Parting out rusty '86 GMC Suburban - The 1947 - Present Chevrolet & GMC Truck Message Board Network

schnitz · 06-29-2005, 04:36 PM

I'm going to be parting out my '87 GMC. I'm keeping the front doors, fenders, and hood. It's pretty rough, but I'm going to use what I can body and light wise to fix my '84 plowtruck. It has good axles, and a decent trans and tranfer case. Here's a couple of pics... Make an offer on what you want, but you'll need to pay shipping.

**Ironhorse** · 06-29-2005, 05:00 PM

Can't tell from the pic but what condition is the dash pad? If no cracks, tears or breaks I'm interested. $$$ and shipping to 67152 zip. Thanks, and this makes my 1,000th post.

clarkjw24 · 06-29-2005, 05:08 PM

FI right? How much for the engine wiring harness from the firewall out, ecm and harness with the sensors (knock, oil press switch, map, temp, etc.) and throttle body. I've got a truck that use to be TBI but its got a carb now. I would like to convert it back. I don't need the intake just the other TBI stuff.

schnitz · 06-29-2005, 05:12 PM

It's cracked, not real bad, but yeah, it's cracked. Dang sun...

I've also got a headlight bezel (left front) for an '84 Chevy (I swapped the ones from the 'burb to the plowtruck). I still have the center chrome (??) trim piece from the right front. It has no dings.

schnitz · 06-29-2005, 07:22 PM

Sorry Clarkjw24, it's a computer carbed 'burb. I'm pulling the 350 to use in my Monte Carlo. Here's some more pics of it.... The running boards are in pretty decent shape, but shipping would probably keep anybody from wanting them. The grille has one crack in it. Probably repairably, I just don't know how. The bumpers are slightly dinged (show me a real truck that doesn't have character marks

) Basically this thing was too cobble-jobbed to save. Maybe I can salvage my plowtruck (in the 4th pic) to save face with my wife.

woody96 · 06-30-2005, 09:40 AM

What condition are the mirrors in and what would you want for them shipped to SC? THX!!!

*bisquik65* · 06-30-2005, 04:17 PM

How much for the visor on the roof shipped to 28705 western n.c. Thanks,Interested in it...Erick

schnitz · 06-30-2005, 04:55 PM

I'm sorta new to shipping stuff, and I'll only deal with UPS for now. That is until I find something else cheaper. So please be patient with me on possible misquotes on shipping costs. I'll try as best I can to be accuate, but please double check for your own prices, TIA. Everything will go from my 54401 zip code. I got a quote of $28 for the visor to your zip. (best ballpark estimate I got quick for you using UPS ground w/ me packing it and a 10 lb. weight--I know I'm high on that)

Both mirrors aren't worth anything. The passenger side is broken and the driver's side mirror is peeling off from the middle. The base parts and the mirror arms are decent, though.

*bisquik65* · 06-30-2005, 06:33 PM

[QUOTE=schnitz]I'm sorta new to shipping stuff, and I'll only deal with UPS for now. That is until I find something else cheaper. So please be patient with me on possible misquotes on shipping costs. I'll try as best I can to be accuate, but please double check for your own prices, TIA. Everything will go from my 54401 zip code. I got a quote of $28 for the visor to your zip. (best ballpark estimate I got quick for you using UPS ground w/ me packing it and a 10 lb. weight--I know I'm high on that)

Thats is good enough for me,how much do you need for the visor...That is about right for shipping..Please let me know ,Thanks,Erick

06-29-2005, 04:36 PM	#1
schnitz Registered User Join Date: Apr 2005 Location: Central Wisconsin Posts: 34	Parting out rusty '86 GMC Suburban I'm going to be parting out my '87 GMC. I'm keeping the front doors, fenders, and hood. It's pretty rough, but I'm going to use what I can body and light wise to fix my '84 plowtruck. It has good axles, and a decent trans and tranfer case. Here's a couple of pics... Make an offer on what you want, but you'll need to pay shipping. Attached Images __________________ In a while, Chet. '84 Chevy 4x4 plowtruck w/ 8' Western '97 Chevy C1500 ex-cab 3rd door 5.7 Vortec And gone but never to be forgotten, my old '93 C1500 ex cab, 4.3 non-Vortec, 5 speed manual. R.I.P. 'Ole Red 2-25-05 Last edited by schnitz; 06-29-2005 at 04:39 PM.

