cheapest i can get a 700r4?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ocbaud · 04-25-2005, 02:50 PM

whats the cheapest place i can get a good 700r4 that will hold 400+hp???

i want the bowtie overdrives one, but its a lot of money

**old Rusty C10** · 04-25-2005, 02:53 PM

the problem with the cheaper units is they use aftermarket and japenese or korean parts to rebuild them.. ive had transmissions rebuilt by the cheaper rebuilders and theyve died alot faster than the ones rebuilt with a decent kit id say try finding a rebuilder and then find out what he can do for ya here i swear by Anderson Transmission but im clear across the country from ya

low 84 · 04-25-2005, 02:59 PM

if you take one to a shop and have it rebuilt/beefed up and its done right its gonna cost you 700-800 i would guess

84stepper2 · 04-25-2005, 06:26 PM

Im needing to do the same thing this summer so I can freaking drive my truck! Im hoping it will only be around a $1000

gchemist · 04-25-2005, 07:49 PM

$1100 is what I paid for mine. I can give you the guys phone number if you want to call.

ocbaud · 04-25-2005, 08:01 PM

Quote:

Originally Posted by gchemist

$1100 is what I paid for mine. I can give you the guys phone number if you want to call.

the one from bowtie overdrives is just a tad bit less than that.

oh, i'm also gonna need a new stall too

SanitysBane · 04-25-2005, 10:04 PM

Why not rebuild it yourself? I did and its holding up to my 454 with 500 hp no problem at all.

79BIG10 · 04-25-2005, 11:41 PM

Eric I've got a guy here in town that will build you one cheap with quality parts. I'm running the TH350 I got from him from a few years ago and cost me less than $400 installed. He will gurantee his work and also makes his own converters to your stall. If you want let me know and I'll PM you his number.

bringit · 04-26-2005, 05:22 AM

OCBAUD-Im from edmond Ok and had mine rebuilt in the city at Trans Unlimited. They did a real good job and it has performed great, I paid 750$ but mines just stock rebuild so it will probly be a little more. All the other places wanted 1000$ or up so I felt it was a good deal.

8t5Silverado · 04-26-2005, 02:15 PM

I was quoted $925 for a rebuild with stout components (some Corvette stuff).

04-25-2005, 02:50 PM	#1
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	cheapest i can get a 700r4?? whats the cheapest place i can get a good 700r4 that will hold 400+hp??? i want the bowtie overdrives one, but its a lot of money

04-25-2005, 02:53 PM	#2
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	the problem with the cheaper units is they use aftermarket and japenese or korean parts to rebuild them.. ive had transmissions rebuilt by the cheaper rebuilders and theyve died alot faster than the ones rebuilt with a decent kit id say try finding a rebuilder and then find out what he can do for ya here i swear by Anderson Transmission but im clear across the country from ya __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

04-25-2005, 02:59 PM	#3
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	if you take one to a shop and have it rebuilt/beefed up and its done right its gonna cost you 700-800 i would guess __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's Last edited by low 84; 04-25-2005 at 03:00 PM.

04-25-2005, 06:26 PM	#4
84stepper2 Registered User Join Date: Nov 2004 Location: Stillwater Oklahoma Posts: 52	Im needing to do the same thing this summer so I can freaking drive my truck! Im hoping it will only be around a $1000 __________________ 84 stepside with all the goodies

04-25-2005, 10:04 PM	#7
SanitysBane Registered User Join Date: May 2004 Location: Lubbock, Texas Posts: 2,121	Why not rebuild it yourself? I did and its holding up to my 454 with 500 hp no problem at all. __________________ '96 Nissan Pathfinder '02 Firebird Trans Am. '88 K5 Blazer

04-25-2005, 07:49 PM	#5
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	$1100 is what I paid for mine. I can give you the guys phone number if you want to call.

04-25-2005, 11:41 PM	#8
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	Eric I've got a guy here in town that will build you one cheap with quality parts. I'm running the TH350 I got from him from a few years ago and cost me less than $400 installed. He will gurantee his work and also makes his own converters to your stall. If you want let me know and I'll PM you his number. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

04-26-2005, 05:22 AM	#9
bringit Registered User Join Date: Apr 2004 Location: Edmond, Oklahoma Posts: 105	OCBAUD-Im from edmond Ok and had mine rebuilt in the city at Trans Unlimited. They did a real good job and it has performed great, I paid 750$ but mines just stock rebuild so it will probly be a little more. All the other places wanted 1000$ or up so I felt it was a good deal. __________________ 85 chevy K10 350 crate, headman headers, street avenger carb, accel distrib , rebuilt 700r4, on 33" Super Swamper TSL's, 4 inch Pro Comp lift, shocks, and steel braided brake lines.

04-26-2005, 02:15 PM	#10
8t5Silverado Mudslides 'r my specialty Join Date: Dec 2003 Location: STL Posts: 1,106	I was quoted $925 for a rebuild with stout components (some Corvette stuff). __________________ Always on the lookout for old cars and parts...(20s, 30s, 40s, 50s, 60s, etc.) http://www.cardomain.com/memberpage/500339



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.