Scrap sale, lots of C/K parts for cheap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

75-K5 · 07-10-2005, 11:44 PM

I've started taking my '82 K20 apart to junk it and am saving all useable parts off it. Here is a brief list of some of the things up for grabs (there are many more parts than this): Everything is OBO, I'm just pulling this stuff to help some people out if they need cheap parts as I hate to see it all go to waste and get melted down. Everything located in Anderson, Indiana and I'm willing to ship just about anything as long as its feasible.

Steering column (non-tilt, manual version) - $20

Brake booster & MC - $15

Accelerator pedal & bracket (2 avail.) - $7

Brake pedal & bracket (for automatic) - $10

Clutch & brake pedals & bracket w/linkage - $30

"Scottsdale 20" emblems (2 avail.)- $5 ea.

Blue shoulder belts - $10 ea.

Heater control panel - $5

Front 10 bolt 6-lug, needs driver's side lockout, 3.08 I believe - $50

Rear 10 bolt 6-lug, welded, 3.08 I believe - $50

Chrome front bumper, very good shape, with marker lights - $40 (pic on request)

Headlight & engine wiring harnesses(may not be 100% complete) - $5 ea.

Main in-cab wiring harness w/fuse panel(may not be 100% complete) - $7

Windshield (fits '73-'87), no cracks, w/rearview mirror & antenna - $100

Blue sunvisors, OK shape, - $2 ea.

Wiper switch (non-delay) - $1

Wiper motor - $5

Wiper linkage & studs - $5

Parking brake pedal & bracket - $10

Cowl panel, black, no rust, fits '81-'87 (I think) - $10

Heater motor (not sure if it works) - $5

Hood hinges (bolt to cowl) - $5

Power steering boxes (2 avail.) - $15

Taillight lenses (2 avail.) - $2 ea.

Gauge pod for '82 - $25

Individual gauges for '75 - $5 ea. ($10 for speedo)

Plastic dash piece around gauges, one each for '75 and '82 - $5 ea.

Glove box, blue - $5

I've got more parts than this, so if you need something just speak up and I'll check to see if I have it laying around. I can take pictures of anything upon request. I'll try to be prompt in getting back with people but I have an extremely busy schedule and it's hard to log in and reply to messages during the week but I'll make it a point this week to do it. Thanks for looking!

woody96 · 07-11-2005, 08:00 AM

Got any rally wheel trim rings??

fade94 · 07-11-2005, 08:13 AM

How are are the tranny to rad lines? Interested in inside wiring harness if it had all power and A/C. Also interested in under hood harness. Price and shipping for tranny lines if good, under hood harness and interior harness to 75454 please.

skeet85silverado · 07-11-2005, 09:23 AM

can you send me picture of the seatbelts.

skeet85silverado · 07-11-2005, 09:29 AM

do you have a picture of seatbelts

86 GMG · 07-11-2005, 11:19 AM

pic of bumper and shipping to 74145 i know friegt will be alittle expinsive but i cant find a good bumper like your around here let me know i can recieve freight like this a work all day long no problem i have docks and truck access

ben@speedbarn · 07-11-2005, 11:37 AM

Can I see a picture of the heater controls? You can email it to bjbishop@uss.com if it's easier than posting.

offroad84chevy · 07-11-2005, 11:59 AM

i need stock manifolds for a 350 and the y-pipe please. thanks

augie · 07-11-2005, 12:49 PM

Do you have the Quad headlights? I need the chrome trim pieces which bracket the grill [ ] on either side of the headlights.

woody96 · 07-12-2005, 09:28 AM

Again, wanted to ask if there was any trim rings for rally rims??

75-K5 · 07-12-2005, 03:54 PM

Wow, I didn't expect this many responses. OK, let me go down the line here.

woody96: Sorry, the truck doesn't have rallies on it.

fade94: It was a sm465 truck, so there are no tranny cooler lines.

skeet85silverado: Sure, I'll send you some pics tomorrow evening.

