Good stuff cheap! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Purs · 04-23-2005, 07:22 PM

All parts used unless otherwise stated and all prices include shipping costs.

pair (only 1 pictured) of stock BB valve covers $30

New Chrome distick $12

Holley Vaccum secondary spring tuning set $8

Oil fill tube for smallblock $15 SOLD

Autometer Sport comp gauges $5 each or $12 for all 3. Water temp needs a new sender or capillary tube. SOLD

Manual steering box (comes with pitman arm if you want it) off my '68. worked perfect when it was pulled a few weeks ago$35
SOLD
Manual drum master cylinder/Proportioning valve off my '68. worked perfect when pulled a few weeks ago. $25

Brand new (bought a year or so ago) never installed 55 Watt Off Road lights. These were over $100 new, I'll take $60.

Stock spare tire carrier off my '68. $35 SOLD

2nd Picture:

Pair of '72 Disc Brake Spindles $60 (I also have the rotors, calipers, etc but you'll have to pay more for shipping).

Pretty new Stock rear springs (maybe Heavy Duty, not sure) $35

Pretty new Stock front springs with 1 cut coil. $35

3rd Picture:

Stock 12 bolt with 3.73's or 4.10's. No noises, brakes fairly new. $125 PLUS shipping.

Not pictured:

Power steering pump and bracket for smallblock $50

New MSD HEI Distributor Cap female style $12

Good radiator $30 plus shipping

I have a whole '72 parts truck with the 350 that will not turn over. 12 bolt and front spindles are already gone plus the hood and one fender. Its pretty rusty. I will make a package deal for the truck and all related parts if you want to come get it.

Pending

I will accept Paypal if you are willing to pay the small fee they charge.

All responses here please to avoid any misunderstandings.

Thanks.

70c10 · 04-23-2005, 07:46 PM

What gauges are the other ones?. Are they mechanical and what sizes and do they work?. Thanks

Purs · 04-23-2005, 07:54 PM

2 5/8. mechanical oil pressure, electric volt, and mechanical water temp. the water temp needs a sender/tubing. they all worked including the water temp until the capillary tube got kinked. I also have an electric fuel level, and electric water temp not pictured.

70c10 · 04-23-2005, 08:39 PM

Purs- I'll take the gauges. PM me with details. How much for the fuel level gauge?

Purs · 04-23-2005, 09:01 PM

same for the others $5. If you want all 5 then $22 delivered.

70c10 · 04-23-2005, 09:10 PM

ok, I'll take them all for $22.

Purs · 04-23-2005, 09:14 PM

PM sent. thanks Jim.

70c10 · 04-23-2005, 09:21 PM

Paypal was just sent. Thanks Brit!

camaro__thunder · 04-23-2005, 09:27 PM

sent pm about rearend but just saw it was a 6 lugger.

jhwkns · 04-23-2005, 09:49 PM

PM sent.. thanks

70c10 · 04-24-2005, 02:17 PM

Brit, I'm interested in the radiator if it's for a V8, automatic trans. Is it heavy duty???. What would shipping be to 21236?. Thanks

JalopyToGo · 04-25-2005, 06:52 AM

Put me next in line for the radiator, if its for auto and 3or4 core. Where in TX are you?
Thanks

Purs · 04-25-2005, 12:25 PM

Abilene. I'll try to check shipping this afternoon.

70c10 · 04-26-2005, 07:21 AM

bump

Purs · 04-26-2005, 09:32 AM

Sorry Jim, I've got one daughter recovering from having her tonsils taken out and my middle daughter caught a stomach bug yesterday....

I haven't checked shipping yet but will try today. I've got several good radiators. 1 or 2 for our trucks, 1 chevelle (same dimensions as our trucks), and 1 4 core for a 1st Gen Camaro. They all worked fine when pulled I just got on an aluminum radiator kick...

70c10 · 04-26-2005, 10:33 AM

No problem Brit, I understand. I hope your little girls are OK. Just PM when you have time for a shipping quote. My dad needs one for his 70' with a 350 motor and automatic tranny. Preferably a heavy duty one. Thanks

Brewski* · 05-04-2005, 11:14 AM

I will take the Oil fill tube for smallblock $15. Thanks
Brew.

ndamerau · 05-04-2005, 12:43 PM

I will buy the power steering pump and bracket. I assume the pump works, doesn't leak, the pulley is good and the bracket is really two pieces, the cast iron part and the formed steel plate that attach to the front of the engine and the driver side engine mount bolt?

Thanks.

ndamerau

oj70chevy · 05-04-2005, 01:18 PM

PM sent.

fade94 · 05-04-2005, 02:24 PM

Any chance you would sell the motor?

