I'm new and have questions about 72 c-10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

oldblue72 · 04-15-2005, 05:41 PM

I am new to the message board. I live in a tiny town in southern California. My great grandfather bought a truck when it was new in 1972 and it's been in my family ever since. I love the darn thing. It's a custom deluxe 10. It has the original paint (blue two-tone) and is in pretty good condition. It has the 350 engine and is a longbed. I'll try and get some pictures of it. I use it everyday around town. The transmission could be rebuilt but it doesn't give me much trouble. I learned some general stuff like changing oil, changing tranny fluid, sparks, points, and things like that. Just enough to keep it running. But I want to know more. How much does a tran rebuild cost? How much does the truck weigh? Where can I find a bench seat that looks like the original (blue plaid w/ some white detailed vinyl)? How much is it worth? I believe it has mostly original parts in it. There isn't rust to speak of. Some brick red primer shows in the bed (only in the bed and only a bit). The body is in excellent condition. The only paint problem is on the hood. It has some discoloration (cream color) I think it's from years of chemicals or gases coming from the under the hood. The engine was probably worked on by my uncle but not replaced. I'd love to hear any general information about the truck and feel free to ramble on. Every time a see a picture of a truck that looks like mine on the forum my heart starts beating faster. I get a real kick out of 'em. Remember, I am only 17 and l'm still learning so don't assume I know what every part is. Thanks for any info you have.

TRUCKGUY · 04-15-2005, 05:51 PM

welcome to the board from ky,....far as how much does it wiegh check your vin plate or you could go to a truck stop and use a set of there scales...

jesgord · 04-15-2005, 06:27 PM

If the original seat is white w/blue plaid inserts, sounds like you have the highlander package in your truck....very cool interior package. Welcome to the board from another newbie

oldblue72 · 04-15-2005, 06:49 PM

The seat is in medium condition. About what you would expect. minor tears around the edges. I refuse to put a cheap seat cover on it though. Does your truck have the highlander package? It is pretty sweet how the paint matches the seat.

**pjmoreland** · 04-15-2005, 06:57 PM

Your truck probably weighs somewhere in the 3400-3600 lb. range.

MARIOS68PANEL · 04-15-2005, 07:40 PM

Welcome from a nor cal new guy

68w/sbc406 · 04-15-2005, 08:11 PM

my 68 long fleet w/ a V8 2WD and auto transweighs 3900-4000 depending on how much gas and what i have in it. welcome to the boards

Rod · 04-15-2005, 08:35 PM

Welcome to the 67-72 boards.

jhwkns · 04-15-2005, 08:43 PM

Welcome aboard!

oldblue72 · 04-15-2005, 09:07 PM

Why is it that people peel off the metal that separates the tones and paint it all one color? I love the way the originals look. Is it just a matter of preference? Oh, and where is a place I can get stock parts or nice repos. I feel like I ask for the impossible but I can't stand the idea of putting modern crap on a classic

TRUCKGUY · 04-15-2005, 09:39 PM

stock parts? as in what fenders body parts?...they make all of them new they look the same also,.....and some trucks did not come with the 2 tone,and then some people want theirs without the side moldings.....like the way i am wanting to do mine it would look bad with them,my opinion,......but you build the truck the way you want it not the way some one else wants it......and the original,oldskool trucks look awsome,....but i am wanting to go a different way with mine,......if all of our year trucks were 2 tone there wouldnt be much to choose from........and as far as parts i would try here first on the parts board great place!....

68w/sbc406 · 04-16-2005, 02:05 AM

Quote:

Originally Posted by oldblue72

Why is it that people peel off the metal that separates the tones and paint it all one color? I love the way the originals look. Is it just a matter of preference? Oh, and where is a place I can get stock parts or nice repos. I feel like I ask for the impossible but I can't stand the idea of putting modern crap on a classic

not all trucks came with those moldings. there are stock one color trucks and also different style of two tone trucks

Brainchild · 04-16-2005, 03:31 AM

There are some vendors that hang out here,and also used stuff on the parts boards.You'll be able to find everything you need to get the truck back into shape.

Welcome to the boards from MO.

Anyone with pics of a Highlander Interior,I'm curious myself about that one.

**Yukon Jack** · 04-16-2005, 08:19 AM

Welcome to the board. Like said, you will find some great vendors on this board. This is a board that doesn't mind any type of question, simple or hard, they all will get answered. Good to see another young person show an interest in these classics - they are pretty special to all of us!