86 GMG: I'll send you a few pics tomorrow as well and work on getting a shipping quote.

ben@speedbarn: No problem, pics on their way tomorrow.

offroad84chevy: Crap, I've still got that grill. I'll knock 15 more bucks off the price for being so dumb and slow in getting it to you. Just now was able to get the front clip off. Sorry, the truck didn't have an engine when I bought it so no exhaust parts.

augie76: Sorry, the bezels broke when I was removing the grille and front fenders. These weren't chrome anyway, they were plastic.

fade94 · 07-12-2005, 04:39 PM

What about the wiring I asked about?

Blue_71 · 07-12-2005, 05:20 PM

lifted steering arm for 2-4" lift?

i have a friend who would probably be interested in the front axle, and i may be interested in the SM465 and t-case if its up for sale

75-K5 · 07-13-2005, 02:13 AM

Sorry about the wiring harness, I'll get a quote on that and get it shipped to you.

Blue_71, I guess I forgot to mention that even though it was a sm465 truck, when I got it it had no engine or tranny in it, and I'm hanging on to the axles to swap into my K5. It was stock height so no lift parts. Sorry

jesse977 · 07-13-2005, 02:37 AM

is the glovebox non a/c??

fade94 · 07-13-2005, 08:00 AM

Both harnesses that you have. If power doors, really need the wiring for them as well. Shipping to 75454. thanks

86 GMG · 07-13-2005, 01:37 PM

75-k5 any luck on a pic of bumper and freight ???? no hurry just curious at this time

75-K5 · 07-13-2005, 03:26 PM

Sorry, didn't get up in time for work to take a pic but I will do that this afternoon, as well as take pics that I owe everyone else.

75-K5 · 07-13-2005, 09:17 PM

Jesse77, the truck didn't have a/c so I would say yes. I wasn't aware it made a difference on the glovebox though. Interesting.

75-K5 · 07-13-2005, 09:28 PM

fade94, did you still want the in-cab harness even though it didn't have A/C or power windows/doors?

fade94 · 07-14-2005, 10:08 AM

No, I guess it reall wouldn't do me any good without all the connections. Thanks though.

75-K5 · 07-16-2005, 01:06 AM

So just the under hood harness or did you want to nix the whole thing? Just checking so I know how to proceed.

fade94 · 07-16-2005, 03:04 PM

Without the A/C wiring, it really doesn't help me. Thanks anyway.

gldevall · 07-16-2005, 10:07 PM

Quote:

Originally Posted by 75-K5

Plastic dash piece around gauges, one each for '75 and '82 - $5 ea.

Is this the black plastic gauge bezel? If so, shoot me some pics of the '82 to gldevall@charter.net

Thanks.

75-K5 · 07-18-2005, 07:04 PM

Yeah, I believe that's what you call it, let me get a couple pics and send them your way later.

