Anyone need any frame parts? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Burnsman · 04-18-2005, 09:35 PM

I'm taking the rest of this truck to the scrap yard this weekend. I'm taking some more parts off of it (overloads, trailing arms, power steering, ac dash, etc.), but is there any other frame parts anyone would want before it goes bye bye? It's a 70 2wd longbed truck.

doc70sub · 04-18-2005, 09:57 PM

How are the rear cab mounts?
Thanks!
Doc

Burnsman · 04-18-2005, 09:59 PM

Doc, I'll try to check them out. It may be best for me to cut the cab loose and make sure the holes aren't rotted out. I've seen some pretty nice ones that were rotted around the bushings. I'll get to it later this week. Brian

Gyva · 04-18-2005, 10:00 PM

sandblast it and paint it, at least make some mula off of it???? I could'nt scrap anything lol..... but I guess that takes time and space...

doc70sub · 04-18-2005, 10:01 PM

Thanks!!
Doc

lamar · 04-18-2005, 10:08 PM

I need the last foot or so of the frame in the rear. Mine is a swb, would it be the same? Both sides of mine is a little rusty. If that part is good and you want to cut it, how much plus shipping?

67ChevyC10Stepside · 04-19-2005, 01:22 AM

are the rear bottom shock mounts good?

JalopyToGo · 04-19-2005, 06:39 AM

Is that power steering pump any good and is it for sale? What was it on? How much to ship to 75002.
Thanks

Burnsman · 04-19-2005, 07:38 AM

I won't be able to get out into the garage for a few nights, but I'll get everything checked out. The pump was on a 350 that was in it, but it must have been a newer one (I'm assuming with a long water pump) becuase of the newer pump and the alternator wires were moved to the other side. Let me know if you're still interested and I can get a price. Brian

JalopyToGo · 04-19-2005, 07:56 AM

Sounds like what I am looking. I converted from a six to a newer 350 with long water pump and need a pump. Let me know what you find.
Thanks
Jeff

Burnsman · 04-19-2005, 08:12 AM

Jalopy, if you're just looking for the pump, it would be $25 to your door. Brian

JalopyToGo · 04-19-2005, 12:27 PM

Is that including the bracket? If so PM with your address and I will send the money (is a cashiers check OK)?
Thanks

Burnsman · 04-19-2005, 09:21 PM

Doc, cab mounts are shot. I may getting rid of another one with some nice ones though, so I'll keep you in mind. Ernie, the lower shock mounts are good. $15 to your door. Brian

67ChevyC10Stepside · 04-19-2005, 09:32 PM

let me make sure i need em....i'll get back to ya..

doc70sub · 04-19-2005, 09:36 PM

Thanks for checking bud!!
Doc

68C15 · 04-20-2005, 10:08 AM

how much to 57104 for 12" of frame length between the cab mounts? stretching my cab.
thanks, Todd

Burnsman · 04-20-2005, 10:27 AM

Let me check it out tonight and I'll get back to you first thing tomorrow morning. Brian

boraxman · 04-20-2005, 10:29 AM

I would like the front pass. tip back to the first mount.

Burnsman · 04-20-2005, 12:04 PM

Boraxman, $15 to your door. Brian

Burnsman · 04-20-2005, 08:44 PM

Last part of frame is bad. Mainly because it's got a pile of stuff welded to it. The section between the mounts has some pits. If this is ok, I can cut them out this weekend. Let me know. Brian

68C15 · 04-20-2005, 09:00 PM

any pics of the area in question? I know I am asking a lot, but these pieces would make life easier for me.

Burnsman · 04-20-2005, 09:11 PM

Sure. I'll be out of town tomorrow night, but I'll get some Friday. Brian

Burnsman · 04-24-2005, 07:45 AM

68c15, I've been busy this weekend, so I'll try to get some pics tonight. Boraxman, your parts are boxed and will be shipped tomorrow via ups. Brian

GloryHound · 04-24-2005, 09:27 PM

68C15

I have a 157" wheel base 72 1 ton truck I'm stripping to the ground. The frame is good, but I'm building a short bed truck. This would let you do aproximately a 30" stretch without cutting the frame. It would be one hell of a haul for you but it your interested I should have the thing stripped sometime in late june early july. Let me know!

Burnsman · 04-24-2005, 09:46 PM

68c15, here is a pic of the section. Other side is similar. They will most likely still have a few pits after blasting. $25 for both pieces to your door. Just let me know. I have to get this thing out of my garage this week. Brian

04-18-2005, 09:35 PM	#1
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Anyone need any frame parts? I'm taking the rest of this truck to the scrap yard this weekend. I'm taking some more parts off of it (overloads, trailing arms, power steering, ac dash, etc.), but is there any other frame parts anyone would want before it goes bye bye? It's a 70 2wd longbed truck. Attached Images __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

04-18-2005, 09:57 PM	#2
doc70sub Registered User Join Date: Dec 2000 Location: Thomasville, NC Posts: 669	How are the rear cab mounts? Thanks! Doc __________________ 1970 Sub C-10 - 350/TH-350/3.73 12-bolt Came home from the hospital in it & mine ever since. 1966 Catalina Ventura 2-door fastback 389/TH400

04-18-2005, 09:59 PM	#3
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	cab mounts Doc, I'll try to check them out. It may be best for me to cut the cab loose and make sure the holes aren't rotted out. I've seen some pretty nice ones that were rotted around the bushings. I'll get to it later this week. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

04-18-2005, 10:01 PM	#5
doc70sub Registered User Join Date: Dec 2000 Location: Thomasville, NC Posts: 669	Thanks!! Doc __________________ 1970 Sub C-10 - 350/TH-350/3.73 12-bolt Came home from the hospital in it & mine ever since. 1966 Catalina Ventura 2-door fastback 389/TH400

04-18-2005, 10:08 PM	#6
lamar Registered User Join Date: Apr 2004 Location: Covington,Ga Posts: 453	I need the last foot or so of the frame in the rear. Mine is a swb, would it be the same? Both sides of mine is a little rusty. If that part is good and you want to cut it, how much plus shipping? __________________ 72 C-10

04-18-2005, 10:00 PM	#4
Gyva Registered User Join Date: Jan 2005 Location: Mountain Home Idaho Posts: 544	sandblast it and paint it, at least make some mula off of it???? I could'nt scrap anything lol..... but I guess that takes time and space...