Uh, any pics of your truck?

oldblue72 · 04-19-2005, 06:33 PM

I'm hoping to get some pictures on the web by this weekend. I just noticed something on my truck that is very simple but I notice it. The fake wood strip that sits just below the lower molding (about an 1.5'' wide) is discolored and cracked. I want new strips if I could find some. Could I get that at a general parts store? Is it something I could put on myself?

z7199 · 04-19-2005, 06:43 PM

Quote:

Originally Posted by oldblue72

Why is it that people peel off the metal that separates the tones and paint it all one color? I love the way the originals look. Is it just a matter of preference? Oh, and where is a place I can get stock parts or nice repos. I feel like I ask for the impossible but I can't stand the idea of putting modern crap on a classic

Did mine like that because of 2 resons 1 to replace all the moldings got pricey. 2nd biggest reason is because this is something me and my dad have had for years, and now that we finally got it painted he would have no part in the two tone not even the cab top!

ChevyDude · 04-19-2005, 07:04 PM

I town in So Cal do you live in??? Oh and welcome to the board!!!

*dtlilly* · 04-19-2005, 09:14 PM

Welcome to the board. Did you ever get your pictures? The wood color in the moulding is sticker, and any of the board vendors will sell replacement fairly cheap.

**Palf70Step** · 04-19-2005, 09:18 PM

Welcome from the southern side of Mississippi.

**GSFMECH** · 04-20-2005, 12:07 AM

This is the highlander interior that was in my 72 when I bought it. I don't think this exact pattern is being repoped but I think there are few of the other color combos available. Highlander had the plaid seat, black carpet and dash pad. There are a lot of old post about this. I have factory buckets now so I did not search anymore for the correct upholstery.
Mike

oldblue72 · 04-20-2005, 11:50 PM

GSFMECH you have a beautiful truck on account that it looks alot like mine of course

Your higlander seat is in better condition than mine. I want a new one that is just like the old one! I'm a bit of a purist and a person of habit. I was reading about some businesses that do reapolstry with classic materials. I don't know if they match it with new or just have old fabrics. Did you have any problems with discoloration on the hood? What causes that? Anyhow, maybe you would know how rare my truck is. I've seen one other one in the two-tone yellow and it was rusted out pretty bad but it was in driving condition. I see lots of old trucks because I live in a farming community but none like mine. I see cheyennes, 20s, and newer 10s. Once I get some pictures on the board maybe people will be able to tell me more about its worth and detailed info. Thanks for all the replies.

Russell · 04-21-2005, 12:17 AM

Welcome to the board!

I'm looking forward to pics!

**clay68c10** · 04-21-2005, 08:57 PM

Welcome to the board. Tons of good info & folks here. Would love to see some pics. I got my first 68 when I was 16 (1988). Sounds like yours is a keeper.

Billy G · 04-21-2005, 10:10 PM

Welcome from SE Texas

RON WOODGEARD · 04-21-2005, 10:12 PM

Another WELCOME!!! From Northern Nevada....

04-15-2005, 05:41 PM	#1
oldblue72 Registered User Join Date: Apr 2005 Location: Southern California Posts: 19	I'm new and have questions about 72 c-10 I am new to the message board. I live in a tiny town in southern California. My great grandfather bought a truck when it was new in 1972 and it's been in my family ever since. I love the darn thing. It's a custom deluxe 10. It has the original paint (blue two-tone) and is in pretty good condition. It has the 350 engine and is a longbed. I'll try and get some pictures of it. I use it everyday around town. The transmission could be rebuilt but it doesn't give me much trouble. I learned some general stuff like changing oil, changing tranny fluid, sparks, points, and things like that. Just enough to keep it running. But I want to know more. How much does a tran rebuild cost? How much does the truck weigh? Where can I find a bench seat that looks like the original (blue plaid w/ some white detailed vinyl)? How much is it worth? I believe it has mostly original parts in it. There isn't rust to speak of. Some brick red primer shows in the bed (only in the bed and only a bit). The body is in excellent condition. The only paint problem is on the hood. It has some discoloration (cream color) I think it's from years of chemicals or gases coming from the under the hood. The engine was probably worked on by my uncle but not replaced. I'd love to hear any general information about the truck and feel free to ramble on. Every time a see a picture of a truck that looks like mine on the forum my heart starts beating faster. I get a real kick out of 'em. Remember, I am only 17 and l'm still learning so don't assume I know what every part is. Thanks for any info you have. Last edited by oldblue72; 04-15-2005 at 06:22 PM.