07-10-2005, 11:44 PM	#1
75-K5 Bucket of Bolts Join Date: Dec 2003 Location: Anderson, Indiana Posts: 455	Scrap sale, lots of C/K parts for cheap I've started taking my '82 K20 apart to junk it and am saving all useable parts off it. Here is a brief list of some of the things up for grabs (there are many more parts than this): Everything is OBO, I'm just pulling this stuff to help some people out if they need cheap parts as I hate to see it all go to waste and get melted down. Everything located in Anderson, Indiana and I'm willing to ship just about anything as long as its feasible. Steering column (non-tilt, manual version) - $20 Brake booster & MC - $15 Accelerator pedal & bracket (2 avail.) - $7 Brake pedal & bracket (for automatic) - $10 Clutch & brake pedals & bracket w/linkage - $30 "Scottsdale 20" emblems (2 avail.)- $5 ea. Blue shoulder belts - $10 ea. Heater control panel - $5 Front 10 bolt 6-lug, needs driver's side lockout, 3.08 I believe - $50 Rear 10 bolt 6-lug, welded, 3.08 I believe - $50 Chrome front bumper, very good shape, with marker lights - $40 (pic on request) Headlight & engine wiring harnesses(may not be 100% complete) - $5 ea. Main in-cab wiring harness w/fuse panel(may not be 100% complete) - $7 Windshield (fits '73-'87), no cracks, w/rearview mirror & antenna - $100 Blue sunvisors, OK shape, - $2 ea. Wiper switch (non-delay) - $1 Wiper motor - $5 Wiper linkage & studs - $5 Parking brake pedal & bracket - $10 Cowl panel, black, no rust, fits '81-'87 (I think) - $10 Heater motor (not sure if it works) - $5 Hood hinges (bolt to cowl) - $5 Power steering boxes (2 avail.) - $15 Taillight lenses (2 avail.) - $2 ea. Gauge pod for '82 - $25 Individual gauges for '75 - $5 ea. ($10 for speedo) Plastic dash piece around gauges, one each for '75 and '82 - $5 ea. Glove box, blue - $5 I've got more parts than this, so if you need something just speak up and I'll check to see if I have it laying around. I can take pictures of anything upon request. I'll try to be prompt in getting back with people but I have an extremely busy schedule and it's hard to log in and reply to messages during the week but I'll make it a point this week to do it. Thanks for looking! __________________ This is the project that never ends, yes it goes on and on my friend....

07-11-2005, 08:00 AM	#2
woody96 Registered User Join Date: Jan 2005 Location: Chapin, SC Posts: 392	Got any rally wheel trim rings?? __________________ "Fighting for our freedoms....."

07-11-2005, 08:13 AM	#3
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	Parts How are are the tranny to rad lines? Interested in inside wiring harness if it had all power and A/C. Also interested in under hood harness. Price and shipping for tranny lines if good, under hood harness and interior harness to 75454 please. __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear Last edited by fade94; 07-11-2005 at 09:33 AM.

07-11-2005, 09:23 AM	#4
skeet85silverado Registered User Join Date: May 2004 Location: warner robins ga Posts: 158	seatbelt can you send me picture of the seatbelts.

07-11-2005, 09:29 AM	#5
skeet85silverado Registered User Join Date: May 2004 Location: warner robins ga Posts: 158	seatbelt do you have a picture of seatbelts

07-11-2005, 11:19 AM	#6
86 GMG Registered User Join Date: Apr 2005 Location: Tulsa Oklahoma Posts: 943	pic of bumper and shipping to 74145 i know friegt will be alittle expinsive but i cant find a good bumper like your around here let me know i can recieve freight like this a work all day long no problem i have docks and truck access __________________ square body trucks an addiction or an investment either way they consume all my extra time and money

07-11-2005, 11:37 AM	#7
ben@speedbarn Done yet? Join Date: Jun 2005 Location: Pittsburgh Posts: 118	Can I see a picture of the heater controls? You can email it to bjbishop@uss.com if it's easier than posting.

07-11-2005, 11:59 AM	#8
offroad84chevy Registered User Join Date: Jun 2003 Location: CT Posts: 75	i need stock manifolds for a 350 and the y-pipe please. thanks __________________ Theres no replacment for displacement! http://www.cardomain.com/memberpage/438572 1982 k10 work in progress 1984 lifted chevy k10 for sale or trade

07-11-2005, 12:49 PM	#9
augie Waiting for Paul to Open Safe Join Date: May 2005 Location: Everett, WA Posts: 4,570	Headlight Trim? Do you have the Quad headlights? I need the chrome trim pieces which bracket the grill [ ] on either side of the headlights.

07-12-2005, 09:28 AM	#10
woody96 Registered User Join Date: Jan 2005 Location: Chapin, SC Posts: 392	Again, wanted to ask if there was any trim rings for rally rims?? __________________ "Fighting for our freedoms....."

