Thread Missing?!?!?!? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*72longbed* · 07-23-2005, 07:23 AM

I will attempt to re-list my search here today and ask that any Member, Administrator or other knowledgable person express their opinion on whether my requests are unusual, illegal or otherwise different from what other members have been requesting for as long as this WebSite has been in existance. Here goes:

WTB: (wanted to buy) a 71/72 CAB from a 4x4, 3/4 ton pickup, Longbed. Must have a Title and valid VIN plate with it. Will consider a Frame from same type truck, but it must have a valid Title and VIN plate with it. Either one or both of these parts can be in totally rusted out junk, scrap, crap condition, doesn't matter.

There...., thats it. Thank you all for letting me vent my frustration.
Sincerely,
72longbed

*72longbed* · 07-23-2005, 09:31 PM

ttt

vtblazer · 07-24-2005, 09:00 AM

Willing to travel to VT?
Have a 3/4 ton 4x4 chassis, let me make sure about the title first though...
Don't need titles in VT for these old trucks so I gotta check.

*72longbed* · 07-24-2005, 03:59 PM

Yes VT,
please check to see if you have the VIN plate that would be in the drivers side door pillar, AND the TITLE. I need both to be legal in PA.

Thank you for looking into it, and I look forward to hearing back from you.

72longbed

*72longbed* · 07-25-2005, 06:09 PM

ttt

vtblazer · 07-25-2005, 06:18 PM

Hey sorry, no title to that truck.

**JIMs70GMC** · 07-26-2005, 08:49 PM

If it's 3/4 ton 4wd then it can only be 127". no shortbeds, no longhorns

Blue_71 · 07-26-2005, 10:10 PM

did your 2wd have a v8? by VT's vin number, the S means it was 6 cylinder

vtblazer · 07-26-2005, 10:27 PM

Quote:

Originally Posted by Blue_71

did your 2wd have a v8? by VT's vin number, the S means it was 6 cylinder

Correct, 292 inline.

What would the gears in the axels most likely be? Any idea?
4:11's or 4:56's?
Those 3/4 ton axels are heading for my blazer soon.

Blue_71 · 07-26-2005, 10:29 PM

i guess i should have mentioned that my comment was to say that may be why the 4x4 has a lower GVWR, LOL. im not really sure what gears it should have, but my guess would be 4.11... i have a book for 71 that tells, but dunno if it would be same for 72

*72longbed* · 07-27-2005, 11:50 AM

vtblazer,
I'd be very interesred in knowing what the process is in VT. to transfer ownership to me here in PA. Also if there is a document, (Title or Ownership Affidavid) that you can get from the State of VT. that would make the transfer more easy here in PA? Thanks for looking into this, I am very interested in doing this with you.

72longbed

07-23-2005, 07:23 AM	#1
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Thread Missing?!?!?!? I will attempt to re-list my search here today and ask that any Member, Administrator or other knowledgable person express their opinion on whether my requests are unusual, illegal or otherwise different from what other members have been requesting for as long as this WebSite has been in existance. Here goes: WTB: (wanted to buy) a 71/72 CAB from a 4x4, 3/4 ton pickup, Longbed. Must have a Title and valid VIN plate with it. Will consider a Frame from same type truck, but it must have a valid Title and VIN plate with it. Either one or both of these parts can be in totally rusted out junk, scrap, crap condition, doesn't matter. There...., thats it. Thank you all for letting me vent my frustration. Sincerely, 72longbed Last edited by 72longbed; 07-25-2005 at 06:08 PM.

07-23-2005, 09:31 PM	#2
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	ttt Last edited by 72longbed; 07-23-2005 at 09:32 PM.

07-26-2005, 08:49 PM	#7
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	If it's 3/4 ton 4wd then it can only be 127". no shortbeds, no longhorns __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

07-27-2005, 11:50 AM	#11
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Transfer Info? vtblazer, I'd be very interesred in knowing what the process is in VT. to transfer ownership to me here in PA. Also if there is a document, (Title or Ownership Affidavid) that you can get from the State of VT. that would make the transfer more easy here in PA? Thanks for looking into this, I am very interested in doing this with you. 72longbed

07-24-2005, 09:00 AM	#3
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Willing to travel to VT? Have a 3/4 ton 4x4 chassis, let me make sure about the title first though... Don't need titles in VT for these old trucks so I gotta check.

07-24-2005, 03:59 PM	#4
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Yes VT, please check to see if you have the VIN plate that would be in the drivers side door pillar, AND the TITLE. I need both to be legal in PA. Thank you for looking into it, and I look forward to hearing back from you. 72longbed

07-25-2005, 06:09 PM	#5
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	ttt

07-25-2005, 06:18 PM	#6
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Hey sorry, no title to that truck.

07-26-2005, 10:10 PM	#8
Blue_71 Bloo Join Date: Feb 2001 Location: Barren County Kentucky Posts: 6,283	did your 2wd have a v8? by VT's vin number, the S means it was 6 cylinder



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.