1972 C30 rolling chassis - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gshibler · 06-24-2005, 06:11 PM

Location Herndon PA (1 hour north of Harrisburg PA)

The VIN was CCE332B139349, however there is no title.

I have a 72 One ton dually frame with rear end and all front suspension if anyone is interested in it or parts let me know. The frame has some rust spots, I will try to post pictures. Make offer

The 4 speed tranny, power steering, brake booster is also available.

The truck is being scrapped. If there are other parts needed let me know. All the body parts are rusted out though.

Phone number is 717 451 0496 I have email but am not very good about checking it (gshibler@tfp.org).

chevy_fatman · 06-24-2005, 09:40 PM

That sounds like a nice chassis to upgrade a 3/4 ton truck to 1 ton, if I only had the space

BTW I'm about 1hr. South of Harrisburg, I'm currently selling my 3/4 ton but if it don't sell, I be contacting you

bagged91 · 06-24-2005, 10:28 PM

How bad is the cab itself? I need a junker donor cab that I can have some fun cutting up. I need the roof, backwall and the floor to be solid(fromt he backwall to the middle of the floor, right behind the trannyhump... Got any pics you can show of it? I will be headed out that way in a week or two so I could pick up... Also, could use the windowframes from the doors.

L8R - Joe

da-burb · 06-25-2005, 01:38 AM

Before you scrap it I would pull the rear hub and drum assemblies. If they are good you will be able to sell them. My 71 C30 was just stranded in Indiana because I couldn't find a drum nearby.

Front end would be good if someone nearby was changing out to disk brakes on a 70 or older. I haven't looked at replacement rotors cost so I don't know if they are worth pulling.

LUV2XCLR8 · 06-25-2005, 07:58 AM

and

2 the board from west 10-uh-c

gshibler · 06-27-2005, 11:00 AM

Sorry I couldnt get to this before the weekend. The pictures of the frame attempt to show the rust. The one real bad spot is where the leaf spring shackle bolts up. There is about a two inch hole rusted right in the middle. unfortunately it is in shadow. I dont know if I should just cut the thing up or if it is still worth something to somebody

gshibler · 06-27-2005, 11:05 AM

The truck had a dump bed, so the tranny has the aux PTO I dont know if this was factory or not. That is what is welded onto the back of the frame. We had to cut it to get the dump frame off

stueber68 · 06-27-2005, 11:08 AM

Where are you? I might be interested in the chasis.

gshibler · 06-27-2005, 11:10 AM

If anyone needs more info or specific pics just email or call me, and Ill try to get them together. If no one wants the frame, by next week ill probably cut it up, and take it in for scrap.

gshibler · 06-27-2005, 11:12 AM

Quote:

Originally Posted by stueber68

Where are you? I might be interested in the chasis.

Pennsylvania

70-gmc · 11-05-2011, 10:02 PM

Quote:

Originally Posted by gshibler

The truck had a dump bed, so the tranny has the aux PTO I dont know if this was factory or not. That is what is welded onto the back of the frame. We had to cut it to get the dump frame off

factory but very rare...

Shaun1162 · 11-05-2011, 10:10 PM

Definately don't scrap the Eaton H072 rearend... You can get a couple bucks for that, Jeep guys like them too

**WIDESIDE72** · 11-06-2011, 01:40 AM

This thread WAS dead...

**fine69** · 11-06-2011, 10:14 AM

And it shall remain.

06-24-2005, 06:11 PM	#1
gshibler Registered User Join Date: Apr 2004 Location: Herndon PA Posts: 26	1972 C30 rolling chassis Location Herndon PA (1 hour north of Harrisburg PA) The VIN was CCE332B139349, however there is no title. I have a 72 One ton dually frame with rear end and all front suspension if anyone is interested in it or parts let me know. The frame has some rust spots, I will try to post pictures. Make offer The 4 speed tranny, power steering, brake booster is also available. The truck is being scrapped. If there are other parts needed let me know. All the body parts are rusted out though. Phone number is 717 451 0496 I have email but am not very good about checking it (gshibler@tfp.org). Last edited by gshibler; 06-24-2005 at 06:12 PM.

06-24-2005, 09:40 PM	#2
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,620	That sounds like a nice chassis to upgrade a 3/4 ton truck to 1 ton, if I only had the space BTW I'm about 1hr. South of Harrisburg, I'm currently selling my 3/4 ton but if it don't sell, I be contacting you __________________ Paul How do you make the invisible, visible?.........You take it away.

06-24-2005, 10:28 PM	#3
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	How bad is the cab itself? I need a junker donor cab that I can have some fun cutting up. I need the roof, backwall and the floor to be solid(fromt he backwall to the middle of the floor, right behind the trannyhump... Got any pics you can show of it? I will be headed out that way in a week or two so I could pick up... Also, could use the windowframes from the doors. L8R - Joe __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

06-25-2005, 01:38 AM	#4
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	Before you scrap it I would pull the rear hub and drum assemblies. If they are good you will be able to sell them. My 71 C30 was just stranded in Indiana because I couldn't find a drum nearby. Front end would be good if someone nearby was changing out to disk brakes on a 70 or older. I haven't looked at replacement rotors cost so I don't know if they are worth pulling. __________________ Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087

06-25-2005, 07:58 AM	#5
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,474	and 2 the board from west 10-uh-c __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

06-27-2005, 11:00 AM	#6
gshibler Registered User Join Date: Apr 2004 Location: Herndon PA Posts: 26	Pics Sorry I couldnt get to this before the weekend. The pictures of the frame attempt to show the rust. The one real bad spot is where the leaf spring shackle bolts up. There is about a two inch hole rusted right in the middle. unfortunately it is in shadow. I dont know if I should just cut the thing up or if it is still worth something to somebody Attached Images Last edited by gshibler; 06-27-2005 at 11:01 AM.

06-27-2005, 11:05 AM	#7
gshibler Registered User Join Date: Apr 2004 Location: Herndon PA Posts: 26	more pics The truck had a dump bed, so the tranny has the aux PTO I dont know if this was factory or not. That is what is welded onto the back of the frame. We had to cut it to get the dump frame off Attached Images Last edited by gshibler; 06-27-2005 at 11:08 AM.

06-27-2005, 11:08 AM	#8
stueber68 1968 C20 Vortec Beast Join Date: Jun 2005 Location: STILLWATER,OKLAHOMA Posts: 483	Where are you? I might be interested in the chasis.

06-27-2005, 11:10 AM	#9
gshibler Registered User Join Date: Apr 2004 Location: Herndon PA Posts: 26	If anyone needs more info or specific pics just email or call me, and Ill try to get them together. If no one wants the frame, by next week ill probably cut it up, and take it in for scrap.

11-05-2011, 10:10 PM	#12
Shaun1162 Registered User Join Date: Aug 2010 Location: NH Posts: 368	Re: 1972 C30 rolling chassis Definately don't scrap the Eaton H072 rearend... You can get a couple bucks for that, Jeep guys like them too __________________ - 2010 Silverado - 1984 Chevy M1028 (K-30) - 1969 Chevy C-30 - 1933 Ford Stock Car

11-06-2011, 01:40 AM	#13
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1972 C30 rolling chassis This thread WAS dead...

11-06-2011, 10:14 AM	#14
fine69 Senior Member Join Date: Dec 1999 Location: Urbana,Ohio,USA Posts: 4,618	Re: 1972 C30 rolling chassis And it shall remain. __________________ 2008 Chevy HHR 1/2 panel. 1949 Chevy Panel truck(just sittin, waiting) Board member #6



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.