07-12-2005, 03:54 PM	#11
75-K5 Bucket of Bolts Join Date: Dec 2003 Location: Anderson, Indiana Posts: 455	Wow, I didn't expect this many responses. OK, let me go down the line here. woody96: Sorry, the truck doesn't have rallies on it. fade94: It was a sm465 truck, so there are no tranny cooler lines. skeet85silverado: Sure, I'll send you some pics tomorrow evening. 86 GMG: I'll send you a few pics tomorrow as well and work on getting a shipping quote. ben@speedbarn: No problem, pics on their way tomorrow. offroad84chevy: Crap, I've still got that grill. I'll knock 15 more bucks off the price for being so dumb and slow in getting it to you. Just now was able to get the front clip off. Sorry, the truck didn't have an engine when I bought it so no exhaust parts. augie76: Sorry, the bezels broke when I was removing the grille and front fenders. These weren't chrome anyway, they were plastic. __________________ This is the project that never ends, yes it goes on and on my friend....

07-12-2005, 04:39 PM	#12
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	What about the wiring I asked about? __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

07-13-2005, 02:13 AM	#14
75-K5 Bucket of Bolts Join Date: Dec 2003 Location: Anderson, Indiana Posts: 455	Sorry about the wiring harness, I'll get a quote on that and get it shipped to you. Blue_71, I guess I forgot to mention that even though it was a sm465 truck, when I got it it had no engine or tranny in it, and I'm hanging on to the axles to swap into my K5. It was stock height so no lift parts. Sorry __________________ This is the project that never ends, yes it goes on and on my friend....

07-13-2005, 02:37 AM	#15
jesse977 Registered User Join Date: Jun 2004 Location: Los Angeles Posts: 277	is the glovebox non a/c??

07-13-2005, 08:00 AM	#16
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	Both harnesses that you have. If power doors, really need the wiring for them as well. Shipping to 75454. thanks __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear Last edited by fade94; 07-13-2005 at 02:43 PM.



Register or Log In To remove these advertisements.

07-13-2005, 01:37 PM	#17
86 GMG Registered User Join Date: Apr 2005 Location: Tulsa Oklahoma Posts: 943	75-k5 any luck on a pic of bumper and freight ???? no hurry just curious at this time __________________ square body trucks an addiction or an investment either way they consume all my extra time and money

07-13-2005, 03:26 PM	#18
75-K5 Bucket of Bolts Join Date: Dec 2003 Location: Anderson, Indiana Posts: 455	Sorry, didn't get up in time for work to take a pic but I will do that this afternoon, as well as take pics that I owe everyone else. __________________ This is the project that never ends, yes it goes on and on my friend....

07-13-2005, 09:17 PM	#19
75-K5 Bucket of Bolts Join Date: Dec 2003 Location: Anderson, Indiana Posts: 455	Jesse77, the truck didn't have a/c so I would say yes. I wasn't aware it made a difference on the glovebox though. Interesting. __________________ This is the project that never ends, yes it goes on and on my friend....

07-13-2005, 09:28 PM	#20
75-K5 Bucket of Bolts Join Date: Dec 2003 Location: Anderson, Indiana Posts: 455	fade94, did you still want the in-cab harness even though it didn't have A/C or power windows/doors? __________________ This is the project that never ends, yes it goes on and on my friend....

07-14-2005, 10:08 AM	#21
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	No, I guess it reall wouldn't do me any good without all the connections. Thanks though. __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

07-16-2005, 01:06 AM	#22
75-K5 Bucket of Bolts Join Date: Dec 2003 Location: Anderson, Indiana Posts: 455	So just the under hood harness or did you want to nix the whole thing? Just checking so I know how to proceed. __________________ This is the project that never ends, yes it goes on and on my friend....

07-16-2005, 03:04 PM	#23
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	Without the A/C wiring, it really doesn't help me. Thanks anyway. __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

07-18-2005, 07:04 PM	#25
75-K5 Bucket of Bolts Join Date: Dec 2003 Location: Anderson, Indiana Posts: 455	Yeah, I believe that's what you call it, let me get a couple pics and send them your way later. __________________ This is the project that never ends, yes it goes on and on my friend....

Register or Log In To remove these advertisements.