Purs · 05-04-2005, 07:08 PM

Brewski, oj70chevy, ndamerau, you all have PM's.

fade94, I will just sell the complete engine carb to pan WITH accesories for $200

oj70chevy · 05-06-2005, 08:11 AM

paypal sent

ttt 4 u

Purs · 05-06-2005, 09:52 AM

thanks oj, I'll send it out today or tomorrow. I have a "Pending" local deal for the whole '72 parts truck.

dallas71 · 05-06-2005, 09:56 AM

Purs, where are you located? I might be interested in the Radiator....what condition is it in and any pics???

90\87Formula · 05-06-2005, 09:49 PM

I believe he's just a few minutes south of Abilene.

04-23-2005, 07:22 PM	#1
Purs Got Big Block? Join Date: Apr 2000 Location: West Texas Posts: 1,510	Good stuff cheap! All parts used unless otherwise stated and all prices include shipping costs. pair (only 1 pictured) of stock BB valve covers $30 New Chrome distick $12 Holley Vaccum secondary spring tuning set $8 Oil fill tube for smallblock $15 SOLD Autometer Sport comp gauges $5 each or $12 for all 3. Water temp needs a new sender or capillary tube. SOLD Manual steering box (comes with pitman arm if you want it) off my '68. worked perfect when it was pulled a few weeks ago$35 SOLD Manual drum master cylinder/Proportioning valve off my '68. worked perfect when pulled a few weeks ago. $25 Brand new (bought a year or so ago) never installed 55 Watt Off Road lights. These were over $100 new, I'll take $60. Stock spare tire carrier off my '68. $35 SOLD 2nd Picture: Pair of '72 Disc Brake Spindles $60 (I also have the rotors, calipers, etc but you'll have to pay more for shipping). Pretty new Stock rear springs (maybe Heavy Duty, not sure) $35 Pretty new Stock front springs with 1 cut coil. $35 3rd Picture: Stock 12 bolt with 3.73's or 4.10's. No noises, brakes fairly new. $125 PLUS shipping. Not pictured: Power steering pump and bracket for smallblock $50 New MSD HEI Distributor Cap female style $12 Good radiator $30 plus shipping I have a whole '72 parts truck with the 350 that will not turn over. 12 bolt and front spindles are already gone plus the hood and one fender. Its pretty rusty. I will make a package deal for the truck and all related parts if you want to come get it. Pending I will accept Paypal if you are willing to pay the small fee they charge. All responses here please to avoid any misunderstandings. Thanks. Attached Images __________________ "Experience is what you get when you didn't get what you wanted." Last edited by Purs; 05-06-2005 at 09:53 AM.

04-23-2005, 07:46 PM	#2
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	What gauges are the other ones?. Are they mechanical and what sizes and do they work?. Thanks __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

04-23-2005, 07:54 PM	#3
Purs Got Big Block? Join Date: Apr 2000 Location: West Texas Posts: 1,510	2 5/8. mechanical oil pressure, electric volt, and mechanical water temp. the water temp needs a sender/tubing. they all worked including the water temp until the capillary tube got kinked. I also have an electric fuel level, and electric water temp not pictured. __________________ "Experience is what you get when you didn't get what you wanted." Last edited by Purs; 04-23-2005 at 07:55 PM.

04-23-2005, 08:39 PM	#4
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Purs- I'll take the gauges. PM me with details. How much for the fuel level gauge? __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

04-23-2005, 09:01 PM	#5
Purs Got Big Block? Join Date: Apr 2000 Location: West Texas Posts: 1,510	same for the others $5. If you want all 5 then $22 delivered. __________________ "Experience is what you get when you didn't get what you wanted."

04-23-2005, 09:10 PM	#6
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	ok, I'll take them all for $22. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

04-23-2005, 09:14 PM	#7
Purs Got Big Block? Join Date: Apr 2000 Location: West Texas Posts: 1,510	PM sent. thanks Jim. __________________ "Experience is what you get when you didn't get what you wanted."

04-23-2005, 09:21 PM	#8
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Paypal was just sent. Thanks Brit! __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

04-23-2005, 09:27 PM	#9
camaro__thunder Epoxy Primer Friendly Join Date: Feb 2004 Location: South of Houston TEXXXAS Posts: 680	sent pm about rearend but just saw it was a 6 lugger. __________________ My Project 69 SWB SHAVED BAGGED DOORED

04-23-2005, 09:49 PM	#10
jhwkns Registered Cruiser Join Date: May 2002 Location: Las Vegas NV Posts: 2,230	PM sent.. thanks __________________ I intend to live forever. So far, so good.

