|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
06-22-2002, 03:14 PM
|
#1 |
|
Senior Member
 
Join Date: Mar 2001
Location: From Kansas now in Palmer, Alaska
Posts: 807
|
# of splines on NP205 front output shaft
from a 72 Np-205 with a th-350. Also does anybody know wheather they used more than one kind of way of hooking the front driveshaft to the front output shaft? Mine has the yoke to bolt up a u-joint to it, but the driveshaft i just bought has a different CV joint with about a 4inch diameter ring that bolts to another piece. any help would be greatly appreciated. thanks
john |
|
|
|
06-22-2002, 04:32 PM
|
#2 |
|
Currently Blazerless
Join Date: Apr 2000
Location: St. Joseph Mo.
Posts: 4,828
|
John, np-205's behind th-350's used 10 spine front output shaft's with a yoke up until 77 or 78 [ I think it was a midyear change] after that they used 30 spline output's with a companion flange, it sounds like you have the drive flange stlye shaft from a 77 up truck and I'm pretty sure they dont make a flange for your 10 spline output, you may be able to change out the flange from the back half of your cv for the yoke style.
__________________
1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