04-15-2005, 05:51 PM	#2
TRUCKGUY Registered User Join Date: Jan 2005 Location: Nortonville, Ky Posts: 407	welcome to the board from ky,....far as how much does it wiegh check your vin plate or you could go to a truck stop and use a set of there scales... __________________ Dan. 55 F100 panel truck project 64 350/th400/10bolt short fleet 66 F100 302/C6/9" short fleet 67 IH 4x2 304/t984speed D44 373 locker lwb box 67 IH 4x4 304/t98 4speed/d44/d60 4.10'slwb box 67 IH Travelall 4x4 304/t98 4speed/12bolt/10bolt 81 2wd short fleet current build! 83 350/700r4 short fleet 88 k5 12" lift 3/4 ton swap mud toy 96 Dodge 3500 CUMMINS/5speed/4x2 97 Pontiac Trans Am WS6/LT1 383/6speed/T-tops

04-15-2005, 07:40 PM	#6
MARIOS68PANEL Active Member Join Date: Mar 2005 Location: North Highlands. California Posts: 449	Welcome from a nor cal new guy __________________ 67 short step 71 Custom

04-15-2005, 08:11 PM	#7
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	my 68 long fleet w/ a V8 2WD and auto transweighs 3900-4000 depending on how much gas and what i have in it. welcome to the boards __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler

04-15-2005, 08:35 PM	#8
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Welcome to the 67-72 boards. __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

04-15-2005, 06:27 PM	#3
jesgord Registered User Join Date: Nov 2004 Location: Orient, NY Posts: 27	If the original seat is white w/blue plaid inserts, sounds like you have the highlander package in your truck....very cool interior package. Welcome to the board from another newbie

04-15-2005, 06:49 PM	#4
oldblue72 Registered User Join Date: Apr 2005 Location: Southern California Posts: 19	The seat is in medium condition. About what you would expect. minor tears around the edges. I refuse to put a cheap seat cover on it though. Does your truck have the highlander package? It is pretty sweet how the paint matches the seat.

04-15-2005, 06:57 PM	#5
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 6,042	Your truck probably weighs somewhere in the 3400-3600 lb. range.

04-15-2005, 08:43 PM	#9
jhwkns Registered Cruiser Join Date: May 2002 Location: Las Vegas NV Posts: 2,230	Welcome aboard! __________________ I intend to live forever. So far, so good.

04-15-2005, 09:07 PM	#10
oldblue72 Registered User Join Date: Apr 2005 Location: Southern California Posts: 19	Why is it that people peel off the metal that separates the tones and paint it all one color? I love the way the originals look. Is it just a matter of preference? Oh, and where is a place I can get stock parts or nice repos. I feel like I ask for the impossible but I can't stand the idea of putting modern crap on a classic

04-15-2005, 09:39 PM	#11
TRUCKGUY Registered User Join Date: Jan 2005 Location: Nortonville, Ky Posts: 407	stock parts? as in what fenders body parts?...they make all of them new they look the same also,.....and some trucks did not come with the 2 tone,and then some people want theirs without the side moldings.....like the way i am wanting to do mine it would look bad with them,my opinion,......but you build the truck the way you want it not the way some one else wants it......and the original,oldskool trucks look awsome,....but i am wanting to go a different way with mine,......if all of our year trucks were 2 tone there wouldnt be much to choose from........and as far as parts i would try here first on the parts board great place!.... __________________ Dan. 55 F100 panel truck project 64 350/th400/10bolt short fleet 66 F100 302/C6/9" short fleet 67 IH 4x2 304/t984speed D44 373 locker lwb box 67 IH 4x4 304/t98 4speed/d44/d60 4.10'slwb box 67 IH Travelall 4x4 304/t98 4speed/12bolt/10bolt 81 2wd short fleet current build! 83 350/700r4 short fleet 88 k5 12" lift 3/4 ton swap mud toy 96 Dodge 3500 CUMMINS/5speed/4x2 97 Pontiac Trans Am WS6/LT1 383/6speed/T-tops