04-24-2005, 02:17 PM	#11
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Brit, I'm interested in the radiator if it's for a V8, automatic trans. Is it heavy duty???. What would shipping be to 21236?. Thanks __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

04-25-2005, 06:52 AM	#12
JalopyToGo Registered User Join Date: Dec 2003 Location: Parker, Tx Posts: 61	Put me next in line for the radiator, if its for auto and 3or4 core. Where in TX are you? Thanks __________________ 69 LWB 70 SWB 01 Superduty Diesel 4X4 4door 06 Caddy CTS

04-25-2005, 12:25 PM	#13
Purs Got Big Block? Join Date: Apr 2000 Location: West Texas Posts: 1,510	Abilene. I'll try to check shipping this afternoon. __________________ "Experience is what you get when you didn't get what you wanted."

04-26-2005, 07:21 AM	#14
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	bump __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

04-26-2005, 09:32 AM	#15
Purs Got Big Block? Join Date: Apr 2000 Location: West Texas Posts: 1,510	Sorry Jim, I've got one daughter recovering from having her tonsils taken out and my middle daughter caught a stomach bug yesterday.... I haven't checked shipping yet but will try today. I've got several good radiators. 1 or 2 for our trucks, 1 chevelle (same dimensions as our trucks), and 1 4 core for a 1st Gen Camaro. They all worked fine when pulled I just got on an aluminum radiator kick... __________________ "Experience is what you get when you didn't get what you wanted." Last edited by Purs; 04-26-2005 at 10:36 AM.



Register or Log In To remove these advertisements.

04-26-2005, 10:33 AM	#16
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	No problem Brit, I understand. I hope your little girls are OK. Just PM when you have time for a shipping quote. My dad needs one for his 70' with a 350 motor and automatic tranny. Preferably a heavy duty one. Thanks __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

05-04-2005, 11:14 AM	#17
Brewski* Registered User Join Date: Aug 2001 Location: Rocky Mount, MO Posts: 1,293	I will take the Oil fill tube for smallblock $15. Thanks Brew.

05-04-2005, 12:43 PM	#18
ndamerau Active Member Join Date: Feb 2004 Location: Fort Worth, TX Posts: 122	I will buy the power steering pump and bracket. I assume the pump works, doesn't leak, the pulley is good and the bracket is really two pieces, the cast iron part and the formed steel plate that attach to the front of the engine and the driver side engine mount bolt? Thanks. ndamerau

05-04-2005, 01:18 PM	#19
oj70chevy 250 V-6 Club Join Date: Feb 2005 Location: San antonio, TX. Posts: 898	Stock spare tire carrier off my '68 PM sent. __________________ 1970 Chevy C/10 6 Cyl. 43k original miles all factory .http://67-72chevytrucks.com/vboard/s...d.php?t=197523 Never ask a stupid question unless you want a stupid answer . Last edited by oj70chevy; 05-04-2005 at 02:11 PM.

05-04-2005, 02:24 PM	#20
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	Any chance you would sell the motor? __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

05-04-2005, 07:08 PM	#21
Purs Got Big Block? Join Date: Apr 2000 Location: West Texas Posts: 1,510	Brewski, oj70chevy, ndamerau, you all have PM's. fade94, I will just sell the complete engine carb to pan WITH accesories for $200 __________________ "Experience is what you get when you didn't get what you wanted."

05-06-2005, 08:11 AM	#22
oj70chevy 250 V-6 Club Join Date: Feb 2005 Location: San antonio, TX. Posts: 898	Stock spare tire carrier off my '68 paypal sent ttt 4 u __________________ 1970 Chevy C/10 6 Cyl. 43k original miles all factory .http://67-72chevytrucks.com/vboard/s...d.php?t=197523 Never ask a stupid question unless you want a stupid answer . Last edited by oj70chevy; 05-06-2005 at 08:37 AM.

05-06-2005, 09:52 AM	#23
Purs Got Big Block? Join Date: Apr 2000 Location: West Texas Posts: 1,510	thanks oj, I'll send it out today or tomorrow. I have a "Pending" local deal for the whole '72 parts truck. __________________ "Experience is what you get when you didn't get what you wanted." Last edited by Purs; 05-06-2005 at 09:54 AM.

05-06-2005, 09:56 AM	#24
dallas71 Registered User Join Date: Mar 2004 Location: Corinth,TX Posts: 444	Purs, where are you located? I might be interested in the Radiator....what condition is it in and any pics??? __________________ My 1966 LWB Truck My 1966 SWB Truck

05-06-2005, 09:49 PM	#25
90\87Formula Registered User $90\87Formula's Avatar$ Join Date: Oct 2000 Location: Abilene Texas Posts: 1,756	I believe he's just a few minutes south of Abilene. __________________ Robert Member 1532
$90\87Formula is offline$

Register or Log In To remove these advertisements.