06-29-2005, 05:00 PM	#2
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Can't tell from the pic but what condition is the dash pad? If no cracks, tears or breaks I'm interested. $$$ and shipping to 67152 zip. Thanks, and this makes my 1,000th post. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

06-29-2005, 05:08 PM	#3
clarkjw24 I like cheese Join Date: Aug 2004 Location: McBee, SC Posts: 192	FI right? How much for the engine wiring harness from the firewall out, ecm and harness with the sensors (knock, oil press switch, map, temp, etc.) and throttle body. I've got a truck that use to be TBI but its got a carb now. I would like to convert it back. I don't need the intake just the other TBI stuff. __________________ Cruiser: 1972 K5, 400/TH350/NP205, D44 and 12Bolt, 35 TSLs. Trail rig: 86 K5, 350 TBI, SM465/NP205, 5.13s, 14ff locked, h1 beadlocks, 42" TSLs, 64" rears, 56" fronts, D60 locked, 35pline, drive flanges, crossover, hydro assist, OBA. Tow rig: 2002 F350 PSD CC Dually FX4, chipped, cold air intake, BFGs Last edited by clarkjw24; 06-29-2005 at 05:09 PM.

06-29-2005, 05:12 PM	#4
schnitz Registered User Join Date: Apr 2005 Location: Central Wisconsin Posts: 34	It's cracked, not real bad, but yeah, it's cracked. Dang sun... I've also got a headlight bezel (left front) for an '84 Chevy (I swapped the ones from the 'burb to the plowtruck). I still have the center chrome (??) trim piece from the right front. It has no dings. __________________ In a while, Chet. '84 Chevy 4x4 plowtruck w/ 8' Western '97 Chevy C1500 ex-cab 3rd door 5.7 Vortec And gone but never to be forgotten, my old '93 C1500 ex cab, 4.3 non-Vortec, 5 speed manual. R.I.P. 'Ole Red 2-25-05

06-29-2005, 07:22 PM	#5
schnitz Registered User Join Date: Apr 2005 Location: Central Wisconsin Posts: 34	Sorry Clarkjw24, it's a computer carbed 'burb. I'm pulling the 350 to use in my Monte Carlo. Here's some more pics of it.... The running boards are in pretty decent shape, but shipping would probably keep anybody from wanting them. The grille has one crack in it. Probably repairably, I just don't know how. The bumpers are slightly dinged (show me a real truck that doesn't have character marks ) Basically this thing was too cobble-jobbed to save. Maybe I can salvage my plowtruck (in the 4th pic) to save face with my wife. Attached Images __________________ In a while, Chet. '84 Chevy 4x4 plowtruck w/ 8' Western '97 Chevy C1500 ex-cab 3rd door 5.7 Vortec And gone but never to be forgotten, my old '93 C1500 ex cab, 4.3 non-Vortec, 5 speed manual. R.I.P. 'Ole Red 2-25-05

06-30-2005, 09:40 AM	#6
woody96 Registered User Join Date: Jan 2005 Location: Chapin, SC Posts: 392	Mirrors?? What condition are the mirrors in and what would you want for them shipped to SC? THX!!! __________________ "Fighting for our freedoms....."

06-30-2005, 04:17 PM	#7
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	How much for the visor on the roof shipped to 28705 western n.c. Thanks,Interested in it...Erick

06-30-2005, 04:55 PM	#8
schnitz Registered User Join Date: Apr 2005 Location: Central Wisconsin Posts: 34	I'm sorta new to shipping stuff, and I'll only deal with UPS for now. That is until I find something else cheaper. So please be patient with me on possible misquotes on shipping costs. I'll try as best I can to be accuate, but please double check for your own prices, TIA. Everything will go from my 54401 zip code. I got a quote of $28 for the visor to your zip. (best ballpark estimate I got quick for you using UPS ground w/ me packing it and a 10 lb. weight--I know I'm high on that) Both mirrors aren't worth anything. The passenger side is broken and the driver's side mirror is peeling off from the middle. The base parts and the mirror arms are decent, though. __________________ In a while, Chet. '84 Chevy 4x4 plowtruck w/ 8' Western '97 Chevy C1500 ex-cab 3rd door 5.7 Vortec And gone but never to be forgotten, my old '93 C1500 ex cab, 4.3 non-Vortec, 5 speed manual. R.I.P. 'Ole Red 2-25-05

06-30-2005, 06:33 PM	#9
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	[QUOTE=schnitz]I'm sorta new to shipping stuff, and I'll only deal with UPS for now. That is until I find something else cheaper. So please be patient with me on possible misquotes on shipping costs. I'll try as best I can to be accuate, but please double check for your own prices, TIA. Everything will go from my 54401 zip code. I got a quote of $28 for the visor to your zip. (best ballpark estimate I got quick for you using UPS ground w/ me packing it and a 10 lb. weight--I know I'm high on that) Thats is good enough for me,how much do you need for the visor...That is about right for shipping..Please let me know ,Thanks,Erick



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.