04-16-2005, 03:31 AM	#13
Brainchild Still drivin' a Rat Rod Join Date: Sep 2004 Location: Monett Missouri Posts: 4,925	There are some vendors that hang out here,and also used stuff on the parts boards.You'll be able to find everything you need to get the truck back into shape. Welcome to the boards from MO. Anyone with pics of a Highlander Interior,I'm curious myself about that one. __________________ Rusty Member #13872 Instead of saying.....you are a discomfort in the back of my front.....one should be able to say...... you are a pain in the a$# 71 GMC LWB 49 Chevy 85 Chevy G20 Check out my website

04-16-2005, 08:19 AM	#14
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Welcome to the board. Like said, you will find some great vendors on this board. This is a board that doesn't mind any type of question, simple or hard, they all will get answered. Good to see another young person show an interest in these classics - they are pretty special to all of us! Uh, any pics of your truck? __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

04-19-2005, 06:33 PM	#15
oldblue72 Registered User Join Date: Apr 2005 Location: Southern California Posts: 19	I'm hoping to get some pictures on the web by this weekend. I just noticed something on my truck that is very simple but I notice it. The fake wood strip that sits just below the lower molding (about an 1.5'' wide) is discolored and cracked. I want new strips if I could find some. Could I get that at a general parts store? Is it something I could put on myself? __________________ -Sarah "I will give you my finest hour. The one I spent watching you shower" -Blondie

04-19-2005, 07:04 PM	#17
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	I town in So Cal do you live in??? Oh and welcome to the board!!! __________________ Alex 1971 Lil' Red 350 SBC 700R4



Register or Log In To remove these advertisements.

04-19-2005, 09:14 PM	#18
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Welcome to the board. Did you ever get your pictures? The wood color in the moulding is sticker, and any of the board vendors will sell replacement fairly cheap.

04-19-2005, 09:18 PM	#19
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,269	Welcome from the southern side of Mississippi. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

04-20-2005, 12:07 AM	#20
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	This is the highlander interior that was in my 72 when I bought it. I don't think this exact pattern is being repoped but I think there are few of the other color combos available. Highlander had the plaid seat, black carpet and dash pad. There are a lot of old post about this. I have factory buckets now so I did not search anymore for the correct upholstery. Mike Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

04-20-2005, 11:50 PM	#21
oldblue72 Registered User Join Date: Apr 2005 Location: Southern California Posts: 19	GSFMECH you have a beautiful truck on account that it looks alot like mine of course Your higlander seat is in better condition than mine. I want a new one that is just like the old one! I'm a bit of a purist and a person of habit. I was reading about some businesses that do reapolstry with classic materials. I don't know if they match it with new or just have old fabrics. Did you have any problems with discoloration on the hood? What causes that? Anyhow, maybe you would know how rare my truck is. I've seen one other one in the two-tone yellow and it was rusted out pretty bad but it was in driving condition. I see lots of old trucks because I live in a farming community but none like mine. I see cheyennes, 20s, and newer 10s. Once I get some pictures on the board maybe people will be able to tell me more about its worth and detailed info. Thanks for all the replies. __________________ -Sarah "I will give you my finest hour. The one I spent watching you shower" -Blondie

04-21-2005, 12:17 AM	#22
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Welcome to the board! I'm looking forward to pics! __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

04-21-2005, 08:57 PM	#23
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,996	Welcome to the board. Tons of good info & folks here. Would love to see some pics. I got my first 68 when I was 16 (1988). Sounds like yours is a keeper. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

04-21-2005, 10:10 PM	#24
Billy G Registered User Join Date: May 2003 Location: Dayton, Tx (in Old River) Posts: 286	Welcome from SE Texas __________________ My FAMOUS LAST WORDS...."Ima Gonna!!" - 1970 GMC 1500 swb/step 250 I-6 3 spd - "The GEM" - 1976 Chev Scotsdale swb/step 350/350 - "The JEWEL" - 1982 Chev C-10 swb/step 250 I-6 3 spd - - 2001 Chev Silverado LT -

04-21-2005, 10:12 PM	#25
RON WOODGEARD Resident Young Old Dude ! Join Date: Jul 2001 Location: Nevada Posts: 1,948	Another WELCOME!!! From Northern Nevada....

Register or Log In To remove these advertisements.