is the same one that's in my '70 auto non-tilt, it should be the same for a 3 on-the-tree too.

70c10 · 04-03-2005, 02:10 AM

The top one looks like a 71-72 to me.

*Randy70C-10* · 04-03-2005, 09:39 AM

I've parted out so many trucks that I honestly don't remember what it came out of. Everything I've had has been 69-72 (no 67 or 68's) but now that I think about it I believe that it may have came out of my old 72 Custom-10.

04-02-2005, 04:03 PM	#1
beenydu Got Jesus? Join Date: Apr 2004 Location: Ninety Six, SC Posts: 53	WTB: Gear shift lever I DID IT!!!! I BROKE IT!! Well, I guess too much of the upper arm could be hazardous to the health of a gear shift lever. Well, Can I get some offers? I need one to get back going.

04-02-2005, 09:04 PM	#7
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	I don't know if it will help but the one on top is the same one that's in my '70 auto non-tilt, it should be the same for a 3 on-the-tree too. __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck

04-03-2005, 02:10 AM	#8
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	The top one looks like a 71-72 to me. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

04-02-2005, 04:07 PM	#2
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	I have one, hang on and I'll fing a pic....BRB

04-02-2005, 04:13 PM	#3
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Here ya go, the top one I still have, $10 shipped to your door!!

04-02-2005, 04:17 PM	#4
beenydu Got Jesus? Join Date: Apr 2004 Location: Ninety Six, SC Posts: 53	Randy, It looks like the end on the two of them are different. Are they?

04-02-2005, 04:21 PM	#5
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Yes, they are different years. You have to find out if the one on the top is the same as yours.

04-02-2005, 04:23 PM	#6
beenydu Got Jesus? Join Date: Apr 2004 Location: Ninety Six, SC Posts: 53	Alright, I will look and see if that will work. I will PM you and let you know either way.

04-03-2005, 09:39 AM	#9
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	I've parted out so many trucks that I honestly don't remember what it came out of. Everything I've had has been 69-72 (no 67 or 68's) but now that I think about it I believe that it may have came out of my old 72 Custom-10.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.