04-19-2005, 01:22 AM	#7
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	are the rear bottom shock mounts good? __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

04-19-2005, 06:39 AM	#8
JalopyToGo Registered User Join Date: Dec 2003 Location: Parker, Tx Posts: 61	Is that power steering pump any good and is it for sale? What was it on? How much to ship to 75002. Thanks __________________ 69 LWB 70 SWB 01 Superduty Diesel 4X4 4door 06 Caddy CTS Last edited by JalopyToGo; 04-19-2005 at 06:57 AM.

04-19-2005, 07:38 AM	#9
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	frame parts I won't be able to get out into the garage for a few nights, but I'll get everything checked out. The pump was on a 350 that was in it, but it must have been a newer one (I'm assuming with a long water pump) becuase of the newer pump and the alternator wires were moved to the other side. Let me know if you're still interested and I can get a price. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

04-19-2005, 07:56 AM	#10
JalopyToGo Registered User Join Date: Dec 2003 Location: Parker, Tx Posts: 61	Sounds like what I am looking. I converted from a six to a newer 350 with long water pump and need a pump. Let me know what you find. Thanks Jeff __________________ 69 LWB 70 SWB 01 Superduty Diesel 4X4 4door 06 Caddy CTS

04-19-2005, 08:12 AM	#11
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	power steering Jalopy, if you're just looking for the pump, it would be $25 to your door. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

04-19-2005, 12:27 PM	#12
JalopyToGo Registered User Join Date: Dec 2003 Location: Parker, Tx Posts: 61	Is that including the bracket? If so PM with your address and I will send the money (is a cashiers check OK)? Thanks __________________ 69 LWB 70 SWB 01 Superduty Diesel 4X4 4door 06 Caddy CTS

04-19-2005, 09:21 PM	#13
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	parts Doc, cab mounts are shot. I may getting rid of another one with some nice ones though, so I'll keep you in mind. Ernie, the lower shock mounts are good. $15 to your door. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

04-19-2005, 09:32 PM	#14
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	let me make sure i need em....i'll get back to ya.. __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

04-19-2005, 09:36 PM	#15
doc70sub Registered User Join Date: Dec 2000 Location: Thomasville, NC Posts: 669	Thanks for checking bud!! Doc __________________ 1970 Sub C-10 - 350/TH-350/3.73 12-bolt Came home from the hospital in it & mine ever since. 1966 Catalina Ventura 2-door fastback 389/TH400



Register or Log In To remove these advertisements.

04-20-2005, 10:08 AM	#16
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	how much to 57104 for 12" of frame length between the cab mounts? stretching my cab. thanks, Todd __________________ Man rule #77...if you own a 67 stepside with a caddy 472 you will never be in danger of loosing you man card

04-20-2005, 10:27 AM	#17
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	frame sections Let me check it out tonight and I'll get back to you first thing tomorrow morning. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

04-20-2005, 10:29 AM	#18
boraxman Keepin an eye out Join Date: Feb 2003 Location: So.Cal Posts: 3,920	I would like the front pass. tip back to the first mount. __________________ 1970 Chevy C10 SWB 5.3 1996 Toyota Tacoma SR5 4x4 2007 Vespa GTS 250 Scooter ZIP 91351

04-20-2005, 12:04 PM	#19
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	front frame horn Boraxman, $15 to your door. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

04-20-2005, 08:44 PM	#20
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	parts Last part of frame is bad. Mainly because it's got a pile of stuff welded to it. The section between the mounts has some pits. If this is ok, I can cut them out this weekend. Let me know. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

04-20-2005, 09:00 PM	#21
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	any pics of the area in question? I know I am asking a lot, but these pieces would make life easier for me. __________________ Man rule #77...if you own a 67 stepside with a caddy 472 you will never be in danger of loosing you man card

04-20-2005, 09:11 PM	#22
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	frame pics Sure. I'll be out of town tomorrow night, but I'll get some Friday. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

04-24-2005, 07:45 AM	#23
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	parts 68c15, I've been busy this weekend, so I'll try to get some pics tonight. Boraxman, your parts are boxed and will be shipped tomorrow via ups. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

04-24-2005, 09:27 PM	#24
GloryHound Working on a Nova. Join Date: Nov 2002 Location: ## Posts: 506	68C15 I have a 157" wheel base 72 1 ton truck I'm stripping to the ground. The frame is good, but I'm building a short bed truck. This would let you do aproximately a 30" stretch without cutting the frame. It would be one hell of a haul for you but it your interested I should have the thing stripped sometime in late june early july. Let me know! Last edited by GloryHound; 04-24-2005 at 09:29 PM.

04-24-2005, 09:46 PM	#25
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	frame section 68c15, here is a pic of the section. Other side is similar. They will most likely still have a few pits after blasting. $25 for both pieces to your door. Just let me know. I have to get this thing out of my garage this week. Brian Attached Images __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

Register or Log In To remove these advertisements.